Strong SR-EHR2-CASTERBASE Owner's manual

Strong
Brand
Strong
Model
SR-EHR2-CASTERBASE
Category
Rack accessories
Type
Owner's manual
Product Data Sheet
© 2015 Strong
TM
Evolve™ Hybrid Rack System 2.0
Base with Casters
SR-EHR2-CASTERBASE
Package Contents
A Caster base
B 4x Bolts
C 4x Washers
Installation
1. Remove any equipment from the rack before in-
stalling the caster base.
2. Remove the plastic EZ glide runners from the bot-
tom of the rack.
3. Remove the knockouts from the four caster base
mounting holes in the bottom of the rack.
4. Use the included bolts and washers to fasten the
rack to the base as illustrated. Hand-tighten the
bolts using a Phillips screwdriver.
5. Installation is complete. Reinstall equipment in the
rack.
Lifetime Limited Warranty
All Strong
TM
products have a Lifetime Limited Waranty. This warranty includes parts and labor repairs on all components found to
be defective in material or workmanship under normal conditions of use. This warranty shall not apply to products that have been
abused, modied, or disassembled. Products to be repaired under this warranty must be returned to SnapAV or a designated
service center with prior notication and an assigned return authorization number (RA).
For Technical Support: 1.866.838.5052
Lifetime
2
year
Product Construction A - Width B - Depth C - Height Max Load Capacity
SR-EHR2-CASTERBASE Steel with Deep Black Powder Coat 22” 18.75” 4.25” 400lbs
A
B
C
x4
Key Features
• Fine oor casters
• 400lbs max load
Rev: 151203-1130
  • Page 1 1

Strong SR-EHR2-CASTERBASE Owner's manual

Strong
Brand
Strong
Model
SR-EHR2-CASTERBASE
Category
Rack accessories
Type
Owner's manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents