2. ROOMS TO GO
  3. 33740297

ROOMS TO GO 33740297, 33730296, 33750298, 33760299, 33760491 Assembly Instructions

  • Hello! I've reviewed the assembly instruction for the Headboard models SH200TBGE-1, SH200TBLU-1, SH200TGRY-1, SH200TDGR-1 and SH200TPNK-1. This document provides a detailed guide on how to assemble your headboard, including attaching the legs and bed rails using various bolts, washers, nuts, and Allen keys. The document also includes a detailed parts list and highlights steps to avoid over tightening bolts during assembly. I'm ready to answer any questions you have about the assembly process or device details.
  • What is the first step in the assembly?
    What tool is used to attach the Headboard Legs?
    Should the bolts be fully tightened during the first step?
    What is used to attach bed rails to headboard?
Headboard
Leg
Bolts
M8 x 50mm
Lock Washer
(for M8)
Flat Washer
(for M8)
Bolts
M6 x 50mm
Lock Washer
(for M6)
Allen Key
M4 x 65mm
Allen Key
M5 x 65mm
Hex NutFlat Washer
(for M6)
x4 x4 x4 x4
x1x4x8 x1
ASSEMBLY INSTRUCTION
SH200TBGE-1 & SH200TBLU-1 & SH200TGRY-1 &
SH200TDGR-1 & SH200TPNK-1
1 2
A B C D E
I
H
G
F
x2
x4
ASSEMBLY INSTRUCTION
SH200TBGE-1 & SH200TBLU-1 & SH200TGRY-1 &
SH200TDGR-1 & SH200TPNK-1
Begin assembly by attaching each Headboard Leg (2) to the bottom of the Headboard (1) by aligning
the hole and securing with 2 Allen Bolts (A) , 2 Lock Washer (B) , 3 Flat Washer (C) per leg using
Allen Key (I) .
(DO NOT FULLY TIGHTEN BOLTS FOR THIS STEP)
F
E
G
F
D
H
1
A
B
C
I
Attached Bed Rails (not included) to left and right Headboard Legs (2) using 2 Allen bolts (D) and 2 Flat
Washer (F) from the back and 2 Flat Washer (F), 2 Lock Washer (E) and 2 Hex Nuts (G) from the
front. Tighten all bolts with Allen Key (H) provided.
/