Netcomm NB3 User manual

Netcomm
Brand
Netcomm
Model
NB3
Category
Routers
Type
User manual

Netcomm NB3

Netcomm NB3 is a fully functional ADSL modem and router that you need to activate and operate a broadband ADSL Internet service. It is an indispensable part of broadband success. You can enjoy ADSL (Asymmetric Digital Subscriber Line) technology to access the Internet at speeds up to 150 times faster than a 56K dial-up – quickly and easily.

You can use your NB3 to establish an ADSL connection on a single PC simply by using the USB port. Or you can connect to your ADSL connection by using the NB3’s built-in Ethernet port.

The NB3 employs the latest protocols and has been thoroughly tested for full compliance with Australian conditions.

Netcomm NB3

Netcomm NB3 is a fully functional ADSL modem and router that you need to activate and operate a broadband ADSL Internet service. It is an indispensable part of broadband success. You can enjoy ADSL (Asymmetric Digital Subscriber Line) technology to access the Internet at speeds up to 150 times faster than a 56K dial-up – quickly and easily.

You can use your NB3 to establish an ADSL connection on a single PC simply by using the USB port. Or you can connect to your ADSL connection by using the NB3’s built-in Ethernet port.

The NB3 employs the latest protocols and has been thoroughly tested for full compliance with Australian conditions.

ADSL
Your essential high-speed ADSL connection for home or office
Now you can enjoy ADSL (Asymmetric Digital Subscriber Line) technology to access the Internet
at speeds up to 150 times faster than a 56K dial-up – quickly and easily.
This is the essential ADSL modem and router that you need to activate and operate a broadband
ADSL Internet service. Containing everything you need to get up and running with one computer,
the NetComm NB3 is an indispensable part of broadband success.
EASY INSTALL & SET-UP
You can install the NetComm NB3 in minutes, using NetComm’s set-up that has been specially
developed for Australian ISPs.
You can use your NB3 to establish an ADSL connection on a single PC simply by using the USB
port. Or you can connect to your ADSL connection by using the NB3’s built-in Ethernet port.
The NB3 employs the latest protocols and has been thoroughly tested for full compliance with
Australian conditions. And you can rest easy that you have bought another reliable product from
NetComm, Australia’s only data communications company. Since 1981, Australians have relied
on NetComm to meet their data communication needs.
U
s
e
y
o
u
r
e
x
i
s
t
i
n
g
p
h
o
n
e
l
i
n
e
MICRO
FILTER
INSIDE
Connect via
Ethernet or USB
Easy install for
Australian ISPs
NB3
Ethernet/USB ADSL Modem Router
My ADSL Modem
My ADSL Modem
Fully functional ADSL Modem
10/100 Ethernet and USB port for easy connection to a single PC
NETCOMM LIMITED
ABN 85 002 490 486
2-6 Orion Road
LANE COVE
NSW 2066
phone 02 9424 2070
fax 02 9424 2010
email [email protected]
For more information,
please visit
www.netcomm.com.au
Australia connects with
NB3
Your Netcomm dealer:
NetComm is Australia’s dynamic data communications and
networking solutions provider. For more information on this and
other NetComm products, please visit www.netcomm.com.au
NetComm Limited ABN 85 002 490 486
PO Box 1200, Lane Cove NSW 2066 Australia.
PHONE (02) 9424 2070 • FAX (02) 9424 2010
www.netcomm.com.au • EMAIL [email protected]
Trademarks and registered trademarks are the property of NetComm
Limited or their respective owners. Specifications are subject to change
without notice. Images shown may vary slightly from the product.
Compliant with ADSL standards Full-rate
ANSI T1.413 Issue 2, ITU 992.2 (G-lite) and
ITU 992.1 (G.dmt)
Supports RFC1483 (Ethernet over ATM),
RFC2364 (PPP over ATM), RFC2516 (PPP
over Ethernet), and RFC1577 (Classical IP
over ATM) data encapsulation formats
DMT modulation and demodulation
Full-rate adaptive modem
MAX DOWNSTREAM rate 8Mbps
MAX UPSTREAM rate 800Kbps
USB interface
Compliant with USB 1.1 specification
Ethernet interface
Compliant with IEEE 802.3 standard
10BaseT/100BaseTX, 10/100 Mbps
Auto-selection of which host interface
is active
H web-based management access via SNMP,
http and CLI (over Telnet and RS-232)
DSL-aware ATM shaper supports UBR, GFR,
CBR and VBR traffic
Embedded NAT firewall and IP filtering
FEATURES
Windows
®
98/98SE/2000/ME/XP
Windows
®
NT (Ethernet port only)
Mac OS 9.x/10.x (Ethernet port only)
NB3 ADSL Ethernet/USB Modem
Cat-5 RJ45 straight-through
Ethernet Cable
RJ11 Line Cord
USB Cable
EM1100 MicroFilter
605 to RJ11 Line Adaptor
Power Pack 12V DC
Driver/Manual/Utility Software CD
Installation Guide
Dimensions
139mm x 114mm x 27mm
LEDs
PW power
LK solid when ADSL in show-time;
flashing when ADSL establishing
show-time
Ethernet LINK/ACT LEDs: Green 100M
Yellow 10M
Interface
RJ-11 One standard RJ-11 connector for
ADSL line-in
RJ-45 One standard RJ-45 connector to
connect to PC (integrates
10/100M LINK/ACT LEDs)
USB One standard USB connector to
connect to PC
Reset Push to reset to factory defaults
Power One power connector 12V DC
Environmental
• Operating temperature 0~50° C
• Humidity 10~90% non-condensing
Power requirements
12V DC
1 year warranty out of the box.
Extra 2 years FREE with online
registration at www.netcomm.com.au
*Conditional upon registration online.
3 YEAR WARRANTY
*
SPECIFICATIONS
Your essential high-speed ADSL connection for home or office
RJ45 for
10/100 Ethernet
LAN connection
Power jack
for
AC power
adaptor
RJ11 for ADSL
connection to
telephone line
USB
data port
Reset/
factory
defaults
PACKAGE CONTENTS
OPERATING SYSTEM SUPPORT
N367
NB3
My ADSL Modem
My ADSL Modem
  • Page 1 1
  • Page 2 2

Netcomm NB3 User manual

Netcomm
Brand
Netcomm
Model
NB3
Category
Routers
Type
User manual

Netcomm NB3

Netcomm NB3 is a fully functional ADSL modem and router that you need to activate and operate a broadband ADSL Internet service. It is an indispensable part of broadband success. You can enjoy ADSL (Asymmetric Digital Subscriber Line) technology to access the Internet at speeds up to 150 times faster than a 56K dial-up – quickly and easily.

You can use your NB3 to establish an ADSL connection on a single PC simply by using the USB port. Or you can connect to your ADSL connection by using the NB3’s built-in Ethernet port.

The NB3 employs the latest protocols and has been thoroughly tested for full compliance with Australian conditions.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents