Blueant Sense Quick start guide
- Category
- Headphones
- Type
- Quick start guide
SENSE: QUICK START GUIDE
Read Me to Get Started Quickly...
1. Charge your SENSE until the battery
indicator light goes out (a full charge takes
2.5-3 hours).
2. Slide the power switch to the ON position.
3. The first time you use the SENSE it will ask
you to choose your language. Tap the
BlueAnt
symbol when you hear your language.
4. The SENSE will now go into pair mode.
Follow the instructions to pair your phone.
LET’S GET STARTED...
PAIR CODE: 0000
Once pairing is complete your SENSE will
transfer the contacts from your phonebook
so that it can announce caller names.
If your phone prompts you to allow the
connection to the “BlueAnt S3”, you must
select “YES” or “OK”:
CALLER NAME ANNOUNCE
Accept connection
request from BlueAnt S3?
YES
NO
Don’t ask this again
Phonebook Access Request
swipe over the
message and
accept the request
BlackBerry devices—
select “Don’t ask this
again”, then “YES”:
Android devices—a
notification appears at
the top of the screen:
Tip: For subsequent pairings, hold down
BlueAnt
for about 6 seconds to enter pair mode.
Volume
Controls
Battery
Indicator
On/Off
Switch
Charge Port
Microphone
Multi-Function
Button (the
BlueAnt
symbol)
Speaker
VOICE DIALING
Tap the
BlueAnt
symbol to activate your phone’s
voice dial feature. Your phone must support
“voice dialing over Bluetooth”.
This feature is supported by the iPhone 3GS
(iOS 3.1+) and iPhone 4, most BlackBerry
smartphones, and most Android devices
running Android 2.2 and above.
Once you have activated the voice dial
feature, you are using your phone’s voice
recognition software. Check your phone
manual for help on getting the most out of
this feature and to find out what commands
your phone supports, as well as any
limitations of your phone’s voice recognition.
1. Slide the clip onto the back of the SENSE
until it clicks into place.
2. Slide the SENSE and clip onto your car
sun visor.
INSTALLING IN YOUR CAR
“HOW-TO VIDEOS FOR YOUR BLUEANT DEVICE”
NEED MORE HELP?
www.blueantwireless.com/geekspeak
Version: SENSE-QSG-EN-2.0
-
1
-
2
-
3
-
4
Blueant Sense Quick start guide
- Category
- Headphones
- Type
- Quick start guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI