Dynex DX-M100 User manual

Brand: Dynex

Model: DX-M100

Category: Networking

Type: User manual

Dynex DX-M100 is a 56K Data/Fax/Voice Modem that supports the following communication standards:

Data:

V.92 (Lite)
V.90, V.34, V.32bis, V.32
V.22bis, V.21
V.22Bell 103 & 212A
V.44, V.42bis & MNP 5 (Data compress)
V.42 & MNP2-4 (Error correction)

Fax:

V.17 (14,400bps)
V.29 (9,600bps)
V.27 (4,800bps)

Voice:

Voice/Audio mode
Speaker/Phone jack

With this modem, you can:

Dynex DX-M100 is a 56K Data/Fax/Voice Modem that supports the following communication standards:

Data:

V.92 (Lite)
V.90, V.34, V.32bis, V.32
V.22bis, V.21
V.22Bell 103 & 212A
V.44, V.42bis & MNP 5 (Data compress)
V.42 & MNP2-4 (Error correction)

Fax:

V.17 (14,400bps)
V.29 (9,600bps)
V.27 (4,800bps)

Voice:

Voice/Audio mode
Speaker/Phone jack

With this modem, you can:

P/N: 2300-0245

56K Data/Fax/Voice Modem

Model No.: DX-M100

www.dynexproducts.com

Installation Guide

Part 4. Modem Dialing Location

FCC Certifications

This device complies with Part 15 of the FCC rules. Operation

is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2)

This device must accept any interference received, including

interference that may cause undesired operation.

CE Mark Warning

This is a Class B product. In a domestic environment, this

product may cause radio interference.

Following the instructions below, you can change the dialing

location.

1. In Windows 2000/XP, Click Start Settings Control Panel

Phone And Modem Options Under Dialing Rules click

Edit, and then you can change your location.

2. In Windows ME/NT/98, click Control Panel Modem

Under General click Dialing Properties, and then you

can change your location.

DX-M100 56K Data/Fax/Voice Modem PCI Card

Driver & Application software CD-ROM

Quick Installation Guide

Package Checklist

Part 1. Hardware Installation

With the power to your PC disconnected, remove the PC's

casing. Press the modem card firmly into the PCI slot, and

secure it with screws to your PC. Reinstall the casing on your

PC.

Part 2. Installation Procedures

In some case, Windows operating system will get the default

driver and install the modem automatically. Please follow the

process below to update the driver of your modem.

1. Find the modem from Start Settings Control Panel

System Hardware Device Manager Modem.

Double-click the modem description, e.g., Intel(R) 536EP

Modem. Click Properties.

2. Select Driver and click Update Driver.

3. The wizard will search for new driver. Select Don't search. I

will choose the driver to install and click Next.

4. Click Browse to search for driver files and open it, e.g., (CD

-ROM) D:\DRIVER\WINxx. Click OK and then click Next.

5. Click Finish.

Part 3. Update Driver

3 4

DX-M100 supports the following communication standards.

ITU-T is also known as CCITT.

Features

Driver installation for Windows O/S

The following instructions apply for Windows 98, 98SE, ME, NT,

2000 and XP. Some of the screens may differ slightly across

operating systems.

1. Once the device is properly connected to your computer,

Windows O/S will automatically detect the new hardware

device. Click Next.

2. Select Search for the best driver for your device

(Recommended). Click Next.

3. Insert the device driver disk into your CD-ROM. Select

Specify a location, and click Browse to search for driver

files and open it, e.g., (CD-ROM) D:\DRIVER\Winxx. Click

Next.

4. Windows found the driver of this modem. Click Next.

5. Click Finish to complete the installation.

6. Wait until the drivers were installed automatically.

Note: Windows will notify you that the driver has not passed

Windows Logo testing. This is normal, and it has been

verified that the Adapter does work with Windows XP.

Click Continue Anyway.

Data

V.92 (Lite)

V.90, V.34, V.32bis, V.32

V.22bis, V.21

V.22Bell 103 & 212A

V.44, V.42bis & MNP 5 (Data compress)

V.42 & MNP2-4 (Error correction)

Fax

V.17 (14,400bps)

V.29 (9,600bps)

V.27 (4,800bps)

Voice

Voice/Audio mode

Speaker/Phone jack

Dynex DX-M100 User manual

Brand: Dynex

Model: DX-M100

Category: Networking

Type: User manual

Dynex DX-M100 is a 56K Data/Fax/Voice Modem that supports the following communication standards:

Data:

V.92 (Lite)
V.90, V.34, V.32bis, V.32
V.22bis, V.21
V.22Bell 103 & 212A
V.44, V.42bis & MNP 5 (Data compress)
V.42 & MNP2-4 (Error correction)

Fax:

V.17 (14,400bps)
V.29 (9,600bps)
V.27 (4,800bps)

Voice:

Voice/Audio mode
Speaker/Phone jack

With this modem, you can:

Download PDF

report

Dynex DX-M100 User manual

Dynex DX-M100 User manual

Related papers

Other documents