2. Winners Only
  3. GC268F

Winners Only GC268F Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the GC268F desk. This document provides a detailed step-by-step guide on how to assemble the desk, including information on the required hardware, connecting the pedestals, back panel, cross bar, and desk top, as well as installing the keyboard pullout. I'm ready to answer any questions you might have about assembling your new desk.
  • How many people are needed for assembly?
    What kind of screws are used to attach the cross bar to the pedestals?
    What is the purpose of metal figure 8?
3. Insert two Wood Dowels (4 PCS) in each Pedestal (A) (B).
4. Loosen the screw to adjust Metal figure8 (14 PCS) of its direction of the panel and
re-screw.
5. Insert Short (1") Flat Head Wood Screws (14 PCS) through metal figure 8 to
connect Desk Top (E) and pedestals.
ball bearing
retainer
Assembly is now complete.
6. Install the Keyboard Pullout (F) to place .
Important:
(Be sure to move the ball bearing retainer all the way to the front of the glide and carefully
slide the rails into the glides and ball bearing retainer.)
/