Oypla 4032 Owner's manual

User Manual

USER MANUAL Model No: 4032

4 Tier 7 Tray Cantilever

Tool Box

 Distribute the tools evenly inside the tool box according to weight to avoid the box tipping to one side

when picked up or placed down.

 Test the weight of the tool box before lifting to avoid injury.

 Only lift the tool box with both the handles pulled together.

 Do not exceed the maximum load capacity.

 Do not discard any of the packaging until you have checked that you have all parts and fittings required.

 This product is not a toy, and is only to be used for its designated purpose.

 Do not carry out alterations or modifications to this product.

 Keep fingers, loose clothing and hair away whilst folding the product.

 Leaving this product exposed to weather, especially direct sun light, rain and salt air, will speed the

weathering process. This can be slowed by removing the product from these conditions or covering it

with a suitable cover.

 If this product is damaged or has any defects, please contact [email protected]m.

Safety Instructions

Notice: Ensure you read and fully understand instructions before use

While every attempt is made to ensure the highest degree of protection in all equipment, we cannot

guarantee freedom from injury. The user assumes all risk of injury due to use. All merchandise is sold

on this condition, which no representative of the company can waive or change.

DO NOT EXCEED THE MAXIMUM LOAD CAPACITY OF 25KG.