;'.$6亥PP亥J䬌⡸㓨䈤᰾Җঅ㢢$⡸
Features:
-3” CCAR Voice Coil
-Titanium Diaphragm
-Die-cast Aluminum Rear Cover
-76 Oz Magnet structure
-8 ohm Impedance
-1200Watts Max music power
-Sensitivity: 120.5 dB (1w/m)
-Frequency Response: 650Hz-19.5KHz
-45° x 45° Constant Directivity Coverage
-Includes special Adapter Plate for Easy Front Installation
HORN DRIVER
XDK04.2AS
High Quality Horn With Driver System
Applications:
The XDK04.2AS is a high quality compression horn
driver for professional application. It can be
successfully used in arenas, stage monitors, side fills
and sound reinforcement systems where high SPL
and low distortion are of great concern.
Dimensions in mm.
RESPONSE AND IMPEDANCE CURVES, 1W/1M
mH
Specificaions
Throat Diameter
Nominal Impedance
Minimum Impedance
Continuous Musical Power
Continuous Power Handling
Nominal Power Handling(AES)
Sensitivity(1W/1M)
Frequency Range
Recommended Crossover
Voice Coil Diameter
Winding Material
Inductance
Diaphragm material
Flux Density
Magnet Material
Magnet Weight
Coverage Angle (H x V)
Mounting and Shipping info
mm / inch
mm / inch
ohm
ohm
Watt
Watt
Watt
dB
Hz
Hz
T
50 / 2
8
6.5
1200
600
300
120.5
650-19500
900
74.8 / 3
CCAR
0.2
Titanium
1.85
Ceramic
76
45° x 45°
/
/
/
/
Overall Dimension
Depth
Net Weight
Replacement Voice Coil
Replacement Voice Coil
mm
mm / inch
Kg
197 x 197
226.5
6.8
XDK4VCK
74.8 / 3
mm
/
Oz
The XDK04.2AS is a 3.0 inch voice coil compression driver directly
coupled with a 45°×45°constant directivity coverage high
frequency die-cast aluminum horn. The diaphragm is in pure,
rigid, light and extremely thin titanium, offers high efficiency and
low distortion over medium and high frequencies band.
INCLUDES SPECIAL ADAPTER PLATE FOR EASY FRONT INSTALLATION
RESPONSE AND IMPEDANCE CURVES 1W/1M