Project __________________________________
Item ____________________________________
Quantity ________________________________
CSI Section 11400
Approved _______________________________
Date ____________________________________
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
www.delfield.com
Top: Top is constructed of one-piece 20-gauge
stainless steel.
Interior: Interior liner is constructed of 16-
gauge stainless steel with a 1” (2.54cm) drain.
Adjustable stainless steel pan rest for flush
mount heating or 2” recessed cooling to
accommodate up to 6” (15.2cm) deep 12”x20”
pans, supplied by others. Stainless steel
immersion heater(s) installed in bottom for
wet only heating operation.
Exterior: Exterior body is constructed of 24-
gauge galvanized steel with high density
environmentally friendly, Kyoto Protocol
compliant, Non ODP (Ozone Depletion
Potential), Non GWP (Global Warming Potential)
polyurethane insulation throughout.
Refrigeration: Condensing unit is suspended
on a 16-gauge galvanized steel frame.
Environmentally friendly HFC-404A refrigerant
is utilized. Temperature controlled by
thermostat located next to condensing unit.
Operation: Remote control panel contains 3-
way Hot/Cold/Off power switch and thermostat
for heated operation.
Electrical: All units must be hard wired at
installation.
Specifications
Standard Features
Options &
Accessories
NSF-4 and NSF-7 certified for hot and
cold operation
Stainless steel immersion heaters with
stainless steel perforated covers
Remote control panel with 3-way hot/
cold/off power switch and thermostat
for hot operation
Thermostat for cold operation located
next to condensing unit
Adjustable pan support for flush
mounted hot operation or 2” recessed
cold operation
1’’ stainless steel drain with screen
Stainless steel louver provided
High density environmentally friendly,
Kyoto Protocol compliant, Non ODP
(Ozone Depletion Potential), Non
GWP (Global Warming Potential)
polyurethane foam throughout
Push-in flange gasket is standard
Adaptor bars for 12”x20” pans provided
Environmentally friendly HFC-404A
refrigerant
Standard 90 day labor and one year
parts warranty
•
•
•
•
•
•
•
•
•
•
•
•
N8630 30” hot & cold combination pan drop-in
N8643 43” hot & cold combination pan drop-in
N8656 56” hot & cold combination pan drop-in
N8669 69” hot & cold combination pan drop-in
N8681 81” hot & cold combination pan drop-in
•
•
•
•
•
Models
N8600
Drop-In Self-Contained Hot & Cold Combination Pan
N8600 Drop-In Self-Contained Hot & Cold Combination Pan
Additional adaptor bars
or plates
Relocate compressor
Remote refrigeration
Automatic water fill
220V/50C electrical
3-phase electrical
Counter protectors
Extended warranty
•
•
•
•
•
•
•
•
N8630
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
www.delfield.com
N8600
Drop-In Self-Contained Hot & Cold Combination Pan
Printed in the U.S.A.
DSN8600
08/09
Plan View
Side Elevation
N8630
N8643
N8656
N8669
N8681
End Elevation All Models
12.56
13.19
25.75
24.65
24.00
Plan View
Side Elevation
Model Cutout Dimensions Volts/Hertz/Phase Amps H.P. Ship Weight
N8630 29.75” X 25”, (75.6cmX63.5cm) 120/60/1 24.0 1/4 164lbs/74.5kg
N8643 42.50” X 25”, (107.9cmX63.5cm) 120-240/60/1 21.0 1/4 198lbs/90kg
N8656 55.25” X 25”, (140.3cmX63.5cm) 120-240/60/1 21.0 1/4 233lbs/105.9kg
N8669 68” X 25”, (172.7cmX63.5cm) 120-240/60/1 42.0 1/4 266lbs/120.9kg
N8681 80.75” X 25”, (205.1cmX63.5cm) 120-240/60/1 42.0 1/3 301lbs/136.8kg
Deleld reserves the right to make changes to the design or specications without prior notice.
30.75”
78.11cm
26.00”
66.04cm
29.51”
74.96cm
43.50”
110.49cm
26.00”
66.04cm
26.00”
66.04cm
26.00”
66.04cm
26.00”
66.04cm
25.75”
65.41cm
24.65”
62.61cm
24.00”
60.96cm
13.19”
33.50cm
12.56”
31.90cm
67.76”
172.11cm
42.26”
107.34cm
56.25”
142.88cm
55.01”
139.73cm
80.51”
204.50cm
81.75”
207.65cm
69.00”
175.26cm
Remote Control Detail
Cutout Dimensions
12.25”x4.25”x7.00”
(31.1cm x 10.8cm x 17.8cm)
-
1
-
2
Delfield N8669 Datasheet
- Type
- Datasheet
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Delfield ESIC36 Datasheet
-
-
Delfield N8800 User manual
-
Delfield 8100-EF User manual
-
-
Delfield N8018 Specification
-
-
Delfield 8159-EF Datasheet
-
-