2. ROOMS TO GO
  3. 90650132

ROOMS TO GO 90650132 Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the 50140 Hale Ceiling Lamp. This document outlines the steps required to install the lamp and specifies the type of light bulbs it uses. It also emphasizes safety measures. I'm ready to answer any questions you have about the assembly process or the product itself.
  • How many light bulbs does this lamp use?
    What should I do before assembling the lamp?
    What tool I need to assemble lamp?
    What to do when external wire or cable become damaged?
50140, Hale Ceiling Lamp
Assembly Instructions:
1. Before assembling,turn off the main power source.
2. Use six (6) G4 Halogen Max.10W light bulbs.
3. To avoid scratches and damages, do not use hard or sharp tools to assemble the lamp.
4. For their safety, keep children away from the electric parts of this lamp.
If the external wire or cable becomes damaged, only the manufacturer, service agent or qualified individual should make the repairs in order to avoid
hazard.
Instructions d’Assemblage:
1. Avant l’assemblage, couper la source d’alimentation du courant électrique.
2. Utiliser six ampoules (6) G4, Halogène, Max 10W.
3. Pour éviter de faire des égratignures et dommages, ne pas se servir d’outils durs ou pointus pour l’assemblage de cette lampe.
4. Pour leur protection, tenir les enfants loin des conduits électriques.
Si un fil ou cable extérieur se brise, faire réparer seulement par le fabricant, son agent ou une personne qualifiée afin d’éviter tout danger.
/