Prem-i-air PCH0501 User manual

Brand: Prem-i-air

Model: PCH0501

Type: User manual

J. SERVICE & WARRANTY

Do not operate the unit with a damaged cord or plug, after the unit malfunctions,

or has been dropped or damaged. Return the product to an authorised service

facility for examination and repair to avoid a hazard.

For your convenience record the complete model number and product name

(located on the Product Identification Plate), the date you purchased the

product and your purchase receipt as proof of purchase.

To ensure your product is covered by warranty, the complete faulty product

together with your purchase receipt should be returned to your retailer.

This product has been manufactured to comply with EEC Directives

2006/95/EG and 89/336/EEC.

Waste electrical products should not be disposed of with household waste.

Please recycle where facilities exist. Check with your Local Authority or retailer

for recycling advice.

EHS, Manchester, M17 1RN

EHS 08/07

CERAMIC HEATER

MODEL: PCH0501

PLEASE READ ALL INSTRUCTIONS

CAREFULLY BEFORE USING THE PRODUCT

ONE (1) YEAR LIMITED WARRANTY

Save This Warranty Information

EHS (International) Ltd. Guarantees this product free from defects in

materials and workmanship for a period of one (1) year.

Should this unit be operated under conditions other than those

recommended, at voltages other than the voltage indicated on the unit, or

any attempts made to service or modify the unit, will render this

WARRANTY VOID. The product you buy may sometimes differ slightly

from illustration. This warranty is in addition to, and does not affect, your

statutory rights

Should you have a problem with this product, please call our Help Desk on:

(0870) 742 5021.

A. IMPORTANT SAFETY INSTRUCTIONS

WARNING - This appliance is intended for use in a domestic environment only.

Any other use is not recommended by the manufacturer and may cause fire,

electrical shocks or other injury to person or property.

When using electrical appliances, basic safety precautions should always be

followed:

1. This heater is hot when in use. To avoid burns DO NOT touch the air

outlet grilles during use. Use the built-in handle when moving this heater.

2. DO NOT direct the heater towards curtains furniture or other flammable

objects and ensure that they are at least 3 feet (0.9m) from the front and 1

foot (0.3m) away from the sides and rear.

3. Extreme care should be taken when any heater is used by, or near

children, and whenever the heater is left operating and unattended.

4. Before operating the heater remove the unit from its packaging and check

it is in good condition.

5. DO NOT let children play with the packaging, for example plastic bags.

6. DO NOT operate any heater with a damaged cord or plug, or after the

heater malfunctions, has been dropped, or damaged in any manner.

Return the heater to an authorised service facility for examination and

repair.

7. DO NOT attempt to repair or adjust any electrical or mechanical functions

on this unit as this may void warranty.

8. Check the household voltage to ensure it matches the appliance's rated

specification

9. DO NOT sit the heater on soft surfaces, like a bed, where openings may

become blocked. DO NOT cover.

10. Always unplug the heater when not in use. To disconnect from the power

supply, grip the plug and pull from the power socket. Never pull by the

cord.

11. Do not use this heater in conjunction with a timer device or any other

device which facilitates unattended switch on.

12. This heater is not intended for use in wet or damp locations. Never locate

the heater where it may fall into a bathtub or other water container. DO

NOT use in bathrooms or outdoors. When not in use always store in a dry

area.

13. Do not leave the appliance unattended when switched on for extended

periods.

14. DO NOT run power cord under carpeting, or cover with rugs or runners.

Arrange the cord away from areas where it may be tripped over.

15. Avoid the use of an extension cable as this may overheat and cause a fire.

16. Always switch off and disconnect from the mains before attempting to

move the heater.

17. DO NOT insert or allow objects to enter any ventilation or exhaust opening

as this may damage the heater and could cause an electrical shock or fire.

18. This appliance is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision or

instruction concerning use of the appliance by a person responsible for

their safety.

19. Children should be supervised to ensure that they do not play with the

appliance.

20. DO NOT use the heater in areas where petrol paint, or other flammable

goods and objects are stored.

READ & SAVE THESE INSTRUCTIONS

B. BS PLUG WIRING

Wiring Instructions: Should it be necessary to change the plug please note the

wires in the mains lead are coloured in accordance with the following code:

BLUE - NEUTRAL

BROWN - LIVE

As the colours of the wires in the mains lead of this appliance may not

correspond with the coloured markings identifying the terminals in your plug,

proceed as follows:

1. The BLUE wire is the NEUTRAL and must be connected to the terminal

which is marked with the letter N or coloured BLACK.

2. The BROWN wire is the LIVE and must be connected to the terminal,

which is marked with the letter L or coloured RED.

3. NEITHER WIRE must be connected to the terminal which is marked with

the letter E, the symbol , coloured GREEN OR GREEN/YELLOW.

4. Always ensure that the cord grip is positioned and fastened correctly.

If a 13A (BS 1363) fused plug is used it must be fitted with a 13A (BS 1362)

fuse. If in doubt consult a qualified electrician.

Wiring for a 13 Amp Plug (BS 1363)

Please note. The Earth Terminal is

marked with the letter E or Earth

Symbol.

C. PARTS DESCRIPTION

A Air inlet grille

B Air outlet grille

C Control switch

D Thermostat switch

E Power on indicator light

F Tip-over switch (on bottom)

D. OPERATING INTRUCTIONS

Check the household voltage to ensure it matches the appliance's rated

specification.

The control switch (C) and the thermostat knob (D) enable you to select the

following functions:

Selector switch(C) :

{ = “OFF”. Both the fan and the two heating elements are

switched off.

= “Cool air”. Only the fan is switched on.

I = “Warm air” for gradual heat-up. Low power position: the fan

and one of the heating elements is switched on.

II = “Hot air” for quick heat-up. High power: the fan

and both heating elements are switched on.

Thermostat knob (D): With the thermostat switch you can set a constant room

temperature. When the selector switch is set to position I or position II the

heater will automatically switch on as soon as the room temperature falls below

the set temperature.

As soon as the set temperature is reached, they will switch off.

Rotate the knob clockwise to obtain a higher temperature setting or anti-

clockwise for a lower temperature setting. You may adjust the thermostat

during use.

To find the ideal thermostat setting:

- First set the switch to maximum position. (rotate clockwise until the knob

stops.)

- As soon as the temperature is comfortable, turn the knob anti-clockwise

slowly until the heater goes off.

Power on indicator light (E)

• The power on light (E) indicates that the heater is switched on and

operating in one of the following settings ( , I or II). When the heater

switches off after reaching the set temperature, the light goes out.

E. SAFETY FEATURES

1. A thermal overload protector is built in to prevent overheating.

2. When an overheat temperature is reached, the unit will be automatically

shut off. Remove the mains plug from the socket. See RESET

INSTRUCTIONS below to reset your heater.

F. RESET INSTRUCTIONS

1. Unplug the heater then turn your Fan Heater "OFF" and wait 10 minutes for

the unit to cool down.

2. Check that there are no objects around the unit, which may have caused it

to overheat.

3. After 10 minutes, plug the unit in again and operate normally.

4. If the unit overheats again, unplug and return to your retailer or a qualified

service engineer for inspection and repair.

TIPOVER SWITCH: YOUR HEATER HAS A SAFTEY TIPOVER

SWITCH (F) AND IF KNOCKED OVER THE HEATER WILL

STOP OPERATING, UNTIL IT IS PLACED IN THE UPTIGHT

POSITION.

G. MAINTENANCE

WARNING: ALWAYS UNPLUG THE CORD FROM THE POWER OUTLET

BEFORE CLEANING. DO NOT IMMERSE HEATER IN WATER.

Clean the heater body with a soft cloth only.

CAUTION: Do not use Petrol, thinner, harsh cleaners, etc., as they will

damage the heater. NEVER USE ALCOHOL OR SOLVENTS.

Please note

Do not attempt to take heater apart. This will void your warranty.

H. STORAGE

Store the heater with these instructions in the original carton in a cool, dry

place.

I. SPECIFICATION

Power: 1.8kW

Voltage: 220-240V ~ 50Hz

N.W. 1.4kg

G.W. 1.9kg

Prem-i-air PCH0501 User manual

Prem-i-air PCH0501 User manual

Prem-i-air PCH0501 User manual

Related papers

Other documents