Trolley for interactive whiteboard
The most interactive whiteboards are sold
with fixed wallmounting brackets, but the
real benefits of a interactive whiteboard can
only be enjoyed if you can adopt the
optimum viewing position (eye height).
The ErgoFrame M1 is easy
height adjustable
with the use of gas springs and is easy
transportable because of the robust
trolley
.
The real benefit of the ErgoFrame M1 is that
a Super Close Projection Beamer can be
mounted on the frame. Because of this, the
system is optimal mobile. The system does
not need to be calibrated and installed after
every transportation.
The ErgoFrame M1 can be used with the 3M
Digital Media System 800/801 and SMART
Unifi Beamer.
The ErgoFrame M1 offers a complete solution for the most accepted interactive systems
currently available on the market. The
ErgoFrame fits
the following whiteboards..
SmartBoard
Activeboard
Focus Board
I-Board
Communicator
Penboard
ErgoFrame can be build-up from the following components and can be added to
the ErgoFrame M1
ERGOXS BV
PO-Box 24, 9356 ZG Tolbert NL
Feitspark 5, 9356 BX Tolbert NL
T +31 (0)594-554005
F +31 (0)594-554040
E info@ergoxs.com
W ergoxs.com
M1 ErgoFrame Standard trolley
M2 ErgoFrame Swivel Beamer-swivel-System
M3 ErgoFrame Cover Beamer protection cage
M4
ErgoFrame Cover Security Beamer anti-theft protection cage
M5 ErgoFrame CPU Cabinet Lockable CPU Cabinet / Notebook Cabinet
M6 ErgoFrame CPU Holder CPU Holder
Max. bord afmeting Hoogte instelbaar Minimal bordhoogte
218 x 128cm ± 50cm
Onderrand ± 44cm
Bovenrand ± 168cm
Max. board
messurment
Height
adjusting
Minimum
Board height
Maximum
board height
Lowest stance
incl. beamer
Highest stance
incl. beamer
218 x 128cm ± 50cm
under border ± 44cm
upper border ± 168cm
Under border ± 94cm
Upper border ± 217cm 210cm 251cm
/
