Sanyo PID-42NE1 Operating instructions

Brand: Sanyo

Model: PID-42NE1

Category: LED displays

Type: Operating instructions

This manual is also suitable for

PID-47NE1

English

Please read these instructions before operating your set

and retain them for future reference.

Operating Instructions

FULL HD LCD Display

PID-42NE1

PID-47NE1

Trademark Credits

• VGAisatrademarkofInternationalBusinessMachinesCorporation.

• MacintoshisaregisteredtrademarkofAppleInc.,USA.

• SVGA,XGA,SXGAandUXGAareregisteredtrademarksoftheVideoElectronicsStandardAssociation.

Evenifnospecialnotationhasbeenmadeofcompanyorproducttrademarks,thesetrademarkshavebeenfullyrespected.

• HDMI,theHDMILogo,andHigh-DenitionMultimediaInterfacearetrademarksorregisteredtrademarksofHDMI

LicensingLLCintheUnitedStatesandothercountries.

Note:

Imageretentionmayoccur.Ifyoudisplayastillpictureforanextendedperiod,theimagemightremainonthescreen.

However,itwilldisappearafterawhile.

Table of Contents

Important Safety Notice ........................................... 3

Safety Precautions ................................................... 4

Accessories .............................................................. 7

AccessoriesSupply ................................................. 7

RemoteControlBatteries ........................................ 7

Connections .............................................................. 8

ACcordconnectionandxing,cablexing ............. 8

Videoequipmentconnection ................................... 8

VIDEOandCOMPONENT/RGBINconnection .... 9

HDMIconnection ................................................... 10

DVI-DINconnection .............................................. 10

PCInputTerminalsconnection ...............................11

SERIALTerminalsconnection ............................... 12

Power On / Off ......................................................... 13

Selecting the input signal ...................................... 15

Basic Controls ........................................................ 16

ASPECT Controls ................................................... 18

Digital Zoom ............................................................ 19

On-Screen Menu Displays ..................................... 20

Adjusting Pos. /Size ............................................... 22

Picture Adjustments ............................................... 24

Advancedsettings ................................................. 25

Sound Adjustment .................................................. 26

PRESENT TIME Setup / Set up TIMER .................. 27

PRESENTTIMESetup .......................................... 27

SetupTIMER ........................................................ 28

Screensaver (For preventing image retention) .... 29

SetupofScreensaverTime ................................... 30

Wobbling ................................................................. 30

Reduces power consumption ............................... 31

Customizing the Input labels ................................. 32

Selecting the On-Screen Menu Language ............ 33

Customizing the On-Screen Menu Display .......... 33

Setup for MULTI DISPLAY ...................................... 34

HowtoSetupMULTIDISPLAY ............................. 34

Setup for Input Signals .......................................... 36

Component/RGB-inselect ................................... 36

Signalmenu .......................................................... 37

3DY/CFilter .......................................................... 37

Coloursystem ....................................................... 38

Cinemareality ....................................................... 38

XGAMode ............................................................. 38

Noisereduction ..................................................... 39

Sync ...................................................................... 39

Inputsignaldisplay ................................................ 40

Options Adjustments ............................................. 41

Troubleshooting ..................................................... 43

Applicable Input Signals ........................................ 44

Shipping condition ................................................. 45

Specications ......................................................... 46

Important Safety Notice

WARNING

1) Topreventdamagewhichmayresultinreorshockhazard,donotexposethisappliancetodripping

or splashing.

 Donotplacecontainerswithwater(owervase,cups,cosmetics,etc.)abovetheset.(includingon

shelvesabove,etc.)

 Nonakedamesources,suchaslightedcandles,shouldbeplacedon/abovetheset.

2) Topreventelectricshock,donotremovecover.Nouserserviceablepartsinside.Referservicingtoqualied

servicepersonnel.

3) Donotremovetheearthingpinonthepowerplug.Thisapparatusisequippedwithathreepinearthing-type

powerplug.Thisplugwillonlytanearthing-typepoweroutlet.Thisisasafetyfeature.Ifyouareunableto

inserttheplugintotheoutlet,contactanelectrician.

 Donotdefeatthepurposeoftheearthingplug.

4) Topreventelectricshock,ensuretheearthingpinontheACcordpowerplugissecurelyconnected.

CAUTION

Thisapplianceisintendedforuseinenvironmentswhicharerelativelyfreeofelectromagneticelds.

Usingthisappliancenearsourcesofstrongelectromagneticeldsorwhereelectricalnoisemayoverlapwiththe

inputsignalscouldcausethepictureandsoundtowobbleorcauseinterferencesuchasnoisetoappear.

Toavoidthepossibilityofharmtothisappliance,keepitawayfromsourcesofstrongelectromagneticelds.

IMPORTANT: THE MOULDED PLUG

FORYOURSAFETY,PLEASEREADTHEFOLLOWINGTEXTCAREFULLY.

Thisdisplayissuppliedwithamouldedthreepinmainsplugforyoursafetyandconvenience.A10ampfuseis

ttedinthisplug.Shallthefuseneedtobereplaced,pleaseensurethatthereplacementfusehasaratingof10

ampsandthatitisapprovedbyASTAorBSItoBS1362.

CheckfortheASTAmark

ASA

ortheBSImark on the body of the fuse.

Iftheplugcontainsaremovablefusecover,youmustensurethatitisrettedwhenthefuseisreplaced.

Ifyoulosethefusecovertheplugmustnotbeuseduntilareplacementcoverisobtained.

Areplacementfusecovercanbepurchasedfromyourlocaldealer.

Donotcutoffthemainsplug.

Donotuseanyothertypeofmainsleadexcepttheonesuppliedwiththisdisplay.

Thesuppliedmainsleadandmouldedplugaredesignedtobeusedwiththisdisplaytoavoid

interference and for your safety.

Ifthesocketoutletinyourhomeisnotsuitable,getitchangedbyaqualiedelectrician.

Iftheplugormainsleadbecomesdamaged,purchaseareplacementfromanauthorizeddealer.

WARNING : — THIS DISPLAY MUST BE EARTHED.

Howtoreplacethefuse.

Openthefusecompartmentwithascrewdriverandreplacethefuse.

Safety Precautions

Alwaysbesuretoaskaqualiedtechniciantocarryoutset-up.

Smallpartscanpresentchokinghazardifaccidentallyswallowed.Keepsmallpartsawayfromyoungchildren.Discard

unneededsmallpartsandotherobjects,includingpackagingmaterialsandplasticbags/sheetstopreventthemfrom

beingplayedwithbyyoungchildren,creatingthepotentialriskofsuffocation.

Do not place the Display on sloped or unstable surfaces.

•TheDisplaymayfalloffortipover.

Do not place any objects on top of the Display.

•IfwaterisspillsontotheDisplayorforeignobjectsgetinsideit,ashort-circuitmayoccurwhichcouldresultinre

orelectricshock.IfanyforeignobjectsgetinsidetheDisplay,pleaseconsultyourlocaldealer.

Transport only in upright position!

•Transporting the unit with its display panel facing upright or downward may cause damage to the internal

circuitry.

Ventilationshouldnotbeimpededbycoveringtheventilationopeningswithitemssuchasnewspapers,table

cloths and curtains.

Forsufcientventilation;

Leaveaspaceof10cmormoreatthetop,leftandright,and5cmormoreattherear,andalsokeepthespace

betweenthebottomofthedisplayandtheoorsurface.

Cautions for Wall Installation

•Wallinstallationshouldbeperformedbyaninstallationprofessional.InstallingtheDisplayincorrectlymayleadto

anaccidentthatresultsindeathorseriousinjury.Furthermore,wheninstallingonawall,awallhangingbracket

thatconformstoVESAstandards(VESA400×400)mustbeused.

•WheninstallingtheDisplayvertically,besuretoinstallthepowerswitchontothebottomoftheDisplay.

WARNING

Setup

This LCD Display is for use only with the following optional accessories. Use with any other type of optional

accessories may cause instability which could result in the possibility of injury.

•Pedestal ....................................................... KA-TD-47NE1

Safety Precautions

When using the LCD Display

TheDisplayisdesignedtooperateon220-240VAC,50/60Hz.

Do not cover the ventilation holes.

•DoingsomaycausetheDisplaytooverheat,whichcancausereordamagetotheDisplay.

Do not stick any foreign objects into the Display.

•DonotinsertanymetalorammableobjectsintotheventilationsholesordropthemontotheDisplay,asdoingso

cancausereorelectricshock.

Do not remove the cover or modify it in any way.

•HighvoltageswhichcancausesevereelectricshocksarepresentinsidetheDisplay.Foranyinspection,adjustment

andrepairwork,pleasecontactyourlocaldealer.

Ensure that the mains plug is easily accessible.

An apparatus with CLASS I construction shall be connected to a mains socket outlet with a protective earthing connection.

Do not use any power supply cord other than that provided with this unit.

•Doingsomaycausereorelectricshocks.

Securely insert the power supply plug as far as it will go.

•Iftheplugisnotfullyinserted,heatmaybegeneratedwhichcouldcausere.Iftheplugisdamagedorthewall

socketisloose,theyshallnotbeused.

Do not handle the power supply plug with wet hands.

•Doingsomaycauseelectricshocks.

Donotdoanythingthatmaydamagethepowercable.Whendisconnectingthepowercable,pullontheplugbody,notthecable.

•Donotdamagethecable,makeanymodicationstoit,placeheavyobjectsontopofit,heatit,placeitnearany

hotobjects,twistit,benditexcessivelyorpullit.Todosomaycausereandelectricshock.Ifthepowercableis

damaged,haveitrepairedatyourlocaldealer.

IftheDisplayisnotgoingtobeusedforanyprolongedlengthoftime,unplugthepowersupplyplugfrom

the wall outlet.

Topreventthespreadofre,keepcandlesorotheropenamesawayfromthisproductatalltimes.

If problems occur during use

Ifaproblemoccurs(suchasnopictureornosound),orifsmokeoranabnormalodourstartstocomeout

fromtheDisplay,immediatelyunplugthepowersupplyplugfromthewalloutlet.

•IfyoucontinuetousetheDisplayinthiscondition,reorelectricshockcouldresult.Aftercheckingthatthesmoke

hasstopped,contactyourlocaldealersothatthenecessaryrepairscanbemade.RepairingtheDisplayyourself

isextremelydangerous,andshallneverbedone.

IfwaterorforeignobjectsgetinsidetheDisplay,iftheDisplayisdropped,orifthecabinetbecomesdamages,

disconnect the power supply plug immediately.

•

Ashortcircuitmayoccur,whichcouldcausere.Contactyourlocaldealerforanyrepairsthatneedtobemade.

Safety Precautions

CAUTION

When using the LCD Display

Donotbringyourhands,faceorobjectsclosetotheventilationholesoftheDisplay.

•HeatedaircomesoutfromtheventilationholesatthetopofDisplaywillbehot.Donotbringyourhandsorface,

orobjectswhichcannotwithstandheat,closetothisport,otherwiseburnsordeformationcouldresult.

Be sure to disconnect all cables before moving the Display.

•IftheDisplayismovedwhilesomeofthecablesarestillconnected,thecablesmaybecomedamaged,andreor

electricshockcouldresult.

Disconnect the power supply plug from the wall socket as a safety precaution before carrying out any

cleaning.

•Electricshockscanresultifthisisnotdone.

Clean the power cable regularly to prevent it becoming dusty.

•Ifdustbuiltuponthepowercordplug,theresultanthumiditycandamagetheinsulation,whichcouldresultinre.

Pullthepowercordplugoutfromthewalloutletandwipethemainsleadwithadrycloth.

Do not burn or breakup batteries.

•Batteriesmustnotbeexposedtoexcessiveheatsuchassunshine,reorthelike.

Cleaning and maintenance

The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning

clothorasoft,lint-freecloth.

•Ifthesurfaceisparticularlydirty,wipewithasoft,lint-freeclothwhichhasbeensoakedinpurewaterorwaterin

whichneutraldetergenthasbeendiluted100times,andthenwipeitevenlywithadryclothofthesametypeuntil

the surface is dry.

•Donotscratchorhitthesurfaceofthepanelwithngernailsorotherhardobjects,otherwisethesurfacemay

becomedamaged.Furthermore,avoidcontactwithvolatilesubstancessuchasinsectsprays,solventsandthinner,

otherwisethequalityofthesurfacemaybeadverselyaffected.

Ifthecabinetbecomesdirty,wipeitwithasoft,drycloth.

•Ifthecabinetisparticularlydirty,soaktheclothinwatertowhichasmallamountofneutraldetergenthasbeen

addedandthenwringtheclothdry.Usethisclothtowipethecabinet,andthenwipeitdrywithadrycloth.

•DonotallowanydetergenttocomeintodirectcontactwiththesurfaceoftheDisplay.Ifwaterdropletsgetinside

theunit,operatingproblemsmayresult.

•Avoidcontactwithvolatilesubstancessuchasinsectsprays,solventsandthinner,otherwisethequalityofthe

cabinetsurfacemaybeadverselyaffectedorthecoatingmaypeeloff.Furthermore,donotleaveitforlongperiods

incontactwitharticlesmadefromrubberorPVC.

Accessories

Helpful Hint:

Forfrequentremotecontrolusers,replaceoldbatterieswithAlkaline

batteries for longer life.

Precaution on battery use

Incorrectinstallationcancausebatteryleakageandcorrosionthatwilldamagetheremotecontroltransmitter.

Disposalofbatteriesshouldbeinanenvironment-friendlymanner.

Observe the following precaution:

1.Batteriesshallalwaysbereplacedasapair.Alwaysusenewbatterieswhenreplacingtheoldset.

2.Donotcombineausedbatterywithanewone.

3.Donotmixbatterytypes(example:“ZincCarbon”with“Alkaline”).

4.Donotattempttocharge,short-circuit,disassemble,heatorburnusedbatteries.

BatteryreplacementisnecessarywhenremotecontrolactssporadicallyorstopsoperatingtheDisplayset.

6.Donotburnorbreakupbatteries.

  Batteriesmustnotbeexposedtoexcessiveheatsuchassunshine,reorthelike.

Remote Control Batteries

Requires two R6 batteries.

1.Pullandholdthehook,thenopen

thebatterycover.

2.Insertbatteries-notecorrect

polarity(+and-).

3.Replacethecover.

“R6(UM3)”size

BatteriesfortheRemote

ControlTransmitter

(R6(UM3)Size×2)

Remote Control

Transmitter

OperatingInstructionbook CD-ROM

(Operating

instructions)

Powersupplycord

Check that you have the accessories and items shown

Accessories Supply

Connections

Video equipment connection

Plug the AC cord into the display unit.

PlugtheACcorduntilitclicks.

Note:

MakesurethattheACcordislockedon

both the left and right sides.

ACcordxing

Unplug the AC cord

Unplug theAC cord pressing the

twoknobs.

Note:

WhendisconnectingtheACcord,be

absolutelysuretodisconnecttheAC

cordplugatthesocketoutletrst.

Cablexing

Fixthecableinplaceusingthebeadbandattachedtothedisplay.

1 2 3

Removethebeadband

Bundlethecables

Attachthebeadband

Beadband

Remove

Bundlethecables

Stopper

Pass through to

theback

AV IN

  HDMI1,HDMI2

  HDMIInputTerminal

  (seepage10)

COMPONENT/RGB IN

Component/RGBVideo

InputTerminal

(seepage9)

DVI-D IN

DVI-DInputTerminal

(seepage10)

SERIAL

ControltheDisplayby

connectingtoPC

(seepage12)

PC IN

PCInputTerminal

(seepage11).

AV IN

VIDEO

CompositeVideoInputTerminal

S-VIDEO

S-VIDEOInputTerminal

  (seepage9)

ACcordconnectionandxing,cablexing

AUDIO OUT

AUDIO OUT RGB OUT

Y P

B PR OUT

VIDEO OUTS VIDEO OUT

Notes:

• Change the “Component/RGB-in select” setting in the “Setup”

menuto“Component”(whenComponentsignalconnection)or

“RGB”(whenRGBsignalconnection).(seepage36)

• AcceptsonlyRGBsignalswith“SynconG”.

RCA-BNC

Adapterplug

RCA-BNC

Adapterplug

DVDPlayer

VCR

Computer RGBCamcorder

VIDEO and COMPONENT / RGB IN connection

Note:

Additionalequipment,cablesandadapterplugsshownarenotsuppliedwiththisset.

SVideoInputTerminal

Luminance

Signal

ColorSignal

Earth(ColorSignal)

Earth(LuminanceSignal)

Connections

HDMI connection

DVI-D IN connection

[Pin assignments and signal names]

Note:

AdditionalequipmentandHDMIcableshownarenotsuppliedwiththisset.

Pin No.

Signal Name

Pin No.

Signal Name

T.M.D.SData2+

T.M.D.SClock

Shield

T.M.D.SData2

Shield

T.M.D.SClock-

T.M.D.SData2-

CEC

T.M.D.SData1+

Reserved

(N.C.ondevice)

T.M.D.SData1

Shield

T.M.D.SData1-

SCL

T.M.D.SData0+

SDA

T.M.D.SData0

Shield

DDC/CEC

Ground

T.M.D.SData0-

+5VPower

T.M.D.SClock+

HotPlugDetect

Pin No.

Signal Name

Pin No.

Signal Name

T.M.D.S.data2-

T.M.D.S.data2+

+5VDC

T.M.D.S.data2shield

Ground

Hotplugdetect

T.M.D.S.data0-

DDCclock

T.M.D.S.data0+

DDCdata

T.M.D.S.data0shield

T.M.D.S.data1-

T.M.D.S.data1+

T.M.D.S.clockshield

T.M.D.S.data1shield

T.M.D.S.clock+

12 24

T.M.D.S.clock-

Notes:

• Additionalequipmentandcablesshownarenotsuppliedwiththisset.

• UsetheDVI-DcablewithFerritecorecomplyingwiththeDVIstandard.Imagedeteriorationmayoccurdepending

onthelengthorthequalityofthecable.

DVI-D Input Connector

Pin Layouts

Connectionportview

Connections

HDMI

AV OUT

HDMI

AV OUT

DVDplayerDVDplayer

HDMIcables

DVI-videocablewithFerritecore(Within5m)

Stereominiplug(M3)

PCwithDVI-D

videoout

Sharedwith

PCIN.

Notes:

• Computersignalswhichcanbeinputarethosewithahorizontalscanningfrequencyof30to110kHzandverticalscanning

frequencyof48to120Hz.(However,theimagewillnotbedisplayedproperlyifthesignalsexceed1,200lines.)

• Thedisplayresolutionisamaximumof1,440×1,080dotswhentheaspectmodeissetto“4:3”,and1,920×1,080

dotswhentheaspectmodeissetto“16:9”.Ifthedisplayresolutionexceedsthesemaximums,itmaynotbepossible

toshownedetailwithsufcientclarity.

• ThePCinputterminalsareDDC2B-compatible.IfthecomputerbeingconnectedisnotDDC2B-compatible,youwill

needtomakesettingchangestothecomputeratthetimeofconnection.

• SomePCmodelscannotbeconnectedtotheset.

• ThereisnoneedtouseanadapterforcomputerswithDOS/VcompatibleMiniD-sub15Pterminal.

• Thecomputershownintheillustrationisforexamplepurposesonly.

• Additionalequipmentandcablesshownarenotsuppliedwiththisset.

• SanyorecommendsusingaPCcablethatincludesaFerritecore.

• DonotsetthehorizontalandverticalscanningfrequenciesforPCsignalswhichareaboveorbelowthespecied

frequencyrange.

• ComponentInputispossiblewiththepin1,2,3oftheMiniD-sub15PConnector.

• TousesyncinputVBSsignals,usetheconnectorwhichincorporatesa75-ohmterminationresistanceandwhichis

availableonthemarket,fortheconnectionoftheHDconnectorwheretheVBSsignalsaretobeinput.

Signal Names for Mini D-sub 15P Connector

PinLayoutforPCInput

Terminal

PC Input Terminals connection

PinNo. SignalName PinNo. SignalName PinNo. SignalName

GND(Ground)

NC(notconnected)

GND(Ground)

SDA

GND(Ground)

HD/SYNC

NC(notconnected)

+5VDC

GND(Ground)

SCL

Conversionadapter

(ifnecessary)

MiniD-sub15p

RGB

PCcablewith

Ferritecore

Stereominiplug(M3)

Audio

Connectacablewhichmatches

the audio output terminal on the computer.

(Male)

(Female)

COMPUTER

6 7 8

4 5

15 14 13 12 11

Connections

SharedwithDVI-DIN.

6 7 8 9

1 3 4 5 2

COMPUTER

RS-232Crosscable(soldseparately)

D-sub9p

(Male)

(Female)

SERIAL Terminals connection

Notes:

• SetupthecomputertobeconnectedandthecommunicationRS-232crosscablethatconnectstheSERIALterminal

withthecomputer.

• Thecomputershownisforexamplepurposesonly.

• Additionalequipmentandcablesshownarenotsuppliedwiththisset.

TheSERIALterminalconformstotheRS-232Cinterface

specication, so that the Display can be controlled by a

computerwhichisconnectedtothisterminal.

The computer will require software which allows the

sending and receiving of control data which satisfies

the conditions given below. Use a computer application

such as programming language software. Refer to the

documentation for the computer application for details.

TheSERIALterminalisusedwhentheDisplayiscontrolledbyacomputer.

PinlayoutforSERIALTerminal

Basic format for control data

Add parameters as necessary depending on the control

content.

Commandsshallbe1command/1linethatstartwith“C”

andendwiththecarriagereturn(0x0D).

A spaceis enteredbetween thecommand “CF”and the

control instruction.

A space is entered between the command and the

parameter.

Ex)CF_POWER_ON[CR]

_:space

Notes:

• Ifacorrectcommandissent,thisunitwillsenda“000”

command to the computer.

•

Ifanincorrectcommandissentbymistake,thisunitwillsend

adifferentcommandapartfrom“000”tothecomputer.

• Whilethepowerisin“stand-by”mode(powerturnedoff

withremotecontrol),alloperationsexcept“CFPOWER

ON”willnotrespond.

Communication parameters

Signallevel RS-232Ccompliant

Synchronizationmethod Asynchronous

Baudrate 9600 bps

Parity None

Characterlength 8 bits

Stopbit 1 bit

Flowcontrol -

Signal names for D-sub 9P connector

PinNo. Details

RXD

TXD

GND

•

Nonuse

(Shortedinthisset)

•

Thesesignalnamesarethoseofcomputerspecications.

Connections

Command

Command Parameter Controldetails

CFPOWER

ON PowerON

OFF PowerOFF

CFVOLUME

000-100*3digits

Directlyassignsvolumelevel

UP Currentvolumelevel+1

DN Currentvolumelevel-1

CFMUTE

UP Toggletoselect

ON AudioMUTEON

OFF AudioMUTEOFF

CFINPUT

Toggletoselectbetween:

AV1-->AV2-->PC-->DVI-->

HDMI1-->HDMI2-->AV1-->…

AV1 VIDEOinput

AV2 Component/RGBinput

AV2YPBPR Componentinput

AV2RGB RGBinput

PC PCinput

DVI DVIinput

HDMI1 HDMI1input

HDMI2 HDMI2input

CFSCREEN UP Toggletoselectbetween:

FULL-->NORMAL-->ZOOM1-->

ZOOM2-->FULL-->…

FULL Fullscreen

NORMAL Normalscreen

ZOOM Zoom1

ZOOM2 Zoom2

Withthepoweroff,thisdisplayrespondstoPONcommandonly.

PowerIndicator

RemoteControlSensor

Powerswitch

Power On / Off

Press the buttonontheremotecontroltoturntheDisplayoff.

PowerIndicator:Red(standby)

Press the buttonontheremotecontroltoturntheDisplayon.

PowerIndicator:Green

TurnthepowertotheDisplayoffbypressingthe switchontheunit,when

theDisplayisonorinstandbymode.

Note:

Duringoperationofthepowermanagementfunction,thepowerindicatorturns

orangeinthepoweroffstate.

Connecting the plug to the Wall Outlet

Notes:

• Mainplugtypesvarybetweencountries.Thepower

plugshownatrightmay,therefore,notbethetype

ttedtoyourset.

• When disconnecting theAC cord, be absolutely

suretodisconnecttheACcordplugatthesocket

outletrst.

PressthePowerswitchon theDisplay toturn the

seton:Power-On.

PowerIndicator:Green

Connecting the AC cord plug to the Display.

16:9

Italiano

Español

ENGLISH (US)

English (UK)

Deutsch

Français

OSD Language

SetSelect

PRESENT TIME Setup

PRESENT TIME MON 99 : 99

Set

PRESENT TIME

99 : 99

DAY

MON

PRESENT TIME Setup

PRESENT TIME MON 99 : 99

Set

PRESENT TIME

10 : 00

DAY

TUE

Fromthesecondtimeon,thebelowscreenisdisplayedforawhile(settingconditionisanexample).

Power On / Off

Whenrstswitchingontheunit

Followingscreenwillbedisplayedwhentheunitisturnedonforthersttime.

Selecttheitemswiththeremotecontrol.Unitbuttonsareinvalid.

OSD Language

PRESENT TIME Setup

Selectthelanguage.

Set.

Select“DAY”or“PRESENTTIME”.

Setup“DAY”or“PRESENTTIME”.

Notes:

• Oncetheitemsareset,thescreenswon'tbedisplayedwhenswitchingontheunitnexttime.

• Afterthesetting,theitemscanbechangedinthefollowingmenus.

 OSDLanguage(seepage33)

 PRESENTTIMESetup(seepage27)

Select“Set”.

Set.

Selecting the input signal

Notes:

• SelectingisalsopossiblebypressingtheINPUTbuttononthe

unit.

• Selecttomatchthesignalsfromthesourceconnectedtothe

component/RGBinputterminals.(seepage36)

Presstoselecttheinputsignaltobeplayedbackfromtheequipmentwhichhas

beenconnectedtotheDisplay.

Inputsignalswillchangeasfollows:

PC:PCinputterminalinPCIN.

DVI:DVIinputterminalinDVI-DIN.

HDMI1:HDMIinputterminalinAVIN(HDMI1).

HDMI2:HDMIinputterminalinAVIN(HDMI2).

VIDEO:VideoinputterminalinAVIN(VIDEO/S-VIDEO).

Component*:ComponentorRGBinputterminalinCOMPONENT/RGBIN.

*“Component”maybedisplayedas“RGB”dependingonthesettingof

“Component/RGB-inselect”.(seepage36)

PC HDMI1 HDMI2 Component*

VIDEODVI

Basic Controls

MENU Screen ON / OFF

EachtimetheMENUbuttonispressed,themenuscreen

willswitch.(seepage20)

Volume Adjustment

VolumeUp“+”Down“–”

Whenthemenuscreenisdisplayed:

“+”:presstomovethecursorup

“–”:

presstomovethecursordown

(seepage20)

Remote control

sensor

Main Power On / Off Switch

Speakers

Brightness Sensor

Detectsthebrightnessintheviewing

environment.

Main Unit

Power Indicator

ThePowerIndicatorwilllight.

•Power-OFF .... Indicatornotilluminated(Theunit

willstillconsumesomepower

aslongasthepowercordisstill

insertedintothewalloutlet.)

•Standby ........ Red

•Power-ON ...... Green

•Powermanagement(DPMS)

.......................Orange(PCINorDVI-DIN

signal.Seepage31)

Enter / Aspect button

(seepage18,20)

INPUT button

(INPUT signal selection)

(seepage15)

NormalViewing Picture

Sound Pos./Size

Setup

Off timer

10:00

4:3

Basic Controls

Remote Control Transmitter

Standby (ON / OFF) button

TheDisplaymustrstbepluggedinto

the wall outlet and turned on at the

powerswitch(seepage13).

PressthisbuttontoturntheDisplayOn,

fromStandbymode.Pressitagainto

turntheDisplayOfftoStandbymode.

ACTION button

Presstomakeselections.

ASPECT button

Press to adjust the aspect.

(seepage18)

Sound mute On / Off

Press this button to mute the

sound.

Pressagaintoreactivatesound.

Sound is also reactivated when

poweristurnedofforvolumelevel

is changed.

Digital Zoom(seepage19)

OFF TIMER button

TheDisplaycanbepresettoswitchtostand-by

afteraxedperiod.Thesettingchangesto30

minutes,60minutes,90minutesand0minutes

(off timer cancelled) each time the button is

pressed.

30 60

When three minutes remain, “Off timer 3” will

ash.

Theofftimeriscancelledifapowerinterruption

occurs.

RECALL button

Pressthe“RECALL”buttontodisplay

the current system status.

Inputlabel

Aspectmode(seepage18)

Offtimer

 The off timer indicator is

displayed only when the off

timer has been set.

Clockdisplay(seepage42)

AUTO SETUP button

Automaticallyadjuststheposition/

sizeofthescreen.(seepage22)

N button

(seepage23,24,25,26)

POSITION buttons

PICTURE button

(seepage24)

INPUT button

PresstoselectInputsignal

sequentially.(seepage15)

POS. /SIZE button

(seepage22)

Volume Adjustment

PresstheVolumeUp“+”orDown“–”

button to increase or decrease the

soundvolumelevel.

R button(seepage20)

PresstheRbuttontoreturntoprevious

menu screen.

SET UP button(seepage20)

SOUND button(seepage26)

TheaspectmodechangeseachtimetheENTERbuttonispressed.

ASPECT Controls

TheDisplaywillallowyoutoenjoyviewingthepictureatitsmaximumsize,includingwidescreencinemaformat

picture.

[from the unit]

Pressrepeatedlytomovethroughtheaspectoptions:

4:3 Zoom1 16:9Zoom2

Note:

Theaspectmodeismemorizedseparatelyforeachinputterminal.

Aspect mode

Picture

Enlarged screen

Description

16:9

Thedisplayofthepicturesllsthescreen.

InthecaseofSDsignals,pictureswitha4:3aspectratioare

enlargedhorizontally,anddisplayed.Thismodeissuitedto

displayinganamorphicpictureswitha16:9aspectratio.

4:3

Pictures with a 4:3 aspect ratio are displayed with their

originalaspectratio.Sidepanelsaredisplayedattheleft

and right edges of the screen.

Thepictureswitha4:3aspectratioamongthe16:9aspect

ratiosignalsaredisplayedwith theiroriginalaspectratio.

The left andright edges of the picturesare masked with

side panels.

Zoom1

Letterbox pictures with a 16:9 aspect ratio are enlarged

verticallyandhorizontallysothattheirdisplayllsthescreen.

Thetopandbottomedgesofthepicturesarecutoff.

Zoom2

Letterbox pictures with a 16:9 aspect ratio are enlarged

verticallyandhorizontallysothattheirdisplayllsthescreen.

Thetopandbottomedgesaswellastheleftandrightedges

of the pictures are cut off.

Note:

Beawarethatifyouputthedisplayinapublicplaceforcommercialpurposesorapublicshowing

andthenusetheaspectmodeselectfunctiontoshrinkorexpandthepicture,youmaybeviolating

thecopyrightundercopyrightlaw.Itisprohibitedtoshoworalterthecopyrightedmaterialsofother

peopleforcommercialpurposeswithoutthepriorpermissionofthecopyrightholder.

× 1 × 2 × 3 × 4

Exit

Digital Zoom

Thisdisplaysanenlargementofthedesignatedpartofthedisplayedimage.

Display the operation guide.

PresstoaccessDigitalZoom.

Theoperationguidewillbedisplayed.

Select the area of the image to be enlarged.

Press on the enlargement location to select.

Selectthemagnicationrequiredfortheenlargeddisplay.

Eachtimethisispressed,themagnicationfactorchanges.

Thisisshownintheimagebeingdisplayed.

Return to normal display (quit Digital Zoom).

PresstoexitfromtheDigitalZoom.

Thecursorwillmove.

Notes:

• WhenpowergoesOFF(including“OffTimer”operation),DigitalZoomterminates.

• TheDigitalZoomfunctioncannotbeselectedwhileinthefollowingoperationstate:

 WhenMULTIDISPLAYSetupisOn(seepage34).

 WhenScreensaverisrunning(seepage29)

• WhileDigitalZoomisinoperation,“AdjustingPos./Size”cannotbeused.

[Remote control]

POSITION/

ACTIONbutton

DuringDigitalZoom,onlythefollowingbuttonscanbeoperated.

On-Screen Menu Displays

Remote Control Unit

Display the menu screen.

Press to select.

(Example:Picturemenu)

Pressseveraltimes.

Each time the MENU button is pressed, the

menuscreenwillswitch.

NormalViewing Picture

Sound Pos./Size

Setup

Select the item.

100

Picture

Normal

Normalise

Normal

Brightness

Picture Mode

Colour

Contrast

Backlight

Tint

Advanced settings

MEMORY SAVE

White balance

Normal

MEMORY LOAD

MEMORY EDIT

Sharpness

(Example:Picturemenu)

Select.

Press.

Select.

Set.

Adjust.

Press.

Adjust.

Exitthemenu.

Press.

Press

to return to the

previousmenu.

Pressseveraltimes.

Page is loading ...

Sanyo PID-42NE1 Operating instructions

Brand: Sanyo

Model: PID-42NE1

Category: LED displays

Type: Operating instructions

This manual is also suitable for

PID-47NE1

Download PDF

report

Sanyo PID-42NE1 Operating instructions

This manual is also suitable for

Sanyo PID-42NE1 Operating instructions

Related papers

Other documents