Sytech SYBS523 Owner's manual

Type
Owner's manual
23
Electronic digital glass scale with BMI calculator
Model: SY-BS523
1 2
It is advisable to weigh yourself at the same time everyday.
conditions.
The body fat/hydration measured from different types of people will vary:
fields
The scale can become slippery when weighing on a wet surface. If the
weighing scale platform is glazed, do not step on the edge of the scale,
however do maintain your balance during weighing.
Specifications.
Electronic digital glass scale
Ultra slim design
1,0" LCD display
6mm tempered glass platform
Two types of measuring units : kg/lbs
Auto On/Off function
Low battery and overload indicator
Maximum capacity : 150 kg/330lbs
Graduation : 100g / 0.2 lbs.
Power source : 1x 3V cell battery (CR2032 included)
Thank you for purchasing the new electronic digital glass scale with BMI indicator
SY-BS523. This product is specially designed to test body fat/hydration/muscle
which will help you to keep a close control of your body on a daily basis. Please
read this instructions manual carefully and store in a safe place for future reference.
3 4
battery contact and
you can set the measuring unit
to the one desired by pressing the unit
conversion button. Press the unit conversion
button when the unit is turned off. The LCD
will show the current weight unit. Press the
button again to convert the weight unit.
will automatically turn off after 3 seconds.
is
and move to next parameter
Increase the values by one interval upon each
press. Continuous pressing will speed up the
increasing of the value.
Decrease the values by one interval upon each
press. Continuous pressing will speed up the
decreasing of the value.
Battery installation
5 6
Once the digits have stabilized, additional weight loadings can be done.
However, ensure that the extra loading is more than 2kgs in order to get
a new reading.
For example: if you want to get the weight of your baby, you can weigh
yourself first, and then hold your baby together, without stepping off the
scale. You will then get the total weight reading. Subtract the previous
reading from the new reading, and that difference will be your baby's weight.
The first time you insert batteries into the unit and switch the
unit on, all default parameters are set as shown below:
9 10
to wipe and clean
The use of chemicals or corrosive detergents is not acceptable
or any other irritative substance, please clean it immediately.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Sytech SYBS523 Owner's manual

Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI