Watlow SERIES 922 User manual

Type
User manual

This manual is also suitable for

Watlow SERIES 922 Data Communications enables you to connect your Series 922 to any computer with an RS-422A or RS-423A (RS-232C compatible) serial interface.

With the RS-422A interface, you can run a multiple device network with up to ten devices total and a network length limit of 4000'.

With the RS-423A interface (RS-232C compatible), you can run a one-on-one communication on a 50' network with a 922 and a host computer.

You can also choose between two software protocols:

  1. ANSI X3.28 Protocol, based on ANSI X3.28 - 1976 Subcategories 2.2, and A3, which provides a response to every message.

Watlow SERIES 922 Data Communications enables you to connect your Series 922 to any computer with an RS-422A or RS-423A (RS-232C compatible) serial interface.

With the RS-422A interface, you can run a multiple device network with up to ten devices total and a network length limit of 4000'.

With the RS-423A interface (RS-232C compatible), you can run a one-on-one communication on a 50' network with a 922 and a host computer.

You can also choose between two software protocols:

  1. ANSI X3.28 Protocol, based on ANSI X3.28 - 1976 Subcategories 2.2, and A3, which provides a response to every message.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27

Watlow SERIES 922 User manual

Type
User manual
This manual is also suitable for

Watlow SERIES 922 Data Communications enables you to connect your Series 922 to any computer with an RS-422A or RS-423A (RS-232C compatible) serial interface.

With the RS-422A interface, you can run a multiple device network with up to ten devices total and a network length limit of 4000'.

With the RS-423A interface (RS-232C compatible), you can run a one-on-one communication on a 50' network with a 922 and a host computer.

You can also choose between two software protocols:

  1. ANSI X3.28 Protocol, based on ANSI X3.28 - 1976 Subcategories 2.2, and A3, which provides a response to every message.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI