Epson ET-4750 User manual

Brand: Epson

Model: ET-4750

Category: Print & Scan

Type: User manual

This manual is also suitable for

Start Here

Read these instructions before using your product.

The illustrations show the ET-4750, but the steps are the same for

all models, unless otherwise speciﬁed.

Note for Spanish speakers/Nota para hispanohablantes: Para

obtener instrucciones de conﬁguración en español, consulte la Guía de

instalación en www.epson.com/support/et3750sp o www.epson.com/

support/et4750sp (requiere una conexión a Internet).

Unpack

Note: Do not open the ink bottles until you are ready to ﬁll the ink

tanks. The ink bottles are vacuum packed to maintain reliability.

1 Remove all protective materials from the product.

2 Lift up the scanner unit. Remove all protective materials

from inside the product.

Caution: Do not touch the ﬂat white cable or the ink tubes and

their translucent cover.

Fill ink tanks

Note: This product requires careful handling of ink. If ink spills, wipe it

off immediately with a damp towel to avoid permanent stains. If ink gets

on your clothes or belongings, it may not come off.

Warning: Keep the ink bottles out of the reach of children and do not

drink the ink.

1 Open the ink tank cover, then open the cap for the ink tank

you are going to ﬁll.

2 Unpack one of the ink bottles. Hold the ink bottle upright

and slowly turn the bottle cap to remove it.

Caution: Do not shake or squeeze the ink bottles. Do not touch

the top of the ink bottle after its cap is removed.

3 Position the top of the ink bottle along the slot in front of

the ﬁlling port, then slowly stand the bottle up to insert it.

Note: Refer to the color-coded sticker to identify the color of

each tank. Do not force the bottles into position; they are keyed

for each color.

4 Wait for the ink to ﬁll the tank. Do not squeeze the bottle.

Ink ﬂows into the tank and stops automatically when the

ink is ﬁlled to the upper line.

Note: If ink does not ﬂow from the bottle, lift and reinsert the

bottle.

ET-3750/ET-4750

12 When the ink conﬁrmation message appears on the LCD

screen, select Done to start charging the ink. Ink charging

takes approximately 10 minutes. A message appears

when ink charging is complete. Press the OK button to

continue.

Note: After some ink is used for charging, the rest is available for

printing.

Caution: Do not turn off the product, raise the scanner unit, or

load paper while the product is charging or you’ll waste ink.

13 To complete ﬁlling the ink tanks, repeat steps 1 through 6

using the remaining ink in the bottles.

Note: Replace the bottle cap before disposing of the bottles.

14 Close the ink tank cover and scanner unit.

15 Select Next and follow the on-screen instructions to reset

the ink levels.

16 Follow the on-screen instructions to adjust the print

quality. Press the OK button to continue.

Note: You can change these settings later using the product’s

control panel. For more information, see the online User’s Guide.

Load paper

1 Make sure the product is not charging, and then open

the front of the paper cassette and pull out the paper

cassette.

2 Slide the side edge guides all the way out.

5 When the ink tank is full, remove the ink bottle and

securely close the ink tank cap. Place the remaining ink

aside; you will need it later.

Note: Replace the bottle cap and tighten it.

6 Repeat the previous steps for the other colors.

7 Close the ink tank cover and then the scanner unit.

8 Connect the power cord to the back of the product and to

an electrical outlet.

Caution: Do not connect to your computer yet.

9 Raise the control panel, then press the power button to

turn on the product.

Note: If an error message appears, turn off the product and

check that no protective material has been left inside the product.

10 ET-3750: Press or to select your language on the

LCD screen, then press the OK button.

ET-4750: Select your language, country, and time.

Follow steps 11 and 12 to continue ink charging.

Note: You can change these settings later using the product’s

control panel. For more information, see the online User’s Guide.

11 When the message to see the Start Here sheet appears

on the LCD screen:

ET-3750: Press the OK button, then press and hold the

help button for 3 seconds.

ET-4750: Press and hold the

help button for

3 seconds.

Install software

Note: If your computer does not have a CD/DVD drive or you are

using a Mac, an Internet connection is required to obtain the product

software.

To print from a Chromebook™, go to www.epson.com/support/gcp

(U.S.) or www.epson.ca/support/gcp (Canada) for instructions.

1 Make sure the product is NOT CONNECTED to your

computer.

Windows

: If you see a Found New Hardware screen, click

Cancel and disconnect the USB cable.

2 Insert the product CD or download and run your product’s

software package:

ET-3750

www.epson.com/support/et3750

(U.S.)

www.epson.ca/support/et3750 (Canada)

ET-4750

www.epson.com/support/et4750

(U.S.)

www.epson.ca/support/et4750 (Canada)

3 Follow the instructions on the computer screen to run the

setup program.

4 When you see the Select Your Connection screen, select

one of the following:

• Wireless connection

In most cases, the software installer automatically

attempts to set up your wireless connection. If setup

is unsuccessful, you may need to enter your network

name (SSID) and password.

• Direct USB connection

Make sure you have a USB cable (not included).

• Wired network connection

Make sure you have an Ethernet cable (not included).

Mobile printing

Connect wirelessly from your smartphone, tablet, or computer.

Print documents and photos from across the room or around

the world:

• Print directly from a smartphone or tablet using iOS or

Android™ with Epson iPrint™. Simply connect your printer

and device to the same network and tap the action icon to

select the print option.

• Use Epson Print Enabler (free from Google Play™) with

Android devices (v4.4 or later). Then connect your printer

and device to the same network and tap the menu icon to

select the print option.

• Print remotely with Epson Connect™ and Google Cloud

Print™. See your online User’s Guide for instructions or

learn more at www.epson.com/connect (U.S.) or

www.epson.ca/connect (Canada).

3 Insert paper with the glossy or printable side down.

Note: Make sure the paper is loaded against the front edge

guide and not sticking out from the end of the cassette.

4 Slide the side edge guides against the paper, but not too

tightly. Close the front of the cassette.

5 Keep the cassette ﬂat as you insert it all the way.

6 Pull out the output tray.

7 Select the paper settings on the product’s control panel.

Connect the fax line

(ET-4750)

1 Connect a phone cord to a telephone wall jack and to the

LINE port on your product. See the online User’s Guide

for more information.

2 Press Proceed to set up the fax, or press Set Up Later to

set it up later.

EPSON is a registered trademark, Epson Connect and Epson iPrint are trademarks, and

EPSON Exceed Your Vision is a registered logomark of Seiko Epson Corporation.

Designed for Excellence is a trademark of Epson America, Inc.

Mac is a trademark of Apple Inc., registered in the U.S. and other countries.

Android, Google Cloud Print, Chromebook, and Google Play are trademarks of Google Inc.

General Notice: Other product names used herein are for identiﬁcation purposes only and may

be trademarks of their respective owners. Epson disclaims any and all rights in those marks.

This information is subject to change without notice.

Printed in XXXXXX

CPD-53873

Any problems?

Network setup was unsuccessful.

• Make sure you select the right network name (SSID).

• Restart your router (turn it off and then on), then try to

connect to it again.

• The printer can only connect to a network that supports

2.4 GHz connections. If your router offers both 2.4 GHz and

5 GHz connections, make sure 2.4 GHz is enabled.

• If you see a ﬁrewall alert message, click Unblock or Allow to

let setup continue.

• If your network has security enabled, make sure you enter

your network password (WEP key or WPA passphrase)

correctly. Be sure to enter your password in the correct case.

There are lines or incorrect colors in my printouts.

Run a nozzle check to see if any of the print head nozzles are

clogged. Then clean the print head, if necessary. See the online

User’s Guide for more information.

The product’s screen is dark.

Make sure your product is turned on, and press any button

(ET-3750) or touch the screen (ET-4750) to wake it from sleep

mode.

Setup is unable to find my product after connecting it

with a USB cable.

Make sure your product is on and securely connected.

Any questions?

Quick Guide

Basic information, troubleshooting, and limited warranty.

User’s Guide

Windows: Click the icon on your desktop or Apps screen to

access the online User’s Guide.

Mac: Click the icon in Applications/Epson Software/Guide to

access the online User’s Guide.

If you don’t have a User’s Guide icon, go to the Epson website,

as described below.

Technical support

Visit www.epson.com/support (U.S.) or

www.epson.ca/support (Canada) and search for your product

to download drivers, view manuals, get FAQs, or contact Epson.

Call (562) 276-4382 (U.S.) or (905) 709-3839 (Canada), 6

am to

8 pm Paciﬁc Time, Monday through Friday, and 7 am to 4 pm,

Paciﬁc Time, Saturday. Days and hours of support are subject

to change without notice. Toll or long distance charges may

apply.

Recycling

Epson offers a recycling program for end of life hardware and

ink bottles. Please go to www.epson.com/recycle (U.S.) or

www.epson.ca/recycle (Canada) for information on how to

return your products for proper disposal.

Need paper and ink?

Ensure peak performance and brilliant results

with Genuine Epson

Ink and specialty papers,

engineered speciﬁcally for Epson printers. Find

Genuine Epson Ink and specialty papers at

www.epson.com (U.S. sales) or www.epson.ca

(Canadian sales) and at Epson authorized

resellers. Call 800-GO-EPSON (800-463-7766).

ET-3750/ET-4750 replacement inks

Color Part number

Black 502

Cyan 502

Magenta 502

Yellow 502

Epson ET-4750 User manual

This manual is also suitable for

Epson ET-4750 User manual

Related papers

Other documents