GE Modules Quick start guide

Brand: GE

Model: Modules

Type: Quick start guide

GE Inspection Technologies

Xray

SEIFERT WL 3001

Wasserkühlpumpe

The WL 3001 cooling aggregate has been

designed to dissipate anode heat from the

X-ray tube if, for economic or technical

reasons, direct cooling from a water sup-

ply system is impracticable.

The cooling medium can be water or a

water-glycol blend. The water circulates

between the cooling unit and the heat

source. It is recooled by a air-cooled heat

exchanger.

The maximum cooling output depends on

the difference between the temperature

at the water inlet and the temperature

at the cooling water inlet. It amounts

3000 W at the temperature difference of

11,5 K between water outlet- and ambient

temperature.

A thermostat switch is monitoring the

temperature of the cooling water.

Application

We reserve the right to technical modifications without prior notice.

GE Inspection Technologies

Xray

GEIT-30131GB (5/04)

GEInspectionTechnologies.com

The cooling output depends on the ambi-

ent temperature, on the temperature of

the return-ﬂow cooling water, and also on

the ﬂow rate.

In practice, the cooling capacity of the

WL 3001 at up to 25°C ambient tempera-

ture is sufﬁcient for continuous operation

(100% duty cycle) of X-ray tubehousings

(up to 3000 W).

The water cooling pump WL 3001 con-

sists of the following components:

1 storage tank

1 radial ventilators

1 thermostat

1 protective housing

1 radiators

1 connecting cable, 10 m (32 ft) long

with plug-in connection

1 electro motor and pump unit

Description

Technical Data

Dimensions and Weights

Length 479 mm (18.85 inch)

Width 398 mm (15.67 inch)

Height 481 mm (18.94 inch)

Weight Approximately 38.2 kg (62.05 lbs) without water

Tank capacity Approximately 3.7 l

Output Data

Cooling output see power diagram

Circulation rate 6.0 l/min at 6.0 bar

Mains voltage 230 V +/- 10%, 50/60 Hz

Power input 2.5 A

Noise level 55 dB (A) at 50 Hz, measured at a 1 m distance

56 dB (A) at 60 Hz, measured at a 1 m distance

Environmental Conditions

Operating temperature range +5°C … +40°C

Storage temperature range -25°C … +70°C

(storage without water)

Relative air humidity range 20% … 80%

Settings

Maximum pressure 8.0 bar

Water temperature 35°C maximum

Difference between water

temperature and ambient

temberature [°C]

Cooling power [W]

GE Modules Quick start guide

GE Modules Quick start guide

GE Modules Quick start guide

Related papers

Other documents