Accu-Tech 49253-LPM Product information

49253-LPM
Accu-Tech
Brand
Accu-Tech
Model
49253-LPM
Category
Cable trunking systems
Type
Product information

Accu-Tech 49253-LPM is a five-ring horizontal cable manager designed to organize and contain patch cords on the front of industry-standard 19-inch equipment racks, cabinets, and hinged wall-mounted brackets. Its five horizontal distribution rings reduce stress on stored cables and retain optimal cable geometry. The distribution rings have a radius-edged design to protect cables from nicks and tears, and they can accommodate large quantities of patch cords. This cable manager is available in a 1RU height with 4-inch deep rings and is made of 16-gauge steel with a black powder-coat finish.

Accu-Tech 49253-LPM is a five-ring horizontal cable manager designed to organize and contain patch cords on the front of industry-standard 19-inch equipment racks, cabinets, and hinged wall-mounted brackets. Its five horizontal distribution rings reduce stress on stored cables and retain optimal cable geometry. The distribution rings have a radius-edged design to protect cables from nicks and tears, and they can accommodate large quantities of patch cords. This cable manager is available in a 1RU height with 4-inch deep rings and is made of 16-gauge steel with a black powder-coat finish.

SPECIFICATION
The ve-ring cable manager shall provide the capability
to organize and contain patch cords on the front of
the manager. The front of the manager shall provide
ve horizontal distribution rings to reduce stress on
stored cables and to retain optimal cable geometry. All
distribution rings shall have edges with a radius to protect
cables from nicks and tears. Managers shall be available
in 1RU and 2RU heights with either 4-inch or 6-inch deep
rings. Models shall be available with a metal cover for
the rings. Material shall be 16-gauge steel with a black
powder-coat nish.
FEATURES
• Distribution rings are radius-edged to protect cable from
nicks or wear
• Oversized distribution rings accommodate large quantities
of patch cords
• Five-ring design reduces cord stress and improves
containment near patch panels
• Use as an alternate mode of horizontal management
between patch panels
• Managers available in 1RU and 2RU options with 4-inch
or 6-inch deep rings
• Some models available with a metal cover for the rings
DESIGN CONSIDERATIONS
• Verify adequate space for ring clearance
• Install managers above and below patch panels
• Four #12-24 screws supplied with each manager
STANDARDS COMPLIANCE
• ANSI/TIA-568-C
• cULus
• RoHS
PHYSICAL SPECIFICATIONS
Dimensions: See page two
Materials: 16-gauge steel with a black powder-coat nish
COUNTRY OF ORIGIN
See page two
WARRANTY INFORMATION
For a copy of Leviton product warranties, visit
www.leviton.com/warranty.
ELECTRONIC FILES
For CAD les, typical specs, or technical drawings (.DXF, .DWG),
visit www.leviton.com.
APPLICATION
Leviton Five-Ring Horizontal Cable Managers are ideal
for light-duty cord distribution at the front of industry-
standard 19-inch equipment racks, cabinets, and
hinged wall-mounted brackets.
PRODUCT SPECIFICATIONS
49253-xxx, 4925C-xCM
Five-Ring Horizontal Cable Managers
49253-xxx, 4925C-xCM
Page 1 of 2
Leviton Network Solutions
2222 - 222nd St. SE
Bothell, WA 98021-4416
tel 1-800-824-3005
tel +1-425-486-2222
[email protected]
www.leviton.com
Asia / Pacic
T +1.631.812.6228
E [email protected]
Canada
T +1.514.954.1840
E [email protected]
Caribbean
T +1.954.593.1896
E [email protected]
China
T +852.2774.9876
E [email protected]
Colombia
T +57.1.743.6045
E [email protected]
Europe
T +33.6.8869.1380
E [email protected]
India / SAARC
T +971.4.886.4722
E [email protected]
Mexico
T +52.55.5082.1040
E [email protected]
Middle East & Africa
T +971.4.886.4722
E [email protected]
South Korea
T +82.2.3273.9963
E [email protected]
Copyright © 2014 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
Released August 2014
49253-LPM
49253-6PM
4925C-BCM
PRODUCT SPECIFICATIONS
49253-xxx, 4925C-xCM
49253-xxx, 4925C-xCM
H14 5125
Page 2 of 2
PART NUMBERS
Description Country of Origin Part No.
Five-Ring Horizontal Cable Manager, 1RU, 4" metal rings Taiwan 49253-LPM
Five-Ring Horizontal Cable Manager, 2RU, 4" metal rings Taiwan 49253-BCM
Five-Ring Horizontal Cable Manager, 2RU, 2" metal rings USA 49253-2CM
Five-Ring Horizontal Cable Manager, 1RU, 6" metal rings USA 49253-6PM
Five-Ring Horizontal Cable Manager, 2RU, 6" metal rings USA 49253-6MR
Five-Ring Horizontal Cable Manager w/ Cover, 1RU, 4" metal rings Taiwan 4925C-LPM
Five-Ring Horizontal Cable Manager w/ Cover, 2RU, 4" metal rings Taiwan 4925C-BCM
Leviton Network Solutions
2222 - 222nd St. SE
Bothell, WA 98021-4416
tel 1-800-824-3005
tel +1-425-486-2222
[email protected]
www.leviton.com
Asia / Pacic
T +1.631.812.6228
E [email protected]
Canada
T +1.514.954.1840
E [email protected]
Caribbean
T +1.954.593.1896
E [email protected]
China
T +852.2774.9876
E [email protected]
Colombia
T +57.1.743.6045
E [email protected]
Europe
T +33.6.8869.1380
E [email protected]
India / SAARC
T +971.4.886.4722
E [email protected]
Mexico
T +52.55.5082.1040
E [email protected]
Middle East & Africa
T +971.4.886.4722
E [email protected]
South Korea
T +82.2.3273.9963
E [email protected]
Copyright © 2014 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
Released August 2014
4.50
4.00
3.50
3.50"
4.00"
4.50"
19.00
1.72
49253-LPM
2.50
49253-2CM
4.00
3.50
4.50
49253-BCM
6.00
49253-6PM
6.00
49253-6MR
Side ViewFront View Top View
Side ViewFront View Top View
Side ViewFront View Top View
Side ViewFront View Top View
Side ViewFront View Top View
1.50"
2.00"
2.50"
4.50"
3.50"
4.00"
6.00"
6.00"
3.47
19.00
19.00
3.47
1.72
19.00
3.47
19.00
6.50"
6.50"
1.72"
3.47"
3.47"
1.72"
3.47"
19.00"
19.00"
19.00"
19.00"
19.00"
  • Page 1 1
  • Page 2 2

Accu-Tech 49253-LPM Product information

49253-LPM
Accu-Tech
Brand
Accu-Tech
Model
49253-LPM
Category
Cable trunking systems
Type
Product information

Accu-Tech 49253-LPM is a five-ring horizontal cable manager designed to organize and contain patch cords on the front of industry-standard 19-inch equipment racks, cabinets, and hinged wall-mounted brackets. Its five horizontal distribution rings reduce stress on stored cables and retain optimal cable geometry. The distribution rings have a radius-edged design to protect cables from nicks and tears, and they can accommodate large quantities of patch cords. This cable manager is available in a 1RU height with 4-inch deep rings and is made of 16-gauge steel with a black powder-coat finish.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents