Page is loading ...
6in 4 Pin to 8 Pin EPS Power Adapter with LP4 - F/M
StarTech ID: EPS48ADAP
This reliable EPS adapter combines a P4 power supply connection with an LP4 power supply connection, into a
single 8-pin EPS motherboard connector, allowing you to use a non-EPS power supply with a motherboard that
requires an EPS power connection.
The LP4 + P4 PSU to EPS adapter is backed by StarTech.com's Lifetime Warranty.
Applications
Converts standard P4 and LP4 power supply connection into an 8 pin EPS motherboard connector
Use a non-EPS power supply with a motherboard that requires an EPS power connection
Features
Provides 6 inch cable length reduces cable clutter in the case
Easy to use and install
www.startech.com
1 800 265 1844
Technical Specifications
Warranty Lifetime
Connector A 1 - ATX 12V P4 Power (4 pin; v 2.x) Female
Connector A 1 - LP4 (4 pin; Molex Large Drive Power) Male
Connector B 1 - ATX 12V EPS Power (8 pin) Male
Cable Length 6 in [152 mm]
Shipping (Package) Weight 0.1 lb [0 kg]
Included in Package 1 - 6in 4 Pin to 8 Pin EPS Power Adapter with LP4 - F/M
Certifications, Reports and Compatibility
www.startech.com
1 800 265 1844
/
