INSTALLATION GUIDE
-
Place refrigerator on the base stand, such
that to insure the proper placement of
refrigerator on base stand as indicated
(fig. 2).
-
Adjust the refrigerator so that the gap on
either sides is even.
-
Plug in the power supply.
-
Do not move refrigerator with base stand
it might damage the stand
-
-
-
-
ao{\«$OaoQ>a _w»` {S>ã~o go {S>ã~o H$mo ~og ñQ>¡ÊS> ~mha {ZH$mb|
~og ñQ>¡ÊS> H$mo Cg ñWmZ na aI| Ohm§ Amn ao{\«$OaoQ>a
aIZm MmhVo h¢
~og ñQ>¡ÊS> Ho$ n¡am| H$mo R>rH$ àH$ma O_rZ na {Q>H$mE§
-
ao{\«$OaoQ>a H$mo Bg àH$ma aI| {H$ XmoZm| Va\$ ~am~a A§Va hmo
-
nmda gßbmB© _| ßbJ bJmE§
-
ao{\«$OaoQ>a H$mo ~og ñQ>¡ÊS> Ho$ gmW Z {hbmE§, Eogm H$aZo na
~og ñQ>¡ÊS> H$mo ZwH$gmZ nhþ§M gH$Vm h¡
-
-
A~ ao{\«$OaoQ>a H$mo {MÌ _| {XIm`r JB© pñW{V Ho$ AZwgma
~og ñQ>¡ÊS> Ho$ D$na aI|
CAUTION : Ensure that the refrigerator is unplugged from the power source, before installation.
gmdYmZr : ao{\«$OaoQ>a H$mo ñWm{nV H$aZo go nhbo `h Adí` gw{Z{íMV H$a b| {H$ BgH$mßbJ nmda gßbmB© go hQ>m hmo &
When Refrigerator is used without base
ensure both the legs of refrigerator are
in place and properly leveled.
O~ H$^r ao{\«$OaoQ>a H$mo {~Zm ñQ>¡ÊS> Ho$ BñVo_mb _| bmE§
Vmo R>rH$ gw{Z{íMV H$a| {H ao{\«$OaoQ>a Ho$ XmoZm| n¡a
àH$ma go O_rZ na {Q>Ho$ hmo
- Take base stand box out of refrigerator main
box.
- Open the base stand box and take the base
stand out.
- Place the base stand at appropriate location,
you intend to install Refrigerator.
- Adjust legs of base stand to level it perfectly
on Floor.
-
~og ñQ>¡ÊS> ~mha {ZH$mb|{S>ã~o H$mo Imobo Am¡a ~og ñQ>¡ÊS> H$mo