Siemens SN878D36TE/38 User manual

5HJLVWHU

\RXU

SURGXFW

RQOLQH

VLHPHQVKRPHEVKJURXSFRPZHOFRPH

en Instruction manual

Dishwasher

SN.../SX...

Page is loading ...

en

3

Table of contents

enInstruction manual

8 Intended use . . . . . . . . . . . . . . . 5

( Safety instructions. . . . . . . . . . . . 5

Before you switch ON

the appliance . . . . . . . . . . . . . . . . . . 5

Delivery. . . . . . . . . . . . . . . . . . . . . . . . 5

Installation. . . . . . . . . . . . . . . . . . . . . . 6

In daily use . . . . . . . . . . . . . . . . . . . . . 7

Damage . . . . . . . . . . . . . . . . . . . . . . . 7

Disposal . . . . . . . . . . . . . . . . . . . . . . . 7

Door lock . . . . . . . . . . . . . . . . . . . . . . 8

7 Environmental protection . . . . . 10

Packaging. . . . . . . . . . . . . . . . . . . . . 10

Old appliances . . . . . . . . . . . . . . . . . 10

* Getting to know

your appliance . . . . . . . . . . . . . . 10

Automatic door opening . . . . . . . . . . 10

Control panel . . . . . . . . . . . . . . . . . . 10

Appliance interior . . . . . . . . . . . . . . . 11

Info button . . . . . . . . . . . . . . . . . . . . 11

Time setting . . . . . . . . . . . . . . . . . . . 11

Initial start-up . . . . . . . . . . . . . . . . . . 12

Settings. . . . . . . . . . . . . . . . . . . . . . . 13

o Home Connect . . . . . . . . . . . . . . 15

Info button . . . . . . . . . . . . . . . . . . . . 15

Setting up the App . . . . . . . . . . . . . . 15

Setting up Home Connect . . . . . . . . 16

Wi-Fi . . . . . . . . . . . . . . . . . . . . . . . . . 16

Network login . . . . . . . . . . . . . . . . . . 16

Connect to App . . . . . . . . . . . . . . . . 17

Remote start button . . . . . . . . . . . . . 17

Wi-Fi without a connection

to the Home Connect server. . . . . . . 18

Remote diagnostics . . . . . . . . . . . . . 18

Setting up energy manager . . . . . . . 18

Activating energy manager . . . . . . . 19

Deactivating energy manager . . . . . 19

Declaration of Conformity . . . . . . . . . 19

+ Water softening system /

special salt . . . . . . . . . . . . . . . . . 20

Water hardness table . . . . . . . . . . . . 20

Adjusting the water

softening system . . . . . . . . . . . . . . . . 20

Using special salt . . . . . . . . . . . . . . . 20

Detergent with a salt component. . . . 21

Switching off water

softening system . . . . . . . . . . . . . . . . 21

, Rinse aid. . . . . . . . . . . . . . . . . . . 22

Setting amount of rinse aid . . . . . . . . 22

Switching off

rinse aid refill indicator . . . . . . . . . 23

- Utensils. . . . . . . . . . . . . . . . . . . . 23

Not suitable . . . . . . . . . . . . . . . . . . . . 23

Glass and utensil damage. . . . . . . . . 23

Loading the dishwasher . . . . . . . . . . 24

Upper basket. . . . . . . . . . . . . . . . . . . 24

Lower basket. . . . . . . . . . . . . . . . . . . 24

Cutlery basket . . . . . . . . . . . . . . . . . . 25

Cutlery drawer . . . . . . . . . . . . . . . . . . 25

Etagere . . . . . . . . . . . . . . . . . . . . . . . 26

Folding spikes . . . . . . . . . . . . . . . . . . 26

Small items holder. . . . . . . . . . . . . . . 26

Knife rack . . . . . . . . . . . . . . . . . . . . . 27

Baking sheet spray head. . . . . . . . . . 27

Unloading the dishwasher . . . . . . . . . 28

Adjusting the height of the basket. . . 28

Removing/installing cutlery drawer . . 29

Removing/installing upper basket . . . 30

Removing/installing lower basket . . . 31

. Detergent . . . . . . . . . . . . . . . . . . 32

Adding detergent. . . . . . . . . . . . . . . . 33

Combination detergent . . . . . . . . . . . 34

/ Overview of programmes . . . . . 35

Programme selection . . . . . . . . . . . . 36

Information for test institutes . . . . . . . 36

en

4

0 Additional functions . . . . . . . . . 37

Save time (VarioSpeedPlus) . . . . . . . 37

Half load . . . . . . . . . . . . . . . . . . . . . .37

hygienePlus (HygienePlus) . . . . . . . .37

intensiveZone . . . . . . . . . . . . . . . . . .37

extraDry . . . . . . . . . . . . . . . . . . . . . . .37

Shine and Dry . . . . . . . . . . . . . . . . . .37

Energy Save . . . . . . . . . . . . . . . . . . .37

1 Operating the appliance . . . . . . 38

Programme data . . . . . . . . . . . . . . . .38

Opening the door . . . . . . . . . . . . . . .38

Changing the settings . . . . . . . . . . . .38

AquaSensor . . . . . . . . . . . . . . . . . . . .38

Zeolith drying. . . . . . . . . . . . . . . . . . .39

Time display . . . . . . . . . . . . . . . . . . .39

Sensor setting . . . . . . . . . . . . . . . . . .39

extraDry . . . . . . . . . . . . . . . . . . . . . . .39

Eco forecast . . . . . . . . . . . . . . . . . . .39

Auto Power Off . . . . . . . . . . . . . . . . .40

emotionLight . . . . . . . . . . . . . . . . . . .40

Front display . . . . . . . . . . . . . . . . . . . 40

timeLight . . . . . . . . . . . . . . . . . . . . . .41

infoLight . . . . . . . . . . . . . . . . . . . . . . .41

Changing start programme . . . . . . . .41

Tone volume . . . . . . . . . . . . . . . . . . .41

Button volume . . . . . . . . . . . . . . . . . .41

Child-proof lock . . . . . . . . . . . . . . . . .41

Greeting. . . . . . . . . . . . . . . . . . . . . . .41

Factory setting . . . . . . . . . . . . . . . . . .41

Switching the appliance on . . . . . . . . 42

Time preselection . . . . . . . . . . . . . . .42

Programme end. . . . . . . . . . . . . . . . .42

Switching off the appliance . . . . . . . .42

Interrupting the programme . . . . . . . .43

Terminating the programme . . . . . . . 43

Changing the programme . . . . . . . . .43

2 Cleaning and maintenance . . . .43

Overall status of the dishwasher . . . 43

Machine Care. . . . . . . . . . . . . . . . . . 44

Special salt and rinse aid . . . . . . . . . 45

Filters . . . . . . . . . . . . . . . . . . . . . . . . 45

Spray arms. . . . . . . . . . . . . . . . . . . . 46

3 Fault, what to do? . . . . . . . . . . .46

Error message . . . . . . . . . . . . . . . . . 46

Waste water pump . . . . . . . . . . . . . . 47

Fault table . . . . . . . . . . . . . . . . . . . . 48

4 Customer service . . . . . . . . . . . .57

5 Installation and connection. . . .57

Contents of package . . . . . . . . . . . . 57

Safety instructions . . . . . . . . . . . . . . 57

Delivery . . . . . . . . . . . . . . . . . . . . . . 58

Technical specifications . . . . . . . . . . 58

Installation . . . . . . . . . . . . . . . . . . . . 58

Drainage connection . . . . . . . . . . . . 58

Drinking water connection . . . . . . . . 59

Warm water connection . . . . . . . . . . 59

Electrical connection . . . . . . . . . . . . 60

Removal . . . . . . . . . . . . . . . . . . . . . . 60

Transporting . . . . . . . . . . . . . . . . . . . 61

Protection against frost

(Emptying the appliance) . . . . . . . . . 61

Intended use en

5

8 Intended use

I nt ended use

■ This appliance is intended

for use in the home and

domestic environments.

■ Use the dishwasher only in

the home and only for its

designated purpose: for

washing domestic dishes.

■ This appliance is intended

for use up to a maximum

altitude of 2500 metres

above sea level.

( Safety instructions

Safety instructions

This appliance may be used by

children over the age of 8 years

old and by persons with

reduced physical, sensory or

mental capabilities or by

persons with a lack of

experience or knowledge if they

are supervised or are instructed

by a person responsible for

their safety how to use the

appliance safely and have

understood the associated

hazards.

Children must not play with, on,

or around the appliance.

Children must not clean the

appliance or carry out general

maintenance unless they are at

least 8 years old and are being

supervised.

Keep children below the age of

8 years old at a safe distance

from the appliance and power

cable.

Before you switch ON the

appliance

Please read the instructions for

use and installation carefully.

They contain important

information on how to install,

use and maintain the appliance.

Retain all documents for later

use or for the subsequent

owner.

You can download the

instructions for use from our

website free of charge. The

relevant Internet address can

be found overleaf on these

instructions for use.

Delivery

1. Check the packaging and

dishwasher immediately for

damage caused in transit.

Do not switch on a damaged

appliance, but contact your

supplier.

2. Please dispose of the

packaging material in an

environmentally friendly

manner.

3. Do not let children play with

packaging and its parts.

There is a risk of suffocation

from collapsible boxes and

film.

en Safety instructions

6

Installation

■ Following installation, ensure

that the back of the

dishwasher is not freely

accessible (protection

against contact due to hot

surface).

■ Install and connect the

appliance according to the

installation and assembly

instructions.

■ Prior to installation,

disconnect the dishwasher

from the power supply.

■ Ensure that the protective

conductor system of the

domestic supply has been

correctly installed.

■ The electrical connection

conditions must correspond

with the specifications on the

dishwasher rating plate 9J.

■ If the power cord of this

appliance is damaged, it

must be replaced with a

particular power cord.

To prevent injury, the power

cord may be purchased from

customer service only.

■ If the dishwasher is installed

in a high-sided unit, the unit

must be secured properly.

■ If the dishwasher is installed

below or above other

domestic appliances, follow

the information for

installation in combination

with a dishwasher in the

installation instructions for

the particular appliances.

■ Also follow the installation

instructions for the

dishwasher to ensure that all

appliances are operated

safely.

■ If there is no information or if

the installation instructions

do not include the

appropriate information,

contact the manufacturer of

these appliances to ensure

that the dishwasher can be

installed above or below

these appliances.

■ If you cannot obtain any

information from the

manufacturer, you must not

install the dishwasher above

or below these appliances.

■ If you install a microwave

oven above the dishwasher,

the microwave oven may be

damaged.

■ Install built-under or

integratable appliances only

under continuous worktops

which have been screwed to

adjacent cupboards to

ensure stability.

■ Do not install the appliance

near heat sources (radiators,

heat storage tanks, cookers

or other appliances which

generate heat) and do not

install under a hob.

Safety instructions en

7

■ Please note that the

insulation material of the

dishwasher power cord may

melt next to heat sources

(e.g. heating / hot water

installations) or hot

appliance parts. Make sure

that the power cord of the

dishwasher never comes into

contact with heat sources or

hot appliance parts.

■ After installing the appliance,

ensure that the plug is easily

accessible. ~ "Electrical

connection" on page 60

■ For some models:

The plastic housing on the

water connection contains an

electric valve. The supply

hose contains electrical

connection cables. Do not

cut through the supply hose.

Do not immerse the plastic

housing in water.

In daily use

Read and observe the safety

information and instructions for

use on the packaging for

cleaning and rinsing agents.

Ensure that you follow the

safety instructions, even when

operating the appliance via the

Home Connect app, which are

out of sight when you are away

from home. Follow the

instructions in the app.

Damage

■ The appliance may be

repaired and opened up by a

technician only. To do this,

disconnect the appliance

from the power supply. Pull

out the mains plug or switch

off the fuse. Turn off the tap.

■ If the appliance is damaged,

especially the control panel

(cracks, holes, broken

buttons), or the door function

is impaired, stop operating

the appliance. Pull out the

mains plug or switch off the

fuse. Turn off tap, call

customer service.

Disposal

1. Make redundant appliances

unusable to prevent

subsequent accidents.

2. Dispose of the appliance in

an environmentally friendly

manner.

:Warning

Risk of injury!

■ To prevent injuries, e.g.

caused by stumbling, open

the dishwasher only briefly in

order to load and unload the

dishwasher.

■ Knives and other utensils

with sharp points must be

placed with the points

downwards in the cutlery

basket*9" or horizontally

on the knife shelf* or in the

cutlery drawer*1*.

en Safety instructions

8

■ Do not lean or sit on the

open door.

■ In the case of free-standing

appliances, ensure that the

baskets are not overloaded.

The appliance could tip.

■ If the appliance is not in a

cavity and a side panel is

accessible, the door hinge

area must be covered at the

side for reasons of safety

(risk of injury). The covers

are available as optional

accessories from customer

service or specialist outlets.

* depending on the features of

your dishwasher

:Warning

Risk of explosion!

Do not add any solvents to the

rinsing compartment. Danger of

explosion!

:Warning

Risk of scalding!

Open the door carefully when

the programme is still running.

There is a risk of hot water

spraying out of the appliance.

:Warning

Risk to children!

■ If fitted, use the childproof

lock.

■ Do not allow children to play

with or operate the

appliance.

■ Keep children away from

detergents and rinse aid.

These may cause chemical

burns in the mouth, throat

and eyes or asphyxiation.

■ Keep children away from

open dishwasher. There may

be small parts in the

dishwasher which children

could swallow and the water

inside the dishwasher is not

drinking water as it may

contain detergent residue.

■ Ensure that children do not

place fingers in the tablet

collecting tray 1B. Small

fingers could become caught

in the slots.

■ When opening and closing

the door on an eye-level

appliance, ensure that

children do not become

jammed or crushed between

the appliance door and the

cupboard door below.

■ Children could become

locked in the appliance

(danger of suffocation) or get

into another dangerous

situation.

Redundant appliances: Pull

out the mains plug, sever

and dispose of the power

cord. Destroy the door lock

so that the door can no

longer be closed.

Childproof lock (door lock) *

Do o r lock

The child-proof lock (door lock)

protects children from potential

hazards which the dishwasher

poses.

Safety instructions en

9

:Warning

Risk of suffocation!

Children may become locked in

the dishwasher and suffocate.

Always completely close the

appliance door when leaving

the dishwasher.

Activate the child-proof lock

(door lock) as follows:

1. Pull the catch of the

child-proof lock towards

yourself (1).

2. Close the door (2).

The child-proof lock is

activated.

Open the door with activated

child-proof lock (door lock) as

follows:

1. Press the catch of the

child-proof lock to the right

(1).

2. Open the door (2).

Deactivate the child-proof lock

(door lock) as follows:

1. Press the catch of the

child-proof lock to the right

(1).

2. Press the catch of the

child-proof lock backwards

(2).

The childproof lock is

deactivated.

* depending on the features of

your dishwasher













en Environmental protection

10

7 Environmental

protection

Envi r onment al pr ot ec t i on

Both the packaging of new appliances

and the old appliances themselves

contain valuable raw materials and

recyclable materials.

Please dispose of the individual parts

separated according to type.

Please ask your dealer or inquire at

your local authority about current means

of disposal.

Packaging

All plastic parts of the appliance are

identified with internationally

standardised abbreviations (e.g. PS

polystyrene). Therefore, plastic waste

can be sorted out when the appliance is

being disposed of.

Please follow the safety instructions

under “Delivery” ~ Page 5.

Old appliances

Please follow the safety instructions

under “Disposal of your appliance”

~ Page 7.

* Getting to know your

appliance

Ge t t i n g to know your appl i ance

Diagrams of the control panel and the

interior of the appliance can be found at

the front of the manual. Individual

positions are referred to in the text.

Automatic door opening

To open the door without using the

handle, the appliance features an

automatic door opening system. Press

the upper middle part of the door and

the appliance will open by itself.

Control panel

* depending on the features of your

dishwasher

** number depending on the features of

your dishwasher

This appliance has been

identified in accordance with the

European Directive 2012/19/EU

on Waste Electrical and

Electronic Equipment (WEEE).

The directive provides a

framework for the collection and

recycling of old appliances,

which is valid across the EU.



( On/off switch

0 Programme buttons **

8 Info button {

@ Display window at top

H Rinse aid refill indicator

P Salt refill indicator

X WLAN display

` Selection buttons

h Time preselection

)" Remote start button

)* Additional functions/programme

buttons **

)2 START button

): Front display *

)B Door opener

)J Remote start display *

)R < > button

Getting to know your appliance en

11

Appliance interior

* depending on the features of your

dishwasher

Info button {

Info but t on

The Info button { can be used to

display additional programme

information.

1. Press the Info button { 8.

2. Press the programme button.

Information on the selected

programme is indicated on the

display window at the top @.

3. To leave, press Info button { 8.

Time setting

Ti me set t i ng

When the appliance is switched on the

for the first time, the time starts at 12:00

o’clock.

Set the time as follows:

1. Open the door.

2. Switch on ON/OFF switch (.

3. Press Info button { 8 for 3

seconds until the following text is

indicated on the display window at

the top @:

Scroll with < >

Set with - +

Leave with Setup 3 sec.

4. Keep pressing button > )R until the

time setting is indicated on the

display window at the top @.

5. Make the setting with setting buttons

+ - `. If the selection buttons + -

` are held down, the set values

are changed in 10-minute steps.

6. Press and hold the Info button {

8 for 3 seconds.

The chosen setting has now been

stored.

Note: If the appliance was

disconnected from the power supply for

a prolonged period, the time starts at

12:00 o’clock. Set the time.

1" Interior light *

1* Cutlery drawer *

12 Top basket

1: Upper spray arm

1B Tablet collecting tray

1J Intake opening

1R Blow opening (Zeolith container)

1Z Lower spray arm

1b Dispenser for special salt

1j Filters

9" Cutlery basket *

9* Bottom basket

92 Dispenser for rinse aid

9: Detergent dispenser

9B Lock for detergent dispenser

9J Rating plate

en Getting to know your appliance

12

Initial start-up

When the dishwasher is switched on for

the first time, you are taken directly to

the settings for the initial start-up.

Note: If you select Home Connect

during the initial start-up, make further

settings via your dishwasher App.

Observe the supplied Home Connect

documents.

On the display window at the top @

the following text appears for manual

selection:

Scroll with < >

Set with - +

Leave with Setup 3 sec.

The required settings for the initial

start-up are listed in the table below.

To change the setting:

1. Keep pressing button > )R until the

required setting is displayed.

Change the setting with setting

buttons + - `.

2. Press and hold the Info button {

8 for 3 seconds.

The chosen setting has now been

stored.

--------

Initial start-up settings Factory setting Infotext

by pressing Info button {

Language Deutsch Language selection.

Home Connect Manual/Home Connect Manual/Home Connect.

Time format 24 h 12h or 24h.

Time setting 12:00 Set the current time.

Water hardness °E 16 - 20 medium Adjustment to the local water hardness.

When using Multitabs, select the lowest

setting.

Rinse aid disp. Level 5 Amount of rinse aid affects drying. When

using Multitabs, select setting 0.

Water connection * Cold water Connection to hot water (40-60°C) or cold

water (<40°C) possible.

* depending on the features of your dishwasher

Getting to know your appliance en

13

Settings

The dishwasher has been preset with

certain settings for your convenience.

However you can also change this

factory setting.

To change the setting:

1. Open the door.

2. Switch on ON/OFF switch (.

3. Press Info button { 8 for 3

seconds until the following text is

indicated on the display window at

the top @

Scroll with < >

Set with - +

Leave with Setup 3 sec.

.

4. Keep pressing button > )R until the

required setting is displayed.

Make the setting with setting buttons

+ - `.

5. Press and hold the Info button {

8 for 3 seconds.

The chosen setting has now been

stored.

You have the option of resetting all

changed settings back to the original

factory settings.

Note: When you reset your dishwasher

to the factory settings, you are taken

directly to the settings for the initial

start-up.

Basic setting Factory setting Infotext;

by pressing Info button {

Time setting 12:00 Set the current time.

Time format 24h 12h or 24h.

Time display Time Show end of programme with display

“Ready in” or “Finish at”.

Sprache/Language Deutsch Language selection.

Water hardness °E 16 - 20 medium Setting water hardness. When using

Multitabs, select the lowest setting.

Rinse aid dispenser Level 5 Amount of rinse aid affects drying. When

using Multitabs, select setting 0.

Sensor setting Standard Adjustment of soiling detection for

optimum cleaning result.

ExtraDry Off Improved drying for glasses and plastic

tableware.

Water connection * Cold water The dishwasher can be connected to

either hot (40-60°C) or cold water

(<40°C).

Eco forecast Off Show the water and energy consumption.

Auto Power Off After 1 min. Appliance automatically switches off at

end of rinsing process.

emotionLight On Interior light.

Emotion Light 1 Level 4 Brightness setting for interior lighting.

* depending on the configuration of your specific dishwasher

en Getting to know your appliance

14

--------

Emotion Light 2 Depending on the specific

configuration of your dishwasher

Colour setting for the interior lighting.

Emotion Light 3 On Visual signalling of faults.

Front display * On The front display can be selected.

timeLight * On While a programme is running, status

information is projected onto the floor.

infoLight * On Light is projected to signal an active

washing cycle.

Start up programme Eco 50° When you switch on, the most recently

selected programme appears.

Tone volume * Level 2 Volume of the signal at the end of a

programme.

Button volume Level 2 Volume when using button.

Child-proof lock * Off Activated child-proof lock impedes

opening of door.

Wi-Fi On/Off Switch wireless network connection

on/off.

Network login Manual/Automatic Test WPS function on router.

No WPS function: Manual

WPS function: Automatic

Connect to App Start with + Connect dom. appliance to mobile

terminal device.

Energy manager * Connect with + Connect dom. appliance to energy

manager of home system.

Eco drying * On Door opens automatically at the end of the

programme.

Greeting On When switching on the appliance, the

brand logo can be switched off.

Factory setting Reset Reset to factory setting.

Basic setting Factory setting Infotext;

by pressing Info button {

* depending on the configuration of your specific dishwasher

Home Connect en

15

Note:

■ The “Network login” menu option is

not available unless Wi-Fi has been

switched on.

■ The “Connect to App” menu option

is not available unless there was a

connection to the home network.

■ The “Energy manager” menu option

is not available unless there was a

connection to the home network and

the appliance is connected to the

app.

o Home Connect

Ho me Co n n e c t

The availability of the Home Connect

function depends on the availability of

Home Connect services in your country.

Home Connect services are not

available in every country. You can find

more information here at

www.home-connect.com.

This dishwasher is Wi-Fi capable and

can be remotely controlled via a mobile

device.

If your dishwasher does not connect to

the home network, you can also operate

the dishwasher manually by pressing

the buttons.

Info button {

Info but t on

The Info button { can be used to

display additional programme

information.

1. Press the Info button { 8.

2. Press the programme button.

Information on the selected

programme is indicated on the

display window at the top @.

3. To leave, press Info button { 8.

Setting up the App

To be able to operate the appliance via

Home Connect, the Home Connect App

must be installed on your mobile

terminal device.

Observe the supplied Home Connect

documents.

Follow the steps specified by the App to

make the settings.

en Home Connect

16

Setting up Home Connect

You can set your dishwasher by

pressing the remote start button })"

or proceed as follows:

1. Open the door.

2. Switch on ON/OFF switch (.

3. Press Info button { 8 for 3

seconds until the following text is

indicated on the display window at

the top @:

Scroll with < >

Set with - +

Leave with Setup 3 sec.

4. Keep pressing button > )R until the

required setting is indicated on the

display window at the top @.

5. Make the setting with setting buttons

+ - `.

6. Press and hold the Info button {

8 for 3 seconds.

The chosen setting has now been

stored.

Wi-Fi |

Wi-Fi

In the Wi-Fi menu you can activate the

wireless network connection with “on”

and deactivate it with “off”.

Notes

■ If you have selected the Wi-Fi “off”

setting, the “Network login” and

“Connect to App” settings are not

available.

■ Remote control of the appliance

requires a stable wireless network

connection.

Network login

The “Network login” menu option is not

available unless you have activated

Wi-Fi.

In the “Network login” menu you can

select between “Autom./WPS” and

“Manual” to connect the dishwasher to

your home network.

Automatic: Connect to the home

network using the WPS function of your

router.

Manual: Connect your mobile terminal

device to the Home Connect network.

The network settings are then manually

entered using the Home Connect App

to connect to your home network.

Following successful connection, the

following text is indicated on the display

window at the top @.

Observe the supplied Home Connect

documents.

:L)L

!



RQ

1HWZRUNORJLQ

!

0DQXDO



$XWRP:36

3UHVV:36EXWWRQ

RQWKHURXWHU

PV

6XFFHVVIXO

1HWZRUNORJLQ

Home Connect en

17

Connect to App

The “Connect to App” menu option is

not available unless there was a

connection to the home network.

The “Connect to App” setting

establishes the link between the

dishwasher, App and your user account.

Following successful connection, the

following text is indicated on the display

window at the top @.

Observe the supplied Home Connect

documents.

About data protection:

When your Home Connect dishwasher

is connected for the first time to a WLAN

network, which is connected to the

Internet, your Home Connect

dishwasher transmits the following

categories of data to the Home Connect

server (initial registration):

■ Unique appliance identification

(consisting of appliance codes as

well as the MAC address of the

installed Wi-Fi communication

module).

■ Security certificate of the Wi-Fi

communication module (to ensure a

secure IT connection).

■ The current software and hardware

version of your dishwasher.

■ Status of any previous resetting to

factory settings.

This initial registration prepares the

Home Connect functions for use and is

activated the first time you use these

Home Connect functions. Please ensure

that the Home Connect functions can

be used only in conjunction with the

Home Connect App. Information on

data protection can be accessed in the

Home Connect app.

Remote start button }

Re mot e st ar t but t on

When the dishwasher is connected to

the home network, activate the

dishwasher remote control by pressing

the remote start button })".

If the dishwasher has still not logged

into Home Connect, access the Home

Connect settings by pressing the

remote start button })".

Observe the supplied Home Connect

documents.

Notes

■ When the login process is complete,

the remote start button })" goes

out

■ To activate the remote control, press

the remote start button })".

■ If the Home Connect Assistant was

aborted during start-up, press the

remote start button })" again.

■ If the connection to the router fails,

the WLAN X display flashes on

the display.

&RQQHFWWR$SS

!



6WDUWZLWK

6XFFHVVIXO

&RQQHFWWR$SS

en Home Connect

18

Wi-Fi without a connection to

the Home Connect server †

Wi-Fi wi t hout a connec t i on to the Ho me Connect ser ver

You can use the Home Connect app

to disconnect from the Home Connect

server.

The appliance is then locally connected

to your mobile device without however

any connection to the Home Connect

server.

Note: If you did not deactivate the

connection to the Home Connect

server, check your Internet connection.

Remote diagnostics …

Re mot e di agnost i cs

Customer Service can use Remote

diagnostics … to access your appliance

if you contact them.

Notes

■ You have to confirm Customer

Service access on your appliance.

■ You can switch off Remote

diagnostics … using the on/off

switch ( or deactivate Customer

Service access in the Home Connect

app.

Setting up energy manager „

Setti ng up ener gy manager

With the energy manager „ your

dishwasher is automatically started

during a time period you select with the

cheapest power supply offered at the

time by your alternative energy source

(e.g. photovoltaic system).

Should the energy manager „ be

unable to start the dishwasher remotely

(e.g. no power available), it will start the

dishwasher at the latest possible time

with a conventional power supply.

This is how to set up the energy

manager „:

1. Open the door.

2. Switch on ON/OFF switch (.

3. Press Info button { 8 for 3

seconds until the following text is

indicated on the display window at

the top @:

Scroll with < >

Set with - +

Leave with Setup 3 sec.

4. Keep pressing button > )R until the

required setting is indicated on the

display window at the top @.

5. Make the setting with setting buttons

+ - `.

6. In the next 2 minutes connect your

dishwasher with the energy manager

of the home system. When doing so,

also activate connection to the

energy manager of your home

system (observe the instruction

manual of your energy manager

manufacturer).

Following successful connection of the

dishwasher to the energy manager of

your home system, the following

message is indicated on the display

window at the top @. If login of the

energy manager is unsuccessful, please

repeat Step 6.

Note: The “Energy manager” menu

option is not available unless there was

a connection to the home network and

the appliance is connected to the app.

Further information and system

requirements for using the energy

manager can be found at

www.home-connect.com/energymana

gement

Home Connect en

19

Activating energy manager „

Ac t i v a t i n g ener gy manager

To start the energy manager „ , you

must activate the remote start button }

)" and select time preselection h.

Once you have activated the remote

start button } )", you can use the

Home Connect app to perform time

preselection h.

You can also activate the energy

manager „ manually using the buttons

on the dishwasher.

This is how to activate the energy

manager „ on the dishwasher:

1. Open the door.

2. Switch on ON/OFF switch (.

3. Select programme 0.

4. Press time preselection button h.

5. Keep pressing the setting buttons + -

` until the displayed time

corresponds with your requirements.

6. Press START button )2. Time

preselection is activated.

7. Activate the remote start button }

)".

8. Following successful activation, @

“Flex Start” is indicated on the

display window at the top.

The energy manager „ now has

access to the dishwasher and can

start it during the time period

selected.

Note:

■ Where the energy manager „ starts

the programme earlier, the time

display “Ready in” / “Finish at” will

be updated.

■ To activate the energy manager „ ,

you must have set it up beforehand.

Deactivating energy manager

„

Deac t i vat i ng ener gy manager

The menu option “Disconnect with +” is

available when the dishwasher is

connected with the energy manager of

the home system.

This is how to deactivate the energy

manager:

1. Open the door.

2. Switch on ON/OFF switch (.

3. Press Info button { 8 for 3

seconds until the following text is

indicated on the display window at

the top @:

Scroll with < >

Set with - +

Leave with Setup 3 sec.

4. Keep pressing button > )R until the

required setting is indicated on the

display window at the top @.

5. Make the setting with setting buttons

+ - `.

6. Press Info button { 8 for 3

seconds.

At the end of this process the energy

manager is deactivated. A new energy

manager can now be connected.

Declaration of Conformity y

De c l a r a t i o n of Co n f o r mity

BSH Hausgeräte GmbH hereby

declares that the appliance which

features Home Connect is in

accordance with the basic requirements

and the other relevant provisions of the

directive 2014/53/EU.

A detailed RED Declaration of

Conformity can be found online at

www.siemens-home.bsh-group.com on

the product page of your appliance with

the additional documents.

:L)LLVDUHJLVWHUHGWUDGHPDUN

RI:L)L$OOLDQFH

en Water softening system/special salt

20

+ Water softening

system / special salt

Wat er sof t eni ng sys t em/speci al sal t

To ensure good rinsing results, the

dishwasher requires soft water, i.e.

water which is low in lime, otherwise

limescale will be deposited on the

utensils and interior container. Tap

water above 7° dH (1.2 mmol/l) must

be softened. The water is softened with

special salt (regeneration salt) in the

water softening system

of the dishwasher. The setting and

therefore the required amount of salt

depends on the degree of hardness of

your tap water (see following water

hardness table).

Water hardness table

Adjusting the water softening

system

The amount of salt dispensed can be

set from 0 to 62°E. Salt is not required

at the set value 0-8.

Set the softening system as follows:

1. Ask your local water utility company

for the water hardness value of the

tap water.

2. Required setting can be found in the

water hardness table.

3. Open the door.

4. Switch on ON/OFF switch (.

5. Press Info button { 8 for 3

seconds until the following text is

indicated on the display window at

the top @:

Scroll with < >

Set with - +

Leave with Setup 3 sec.

6. Keep pressing button > )R until the

water hardness is indicated on the

display window at the top @.

7. Make the setting with setting buttons

+ - `.

8. Press and hold the Info button {

8 for 3 seconds.

The chosen setting has now been

stored.

Using special salt

As soon as the low salt indicator P is

lit on the control panel or is requested

on the front display * ):, salt should

be topped up. Always refill with special

salt immediately before switching on the

appliance. This ensures that overrun

special salt solution is immediately

washed out and does not corrode

the rinsing tank.

Caution!

Detergent will destroy the water

softening system! Never pour detergent

into the salt dispenser.

















:DWHU

KDUGQHVV

YDOXH(

VRIW

PHGLXP

KDUG

Ȣ

Ȣ

Ȣ

Ȣ

Ȣ

Ȣ

Ȣ

Ȣ

PPROO

Ȣ

Ȣ

Ȣ

Ȣ

Ȣ

Ȣ

Ȣ

Ȣ

6HWYDOXH

RQWKH

PDFKLQH

+DUGQHVV

UDQJH

KDUG

PHGLXP

VRIW

Water softening system/special salt en

21

Top up the salt as follows:

1. Undo the screw plug on the

dispenser 1b.

2. Fill the dispenser with water

(required only when switching on the

appliance for the first time).

3. Add salt as illustrated (do not use

table salt or tablets).

The water is displaced and runs out.

* depending on the features of your

dishwasher

Using detergents with salt

component

De t e r g e n t wi t h a sal t component

If combined detergents with a salt

component are used, special salt can

usually be omitted up to a water

hardness of 21° dH (37° fH,

26° Clarke, 3.7 mmol/l). If the water

hardness is over 21° dH, salt must be

used.

Switching off low salt

indicator / water softening

system

Swi t c h i n g of f wa t e r sof t eni ng syst em

If the use of combined detergents with

a salt component impairs the low salt

indicator P on the control panel or

the text on the display window at the

top @ (enough salt for x rinse cycles),

the displays can be switched off.

Proceed as described under “Setting

water softening system” and set the

value to 0-8. The water softening system

and salt refill indicator are now switched

off.

*

Page is loading ...

Siemens SN878D36TE/38 User manual

Siemens SN878D36TE/38 User manual

Related papers

Other documents