CURT 13296 Installation guide

CURT
Brand
CURT
Model
13296
Type
Installation guide

CURT 13296 is a weight-carrying and weight-distributing hitch designed for use with Chrysler Aspen and Dodge Durango vehicles. It offers a gross load capacity of 6,000 lbs. when used as a weight-carrying hitch with a maximum tongue weight of 600 lbs. When used as a weight-distributing hitch, the gross load capacity increases to 10,000 lbs. with a maximum tongue weight of 1,000 lbs. The hitch is easy to install with no drilling required and comes with all necessary hardware for a quick and secure installation. The CURT 13296 is perfect for towing trailers, boats, campers, and other heavy loads.

CURT 13296 is a weight-carrying and weight-distributing hitch designed for use with Chrysler Aspen and Dodge Durango vehicles. It offers a gross load capacity of 6,000 lbs. when used as a weight-carrying hitch with a maximum tongue weight of 600 lbs. When used as a weight-distributing hitch, the gross load capacity increases to 10,000 lbs. with a maximum tongue weight of 1,000 lbs. The hitch is easy to install with no drilling required and comes with all necessary hardware for a quick and secure installation. The CURT 13296 is perfect for towing trailers, boats, campers, and other heavy loads.

Parts List
DESCRIPTION
PART NUMBER
QTY
ITEM
.500 x 1.25 x 2.50" ROUND HOLE SPACERCM-SP5261
HEX FLANGE NUTHFN 121342
HEX BOLT1_2 - 13 x 5 HEX
4
3
FW, 12, ZPFW1244
GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH: LBS. TRAILER WEIGHT & LBS. TONGUE WEIGHT.
GROSS LOAD CAPACITY WHEN USED AS A WEIGHT DISTRIBUTION HITCH: LBS. TRAILER WEIGHT & LBS. TONGUE WEIGHT.
***DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY.***
HITCH WEIGHT: LBS.
INSTALL TIME:
MINUTES
INSTALL NOTES:
INSTALLATION STEPS
PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE THAT ALL FASTENERS
ARE TIGHT AND THAT ALL STRUCTURAL COMPONENTS ARE SOUND.
Curt Manufacturing Inc., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,
Curt Manufacturing Inc., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of
this product voids the warranty. Curt Manufacturing Inc.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or
consequential loss or damage.
40
30
CHRYSLER ASPEN / DODGE DURANGO
4/9/2008
13296
600
1,000
6,000
10,000
1) Remove three bumper bracket nuts each side. Remove two rear most bolts each side.
2) Install supplied 1/2" bolts where factory bolts were removed. Push all bolts through frame until 1/2"
protrudes through frame over bumper bracket lip. Position 1/2" thick spacers over bolts.
3) Raise hitch into position over tail pipe. Attach with existing forward most bolts and fasten with existing nuts.
Fasten remaining bolts with 1/2" flange nuts.
4) Torque all 1/2" fasteners to 75 lb.-ft. Torque all M14 fasteners to 140 lb.-ft.
- NO DRILLING REQUIRED
TOOLS REQUIRED
RATCHET
21mm DEEP SOCKET
3/4 DEEP SOCKET
TORQUE WRENCH
EXISTING FASTENERS
PASSENGER SIDE FRAME RAIL
1
2
EXISTING FASTENER
(TYP)
3
4
BUMPER BRACKET LIP
DRIVER SIDE FRAME RAIL
MUFFLER
ASSEMBLED VIEW
DRIVER SIDE
  • Page 1 1

CURT 13296 Installation guide

CURT
Brand
CURT
Model
13296
Type
Installation guide

CURT 13296 is a weight-carrying and weight-distributing hitch designed for use with Chrysler Aspen and Dodge Durango vehicles. It offers a gross load capacity of 6,000 lbs. when used as a weight-carrying hitch with a maximum tongue weight of 600 lbs. When used as a weight-distributing hitch, the gross load capacity increases to 10,000 lbs. with a maximum tongue weight of 1,000 lbs. The hitch is easy to install with no drilling required and comes with all necessary hardware for a quick and secure installation. The CURT 13296 is perfect for towing trailers, boats, campers, and other heavy loads.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers