Optoma Optoma EX615 User manual

1

English

Table of Contents ...................................................................................1

Usage Notice ..........................................................................................2

Safety Information .........................................................................................2

Precautions....................................................................................................3

Eye Safety Warnings .....................................................................................5

Product Features ...........................................................................................5

Introduction.............................................................................................6

Package Overview.........................................................................................6

Product Overview ..........................................................................................7

Main Unit ................................................................................................................ 7

Control Panel ......................................................................................................... 8

Input / Output Connections .................................................................................... 9

Remote Control .................................................................................................... 11

Installation ............................................................................................12

Connecting the Projector .............................................................................12

Connect to Computer/Notebook .......................................................................... 12

Connect to Video Sources ................................................................................... 13

Powering On/Off the Projector .....................................................................14

Powering On the Projector ................................................................................... 14

Powering Off the projector ................................................................................... 15

Warning Indicator ................................................................................................. 15

Adjusting the Projected Image.....................................................................16

Adjusting the Projector’s Height ........................................................................... 16

Adjusting the Projector’s Zoom / Focus ............................................................... 17

Adjusting Projected Image Size ........................................................................... 17

User Controls ....................................................................................... 18

Control Panel & Remote Control .................................................................18

Control Panel ....................................................................................................... 18

Remote Control .................................................................................................... 19

Using the HELP button ........................................................................................ 21

On-screen Display Menus ...........................................................................24

How to operate .................................................................................................... 24

Menu Tree ............................................................................................................ 25

Image ................................................................................................................... 27

Display ................................................................................................................. 31

Setup .................................................................................................................... 35

Options ................................................................................................................. 45

Appendices...........................................................................................48

Troubleshooting ...........................................................................................48

Projector Status Indication ..........................................................................51

Remote Control ...........................................................................................52

Replacing the Lamp.....................................................................................53

Compatibility Modes ....................................................................................55

RS232 Commands and Protocol Function List............................................57

Ceiling Mount Installation ............................................................................61

Optoma Global Ofces ................................................................................62

Regulation & Safety notices ........................................................................64

Table of Contents

2

English

Usage Notice

Safety Information

The lightning  ash with arrow head within an equilateral triangle is

intended to alert the user to the presence of uninsulated “dangerous

voltage” within the product’s enclosure that may be of suf cient

magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert

the user to the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the appliance.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT

EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH

VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE

CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.

Class B emissions limits

This Class B digital apparatus meets all requirements of the Canadian

Interference-Causing Equipment Regulations.

Important Safety Instruction

1. Do not block any ventilation openings. To ensure reliable operation of

the projector and to protect from over heating, it is recommended to

install the projector in a location that does not block ventilation. As an

example, do not place the projector on a crowded coffee table, sofa,

bed, etc. Do not put the projector in an enclosure such as a book case

or a cabinet that restricts air  ow.

2. Do not use the projector near water or moisture. To reduce the risk

of  re and/or electric shock, do not expose the projector to rain or

moisture.

3. Do not install near heat sources such as radiators, heaters, stoves or

any other apparatus such as ampli ers that emits heat.

4. Clean only with dry cloth.

5. Only use attachments/accessories speci ed by the manufacturer.

6. Do not use the unit if it has been physically damaged or abused.

Physical damage/abuse would be (but not limited to):

 Unit has been dropped.

 Power supply cord or plug has been damaged.

 Liquid has been spilled on to the projector.

 Projector has been exposed to rain or moisture.

 Something has fallen in the projector or something is loose inside.

Do not attempt to service the unit yourself. Opening or removing covers

may expose you to dangerous voltages or other hazards. Please call

Optoma before you send the unit for repair.

7. Do not let objects or liquids enter the projector. They may touch

dangerous voltage points and short out parts that could result in  re or

electric shock.

8. See projector enclosure for safety related markings.

9. The unit should only be repaired by appropriate service personnel.

3

English

Usage Notice

When the lamp

reaches the end

of its life, the

projector will

not turn back on

until the lamp

module has

been replaced.

To replace the

lamp, follow

the procedures

listed under

“Replacing the

Lamp” section

on pages 53-54.

Precautions

Please follow all warnings, precautions and

maintenance as recommended in this user’s

guide.

▀■ Warning- Do not look into the projector’s lens when the lamp is

on. The bright light may hurt and damage your eyes.

▀■ Warning- To reduce the risk of  re or electric shock, do not

expose this projector to rain or moisture.

▀■ Warning- Please do not open or disassemble the projector as

this may cause electric shock.

▀■ Warning- When replacing the lamp, please allow the unit to

cool down. Follow instructions as described on pages

53-54.

▀■ Warning- This projector will detect the life of the lamp itself.

Please be sure to change the lamp when it shows

warning messages.

▀■ Warning- Reset the “Lamp Reset” function from the on-screen

display “Options|Lamp Settings” menu after replacing

the lamp module (refer to page 47).

▀■ Warning- When switching the projector off, please ensure

the cooling cycle has been completed before

disconnecting power. Allow 90 seconds for the

projector to cool down.

▀■ Warning- Do not use lens cap when projector is in operation.

▀■ Warning- When the lamp is approaching the end of its lifetime,

the message “Lamp Warning: Lamp life exceeded.”

will show on the screen. Please contact your local

reseller or service center to change the lamp as soon

as possible.

▀■ Warning- Do not look into or point the laser pointer on your

remote control into your or someone’s eyes. Laser

pointer can cause permanent damage to eyesight.

4

English

Usage Notice

Do:

  Turn off and unplug the power plug from the AC outlet before

cleaning the product.

  Use a soft dry cloth with mild detergent to clean the display

housing.

  Disconnect the power plug from AC outlet if the product is

not being used for a long period of time.

Do not:

  Block the slots and openings on the unit provided for

ventilation.

 Use abrasive cleaners, waxes or solvents to clean the unit.

 Use under the following conditions:

- In extremely hot, cold or humid environments.



Ensure that the ambient room temperature is within

5 - 35°C.



Relative Humidity is 5 - 35°C, 80% (Max.),

non-condensing.

-

In areas susceptible to excessive dust and dirt.

- Near any appliance generating a strong magnetic eld.

- In direct sunlight.

5

English

Usage Notice

Eye Safety Warnings

▀■ Avoid staring/facing directly into the projector beam at all

times. Keep your back to the beam as much as possible.

▀■ When projector is used in a classroom, adequately supervise

students when they are asked to point out something on the

screen.

▀■ In order to minimize the lamp power, use room blinds to

reduce ambient light levels.

Product Features

▀■ XGA (1024x768) Native resolution

▀■ HD compatible – 1080p supported

▀■ VGA monitor loop through

(works on standby mode > 1W)

▀■ BrilliantColor

TM

Technology

▀■ Security Bar and Kensington Lock

▀■ RS232 control

▀■ Rapid shutdown

▀■ Built-in speaker

▀■ Network support (on specic models)

6

English

Introduction

Due to different

applications in

each Country,

some regions

may have

different

accessories.

Power Cord 1.8m

IR Remote Control

Package Overview

Unpack and inspect the box contents to ensure

all parts listed below are in the box. If something

is missing, please contact your nearest customer

service center.

Documentation :



User’s Manual



Warranty Card



Quick Start Card



WEEE Card

(for EMEA only)

2 × AAA Batteries

Projector with lens cap

POWER

?

/?

VGA Cable 1.8m

7

English

Introduction

Product Overview

1. Control Panel

2. Zoom Ring

3. Focus Ring

4. Zoom Lens

5. IR Receivers

6. Tilt-Adjustment Feet

7. Security Bar

8. Input / Output

Connections

9. Power Socket

VGA1-IN / YPbPr

/

VGA2-IN

/

SCART

/

YPbPr

VGA-OUT

S-VIDEO

VIDEO

AUDIO-OUT

VGA 1

AUDIO1-IN

RS232

USB

VGA 2

AUDIO2-IN

HDMI

RJ45

S-VIDEO/VIDEO

AUDIO3-IN

12V OUT

?

POWER

7

8

6

POWER

?

2

6

5

3

4

1

5

9

8

English

Introduction

Control Panel

POWER

?

8

62 4 53

7

11

10

9

1

1. Help

2. Menu

3. Source

4. Enter

5. Re-Sync

6. Power

7. Keystone Correction

8. Four Directional Select Keys

9. On/Standby LED

10. Lamp Fail LED

11. Temp LED

12. IR Receiver

12

9

English

Introduction

Input / Output Connections

1. RJ45 Networking Connector

2. USB Connector (Connect to PC for Remote Mouse function)

3. HDMI Connector

4. VGA1-In/YPbPr/” ” Connector

(PC Analog Signal/Component Video Input/HDTV/YPbPr/

Wireless Dongle)

5. VGA-Out Connector (Monitor Loop-through Output from

VGA1-In)

6. S-Video Input Connector

7. Composite Video Input Connector

8. Audio Output Connector (3.5mm Mini Jack)

7. Power Socket

9. VGA2-In/SCART/YPbPr Connector

(PC Analog Signal/Component Video Input/HDTV/SCART/

YPbPr)

10. RS-232 Connector (9-pin)

VGA1-IN / YPbPr /

VGA2-IN / SCART / YPbPr

VGA-OUT

S-VIDEO VIDEO

AUDIO-OUT

VGA 1

AUDIO1-IN

RS232

USB

VGA 2

AUDIO2-IN

HDMI

RJ45

S-VIDEO/VIDEO

AUDIO3-IN

12V OUT

5

9

87642

10 13

14 15

7

1 3 16

1211

10

English

Introduction

VGA1-IN / YPbPr /

VGA2-IN / SCART / YPbPr

VGA-OUT

S-VIDEO VIDEO

AUDIO-OUT

VGA 1

AUDIO1-IN

RS232

USB

VGA 2

AUDIO2-IN

HDMI

RJ45

S-VIDEO/VIDEO

AUDIO3-IN

12V OUT

5

9

87642

10 13

14 15

7

1 3 16

1211

11. Audio 3 Input connector (3.5mm mini jack)

(for S-video / Video)

12. Audio 2 Input connector (3.5mm mini jack)

(for VGA 2)

13. Audio 1 Input connector (3.5mm mini jack)

(for VGA 1)

14. Kensington

TM

Lock Port

15. Security Bar

The item below is only present on speci c models.

16. 12V Trigger Relay Connector

11

English

Introduction

Remote Control

1. LED Indicator

2. Power On/Off

3. Page Up

4. Mouse Right Click

5. Four Directional

Select Keys

6. Re-Sync

7. Page Down

8. Volume +/-

9. Zoom

10. AV mute

11. Video

12. VGA

13. Freeze

14. S-Video

15. HDMI

16. Brightness

17. Menu

18. Keystone +/-

19. Source

20. Enter/Help

21. Mouse Left Click

22. PC/Mouse control

23. Numbered keypad

(for password input)

24. Laser Pointer

/?

1

9

10

1213

22

14

15

16

20

17

8

11

23

19

6

4

2

18

3

7

5

21

24

12

English

Installation

Connecting the Projector

Connect to Computer/Notebook

1....................................................................................................Power Cord

2.....................................................................................................VGA Cable

3..............................................................................................*Network Cable

4....................................................................................................*USB Cable

5...........................................................................................*DVI/HDMI Cable

6................................................................................................*RS232 Cable

7.........................................................................................*Audio Input Cable

8........................................................................................*VGA Output Cable

9......................................................................................*Audio Output Cable

VGA1-IN / YPbPr/

VGA2-IN /SCART / YPbPr

VGA-OUT

S-VIDEO VIDEO

AUDIO-OUT

VGA 1

AUDIO1-IN

RS232

USB

VGA 2

AUDIO2-IN

HDMI

RJ45

S-VIDEO/VIDEO

AUDIO3-IN

12V OUT

E62405SP

R

MOLEX

1

4

2

3

7

6

5

+ 12V Output

8

9

I/O con guration

depends on

models.

Due to the

difference in

applications for

each country,

some regions may

have different

accessories.

(*) Optional

accessory

13

English

Installation

VGA1-IN / YPbPr/

VGA2-IN /SCART / YPbPr

VGA-OUT

S-VIDEO VIDEO

AUDIO-OUT

VGA 1

AUDIO1-IN

RS232

USB

VGA 2

AUDIO2-IN

HDMI

RJ45

S-VIDEO/VIDEO

AUDIO3-IN

12V OUT

E62405SP

R

Connect to Video Sources

1....................................................................................................Power Cord

2.....................................................................................................VGA Cable

3................................................................................*Composite Video Cable

4.............................................................................................. *S-Video Cable

5................................................*15-Pin to 3 RCA Component/HDTV Adaptor

6.............................................................................*3 RCA Component Cable

7................................................................................... *SCART/VGA Adaptor

8.................................................................................*Audio Cable Jack/RCA

9..................................................................................................*HDMI Cable

10............................................................................................*Network Cable

Composite Video Output

DVD Player, Set-top Box,

HDTV receiver

S-Video Output

1

3

4

6

2

7

5

8

9

10

DVD Player, Set-top Box,

HDTV receiver

+ 12V Output

I/O con guration

depends on

models

Due to the

difference in

applications for

each country,

some regions may

have different

accessories.

(*) Optional

accessory

14

English

Installation

Powering On/Off the Projector

Turn on the

projector  rst and

then select the

signal sources.

Powering On the Projector

1. Remove the lens cap. 

2. Securely connect the power cord and signal cable. When

connected, the ON/STANDBY LED will turn Amber.

3. Turn on the lamp by pressing “ ” button either on the top of

the projector or on the remote. The ON/STANDBY LED will

now turn Green. 

The startup screen will display in approximately 10 seconds.

The  rst time you use the projector, you will be asked to

select the preferred language and power saving mode.(*)

4. Turn on and connect the source that you want to display

on the screen (computer, notebook, video player, etc). The

projector will detect the source automatically. If not, push

menu button and go to “OPTIONS”.

Make sure that the “Source Lock” has been set to “Off”.

If you connect multiple sources at the same time, press the

“SOURCE” button on the control panel or direct source keys

on the remote control to switch between inputs.

POWER

?

POWER

?

Lens Cap

1

Power

2

(*) When power

saving mode

is enabled, the

VGA & Audio

pass-through,

RS-232 and

RJ45 will be

de-activated

during standby

mode.

15

English

Installation



Contact the

nearest service

center if the

projector displays

these symptoms.

See pages

61-62 for more

information.

Warning Indicator

When the warning indicators (see below) come on,

the projector will automatically shutdown:

 “LAMP” LED indicator is lit red and if “On/Standby” indicator

ashes amber.

 “TEMP” LED indicator is lit red and if “On/Standby”

indicator ashes amber. This indicates the projector has

overheated. Under normal conditions, the projector can be

switched back on.

 “TEMP” LED indicator ashes red and if “On/Standby”

indicator ashes amber.

Unplug the power cord from the projector, wait for 30 seconds

and try again. If the warning indicator light up again, please

contact your nearest service center for assistance.

Powering Off the Projector

1. Press the “ ” button on the remote control or

on the control panel to turn off the projector.

The following message will be displayed on the screen.

Press the “ ” button again to conrm otherwise the

message will disappear after 15 seconds. When you

press the “ ” button for the second time, the projector will

display countdown timer and will shut down.

2. The cooling fans continue to operate for about 10 seconds

for cooling cycle and the ON/STANDBY LED will Flash

Green. When the ON/STANDBY LED lights solid Amber,

the projector has entered standby mode.

If you wish to turn the projector back on, you must wait

until the projector has completed the cooling cycle and

has entered standby mode. Once in standby mode, simply

press “ ” button to restart the projector.

3. Disconnect the power cord from the electrical outlet and

the projector.

4. Do not turn on the projector immediately following a power

off procedure.

16

English

Installation

Adjusting the Projected Image

Adjusting the Projector’s Height

The projector is equipped with elevator feet for adjusting

the image height.

1. Locate the adjustable foot you wish to modify on the

underside of the projector.

2. Rotate the adjustable rings clockwise/anticlockwise to

lower or raise the projector. Repeat with the remaining feet

as needed.

Tilt-Adjustment Feet

Tilt-Adjustment Ring

17

English

Installation

Adjusting the Projector’s Zoom / Focus

You may turn the zoom lever to zoom in or out. To focus the

image, rotate the focus ring until the image is clear.



1.2x Zoom series will focus at distances from 4.92 to 32.81

feet (1.50 to 10.00 meters).

POWER

?

Focus Ring

Zoom Ring

Adjusting Projection Image Size

Hd

64.1"

(162.8cm)

83.3"

(211.6cm)

128.2"

(325.5cm)

205.1"

(520.8cm)

307.6"

(781.3cm)

46.1"

(117.2cm)

76.9"

(195.3cm)

100.0"

(253.9cm)

153.8"

(390.6cm)

246.1"

(625.0cm)

256.3"

(651.0cm)

38.4"

(97.7cm)

4.92'

(1.50m)

32.81'(10.00m)

26.25'(8.00m)

16.40'(5.00m)

10.66'(3.25m)

8.20'(2.50m)

Width

Height

Diagonal

 This table is for user’s reference only.

Screen

(Diagonal)

Max.

46.1” (117.2cm) 76.9” (195.3cm)100.0” (253.9cm)153.8” (390.6cm)246.1” (625.0cm)307.6” (781.3cm)

Min.

38.4” (97.7cm) 64.1” (162.8cm) 83.3” (211.6cm) 128.2” (325.5cm) 205.1” (520.8cm)256.3” (651.0cm)

Screen

Size

Max.

(WxH)

36.9” x 27.7”

93.8 x 70.3cm

61.5” x 46.1”

156.3 x 117.2cm

80.0” x 60.0”

203.1 x 152.3cm

123.0” x 92.3”

312.5 x 234.4cm

196.9” x 147.6”

500.0 x 375.0cm

246.1” x 184.5”

625.0 x 468.8cm

Min.

(WxH)

30.8” x 23.1”

78.1 x 58.6cm

51.3” x 38.4”

130.2 x 97.7cm

66.6” x 50.0”

169.3 x 127.0cm

102.5” x 76.9”

260.4 x 195.3cm

164.0” x 123.0”

416.7 x 312.5cm

205.1” x 153.8”

520.8 x 390.6cm

Hd

Max.

4.15” (10.55cm) 6.92” (17.58cm) 9.00” (22.85cm) 13.84” (35.16cm)22.15” (56.25cm)27.68” (70.31cm)

Min.

3.46” (8.79cm) 5.77” (14.65cm) 7.50” (19.04cm) 11.53” (29.3cm) 18.45” (46.88cm)23.07” (58.59cm)

Distance

4.92’ (1.50m) 8.20’ (2.50m) 10.66’ (3.25m) 16.40’ (5.00m) 26.25’ (8.00m) 32.81’ (10.00m)

18

English

User Controls

Control Panel

Control Panel & Remote Control

Using the Control Panel

Power

Refer to the “Power On/Off the Projector” section on

pages 14-15.

RE-SYNC

Automatically synchronize the projector to the input

source.

Enter

Con rm your item selection.

SOURCE

Press “SOURCE” to select an input signal.

Menu

Press “Menu” to launch the on-screen display

(OSD) menu. To exit OSD, Press “Menu” again.

?

HELP

Help Menu (refer to page 21).

Four Directional

Select Keys

Use to select items or make adjust-

ments to your selection.

Keystone

Use to adjust image distortion caused

by tilting the projector. (±40 degrees)

Lamp LED Indicate the projector’s lamp status.

Temp LED Indicate the projector’s temperature status.

ON/STANDBY LED Indicate the projector’s status.

POWER

?

19

English

User Controls

Remote Control

Using the Remote Control

Power

Refer to the “Power On/Off the Projector”

section on pages 14-15.

Laser

Press to use laser pointer.

L Button

Mouse left click.

R Button

Mouse right click.

Page +

Use this button to page up.

Page -

Use this button to page down.

Enter/Help

Con rm your item selection.

? Help Menu (refer to page 21).

Source

Press “Source” to select an input signal.

Re-SYNC

Automatically synchronizes the projector to

the input source.

Four Directional

Select Keys

Use to select items or make

adjustments to your selection.

Keystone +/-

Adjust image distortion caused by tilting the

projector.

Volume +/-

Adjust to increase / decrease the volume.

Brightness

Adjust the brightness of the image.

Menu

Press “Menu” to launch the on-screen

display (OSD) menu. To exit OSD, press

“Menu” again.

ZOOM

Zoom in on an image.

Press buttons to alter zoom.

/?

20

English

User Controls

Remote Control

Using the Remote Control

HDMI

Press “HDMI” to choose HDMI source.

Freeze

Press “Freeze” to pause the screen image.

Press this button again to unlock.

AV mute

Momentarily turns off/on the audio and

video.

S-Video Press “S-Video” to choose S-Video source.

VGA

Press “VGA” to choose VGA sources.

Video

Press “Video” to choose Composite video

source.

/?

Page is loading ...

Optoma Optoma EX615 User manual

This manual is also suitable for

Optoma Optoma EX615 User manual

Related papers

Other documents