Zetronix.Com Manual zBlackBox-HDi
Operation
Instructions
Turn on / off and auto off of video recorder
• Press the “Power” button momentarily to turn on. Press the “Power” button for 2 seconds to turn the camera off.
• To save battery, set the “AUTO POWER OFF” to 1, 2, 3, 5, OFF. The camera will automatically turn off after 1, 2, 3,
5 minutes, if the camera is not in use.
Video Recording Mode:
• Press “REC/OK” button to start video recording. Press “REC/OK” button to stop video recording. During recording,
a red icon will appear on the screen.
Menu:
• Resolution: Options of 2304X1296/F30 1920x1080/F30 1280x720/F30
• Record Overwrite: to set or shut the circulating video recording, in the status of circulating video
recording, when the capacity of MicroSD card is full, the previous content shall be covered automatically (File Size can
be Set to 5 MIN, 1 MIN, OFF. OFF will stop recording when memory card is full.
• Motion Detection: ON/OFF (This feature is best to be used when the car is parked for vandalism suspicions) Note
battery will only last 2 – 3 hours MAX in Motion Detection Mode. For constant power we recommend using a
Zetronix Hard Wire Kit.
• Power On Record: ON / OFF (This option allows the dash cam to automatically turn on when the car is turned on or
when the unit receives power, we recommending leaving this feature ON.
• Power Off Delay: When connected to the car charger, select “Power Off Delay”, The delay stop time can be set to 10,
20, 30 seconds, and OFF (This selects the time the camera will still be on after you shut your car off or turned off the
power to the camera)
• Power On Delay: When connected to the car charger, select “Power On Delay”, the delay start time can be set to
10, 20, 30 seconds, and OFF (This selects the time the camera will wait when you turn the power on in your car or give
the dash cam power) We recommend leaving this setting OFF.
• Car Number Set: If you are using multiple cameras with multiple cars you can give each camera or car a name so
when you play back the video you can see which camera it came from. Press UP/DOWN to select the character you
want to display and press the REC / OK button to go to the next character.
• Mic: ON / OFF (This allows you to turn the Microphone ON or OFF.
• Language: Select desired
• TV Type: NTSC / PAL (Please select NTSC if you are in US, and PAL for Europe)
• Auto Power Off: 3, 5 minutes, and OFF (Change the time you want to camera to automatically shut off if it is not
recording.
• Format: Format the Micro SD card, this ERASES all the files from the card.
• Auto LCD Off: Set the time to turn off the LCD screen automatically; 30 sec, 60 sec, 3 minutes, and “NO”. Press any key
to wake up the LCD screen
• Default Setting: Sets the system default values
• Time Setup: Set up the time & date to display in the video. Format (YEAR . MONTH . DATE . HOUR . MINUTE . SECOND)
Use “Up/Down” buttons to change the digits and press “OK” to move to next field.
• Stamp: Automatically stamps videos with date and time/ Logo/ Speed / GPS / Number. DATE/TIME has everything
stamped.
• Flicker: Choose the frequency of electricity. In the event of selecting the wrong frequency, horizontal lines or
interference may show on the image
• G_Sensor Set: Select this feature to lock the files recorded if the camera is experiencing high rate gravity forces such
as sudden breaking, roll over or car accident. You can select OFF/1/2/3/4/5/6/7 as sensitivity for the sensor. The files
with high G-Force rate will have a next to them and will not be overwritten when the memory card is full. We
recommend setting this sensor to 1G, which is the lowest setting to prevent too many locked files, which will affect
loop recording.
• GPS Auto Update Time: On/ Off. This allows the GPS to automatically correct the time in according the GPS location.
Please MAKE SURE the GMT setting in the next menu are correct or the time will not be displayed correctly.
• GMT Setup: Select the Correct Time Zone in your area. To find out your time zone go to
http://wwp.greenwichmeantime.com/time-zone/usa/time-zones/
• GPS Setup: On, Off. Turn on or off the GPS sensor to show your position on Google Maps on playback.
• WDR: Wide Dynamic Range turn this feature on to dramatically increase night vision and quality of the video during
the night and day.
• Time Laps: 1 Sec, 5 Sec, 30 Sec, OFF This allows you to record time-lapse video that would record 1 frame per the
time that’s selected. This will not work in the highest 2304X1296 resolution.
• LDWS Detect: YES, NO. Lane departure warning system, when activated the dash cam will warn the driver with a
loud sound when the vehicle begins to move out of its lane.
• Version: Check the cameras software version