Lightolier FBP450L User manual

Lightolier
Brand
Lightolier
Model
FBP450L
Type
User manual

Lightolier FBP450L is an emergency ballast that provides 90 minutes of illumination during power outages. It operates a variety of fluorescent lamps, including T8, T10, T12, and compact fluorescent lamps. The ballast has a high-temperature powder coat finish and a maintenance-free battery with a 10-year lifespan. It is ideal for use in recessed luminaires and is code compliant with UL 924, NEC, NFPA70, NFPA101, and OSHA standards.

Lightolier FBP450L is an emergency ballast that provides 90 minutes of illumination during power outages. It operates a variety of fluorescent lamps, including T8, T10, T12, and compact fluorescent lamps. The ballast has a high-temperature powder coat finish and a maintenance-free battery with a 10-year lifespan. It is ideal for use in recessed luminaires and is code compliant with UL 924, NEC, NFPA70, NFPA101, and OSHA standards.

631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • B0308
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
FBP Low Profile Fluorescent Emergency Ballast FBP450L
Page 1 of 1 One Lamp Emergency Operation, 450 Lumens
Lightolier is a Philips group brand
Features
1. Lamp Operation: Operates the following lamp types: 30w to 40w (2’-4’) T8,
T10 or T12 fluorescent lamps without integral starters, including U-shaped
and 4-pin long compact fluorescent lamps (30w to 40w). It is also compat-
ible with most 1, 2, 3 and 4-lamp electronic, standard, energy saving and
dimming AC ballasts. See Lamp Operation and Performance table for spe-
cific lamp performance and operation.
2. Illumination: Provides 90 minutes of emergency illumination, and produces
a maximum of 450 lumens initial emergency light output.
3. Housing: Constructed of 20 gauge steel with a high temperature powder
coat finish. Housing allows for housing frame mounting on most recessed
luminaires.
4. Electronics: 120/277 VAC dual voltage input with solid-state circuitry.
Charging system is complete with AC indicator lamp and test switch.
5. Battery: Maintenance free, high temperature, sealed nickel cadmium bat-
tery has an estimated service life of 10 years, and an operating temperature
range of 32°F (0°C) to 131°F (55°C)
6. Input Power Requirements: 1.0 watt max.
7. Warranty: Electronics: 5 years; Battery: 5 years.
Code Compliance
UL 924 listed.
National Electrical Code (NEC).
NFPA70 and NFPA101 Life Safety Code and Illumination Standards.
OSHA Safety Code Standards
Options
EX = Special Input Transformer (specify voltage and frequency)
DL = Damp Location
Complete Fixture consists of ballast unit. Select options and accessories below.
Model # Max. Lumens Lamp Operation
FBP450L 450 One
Lamp Operation and Performance
14.0”
(35.6 cm)
13.6”
(34.5 cm)
1.5”
(3.81 cm)
1.0”
(2.54 cm)
1.0”
(2.54 cm)
LINEAR WATTAGE BASE EMERGENCY
LAMPS TYPE LAMP OPERATION
Rapid, Instant, Energy Saving 30-40 Single-Pin One
T8 through T12 Bi-Pin
(2’ - 4’)
COMPACT WATTAGE BASE EMERGENCY
LAMPS TYPE LAMP OPERATION
T5 Long Compact 30-32 2G11 One
4-Pin
  • Page 1 1

Lightolier FBP450L User manual

Lightolier
Brand
Lightolier
Model
FBP450L
Type
User manual

Lightolier FBP450L is an emergency ballast that provides 90 minutes of illumination during power outages. It operates a variety of fluorescent lamps, including T8, T10, T12, and compact fluorescent lamps. The ballast has a high-temperature powder coat finish and a maintenance-free battery with a 10-year lifespan. It is ideal for use in recessed luminaires and is code compliant with UL 924, NEC, NFPA70, NFPA101, and OSHA standards.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents