Brother Innov-is BP2100 Installation guide

Type
Installation guide

This manual is also suitable for

Read this guide before installing.
Lesen Sie diese Anleitung vor der Installation durch.
Lisez ce guide avant de procéder à l'installation.
Lees deze handleiding alvorens te installeren.
Leggere la presente guida prima dell'installazione.
Antes de instalar, lea este guía.
Leia este guia antes da instalação.
Перед началом установки прочитайте данное руководство.
ENGLISH
KIT
I
Installation Guide
ESPAÑOL
Guía de instalación
del KIT
I
PORTUGUÊS
KIT
I
Guia de Instalação
NEDERLANDS
KIT
I
Installatie handleiding
FRANÇAIS
Guide d’installation
du KIT
I
DEUTSCH
Installationsanleitung
für KIT
I
ITALIANO
Guida all’installazione
del
KIT
I
РУССКИЙ
КОМПЛЕКТ
I
Руководство по установке
Thank you for choosing our product.
For additional product information and updates, visit our website at www.brother.com.
Information found in this guide is current at the time of printing.
Please be aware that some contents of this manual and product specifications are subject to change without
notice.
The examples used throughout this guide are screens shots taken from Windows 8.1.
Read this guide before installing.
Vielen Dank, dass Sie sich für unser Produkt entschieden haben.
Weitere Produktinformationen und Aktualisierungen finden Sie auf unserer Website unter www.brother.com.
Die Informationen in dieser Anleitung sind zum Zeitpunkt der Drucklegung aktuell.
Beachten Sie bitte, dass Änderungen am Inhalt dieser Bedienungsanleitung und den Produktspezifikationen
vorbehalten sind.
Für die Beispiele in dieser Anleitung wurden Bildschirmdarstellungen von Windows 8.1 verwendet.
Lesen Sie diese Anleitung vor der Installation.
Nous vous remercions d’avoir choisi notre produit.
Pour plus d’informations sur les produits et les mises à jour, visitez notre site Web à l’adresse www.brother.com.
Les informations contenues dans de ce guide sont à jour au moment de l’impression.
Le contenu de ce guide et les spécifications de ce produit peuvent être modifiés sans avis préalable.
Les exemples utilisés dans ce guide sont des copies d’écran de Windows 8.1.
Lisez ce guide avant de procéder à l’installation.
Gefeliciteerd met de aanschaf van dit product.
Meer informatie over onze producten en updates vindt u op onze website www.brother.com.
De informatie in deze handleiding was actueel op het moment van afdrukken.
De inhoud van deze handleiding en de specificaties van dit product kunnen zonder kennisgeving worden
gewijzigd.
Gebruikte voorbeelden van schermafbeeldingen in deze handleiding zijn gemaakt met Windows 8.1.
Lees deze handleiding voordat u begint met installeren.
Grazie per aver acquistato il nostro prodotto.
Per ulteriori informazioni sui prodotti e sugli aggiornamenti, visitare il nostro sito Web all’indirizzo
www.brother.com.
Le informazioni contenute in questa guida sono aggiornate alla data di stampa.
Il contenuto della guida e le specifiche del prodotto sono soggetti a modifiche senza preavviso.
Gli esempi riportati all’interno della presente guida sono screenshot ricavati da Windows 8.1.
Leggere la presente guida prima dell’installazione.
Gracias por elegir nuestro producto.
Si desea obtener actualizaciones o información adicional acerca del producto, visite nuestro sitio web
www.brother.com.
La información que se encuentra en esta guía está actualizada al momento de la impresión.
Tenga en cuenta que parte del contenido de este manual y las especificaciones del producto están sujetas a
cambios sin previo aviso.
Los ejemplos utilizados en esta guía son capturas de pantalla de Windows 8.1.
Lea esta guía antes de la instalación.
Obrigado por escolher este produto.
Para atualizações e informações adicionais do produto, visite o nosso site na web: www.brother.com.
As informações disponibilizadas neste manual são as atuais no momento da impressão.
Esteja ciente de que alguns conteúdos deste manual e as especificações do produto estão sujeitos a alterações
sem aviso prévio.
Os exemplos utilizados neste guia são capturas de tela do Windows 8.1.
Leia este guia antes da instalação.
Благодарим за выбор нашей продукции!
Для получения дополнительной информации и обновлений посетите наш веб-сайт www.brother.com.
Информация, приведенная в настоящем руководстве, действительна на момент печати.
Обратите внимание, что содержимое настоящего руководства и
характеристики изделия могут быть
изменены без предварительного уведомления.
В качестве примеров в тексте настоящего руководства показаны снимки экранов для операционной системы Windows 8.1.
Перед началом установки прочитайте данное руководство.
1
ENGLISH
CONTENTS
Accessories ................................................................................ 2
Using the Manuals ..................................................................... 2
Installation Overview ................................................................. 3
Computer Requirements............................................................. 3
Installation Procedure................................................................. 4
2
Accessories
The following items are included with your purchase.
Please verify all contents and if anything is missing or
damaged, contact your authorized dealer.
•CD-ROM
The CD-ROM contains the following files.
The Certification Key Issuing Wizard
Follow the procedure on this Installation
Guide to upgrade your machine.
30 embroidery patterns
Embroidery design guide (PDF version)
Installation Guide (this guide)
Embroidery frame set
H 30 cm × W 20 cm (H 12 inches × W 8 inches)
After the KIT is activated, this embroidery frame
can be used, and the maximum embroidering
area becomes wider than on previous frames
included with your machine. Several patterns
saved on the included CD-ROM can be
embroidered using this embroidery frame.
Embroidery frame set
H 20 cm × W 20 cm (H 8 inches × W 8 inches)
This embroidery frame is perfect for quilting.
Using the Manuals
Installation Guide (this manual)
This guide contains descriptions of the
accessories, and procedures for upgrading the
machine.
Operation Manual (PDF version)
The Operation Manual provides descriptions for
using the machine with the added functions and
accessories.
Be sure to use the machine and the included
accessories according to the descriptions in the
Operation Manual.
Adobe Reader is required for viewing and
printing the Operation Manual.
Note
Download a copy of the Operation Manual using the
Certification Key Issuing Wizard in step
g on page
5.
3
ENGLISH
Installation Overview
First, use the Certification Key Issuing Wizard on the
enclosed CD-ROM to obtain a Certification Key. Then,
use the CERTIFICATION key within the Settings screen,
page 4 or 7, to activate the upgrade application for KIT
I
on the sewing machine.
In the procedures section, indicates operations
performed with the sewing machine and
indicates operations performed with the computer.
[Step 1] Make a note of the internal
machine identification number (No.).
[Step 2] Insert the CD-ROM into the
computer’s CD-ROM drive, and then
start the Certification Key Issuing
Wizard.
[Step 3] Follow the wizard instructions
for obtaining the Certification Key.
[Step 4] Install the upgrade application
for KIT
I on the sewing machine.
[Step 5] Turn the machine off, remove
the USB media device and then turn the
machine back on.
[Step 6] After the upgrade has been
successfully installed, certify the “KIT
I
in the Settings screen of the sewing
machine.
Computer Requirements
Before starting the Certification Key Issuing Wizard,
check that the computer to be connected meets the
following operating conditions.
* “IBM” is a registered trademark of IBM Corporation in the United
States and other countries.
* “Windows” and “Windows Vista” are registered trademarks of
Microsoft Corporation in the United States and other countries.
* “Adobe” and “Adobe Reader” are either registered trademarks or
trademarks of Adobe Systems Incorporated in the United States
and/or other countries.
* Each company whose software title is mentioned in this guide has a
Software License Agreement specific to its proprietary programs.
All other brands and product names mentioned in this guide are
registered trademarks of their respective companies. However, the
explanations for markings such as
®
and ™ are not exhibited
clearly within the text.
Computer IBM-PC or compatible computer
Operating System Windows Vista, Windows 7, 8,
8.1 (32 or 64bit)
CD-ROM drive Required for installation
Others Internet connection available
and one available USB port
(required to upgrade the sewing
machine) when using computer
4
Installation Procedure
The following procedure describes how to upgrade
your sewing machine to KIT
I.
a
Make a note of the 10-digit number (internal
machine identification number) displayed
beside “No.” on page 4 or 7 of the Settings
screen.
* The number of pages in the Settings screen may differ depending
on the version.
b
Insert the CD-ROM into the computer’s CD-
ROM drive.
c
Open the designated drive for your CD-ROM
(usually the “D” drive) on Computer (My
Computer), double-click to start the
Certification Key Issuing Wizard.
The Select Language dialog box automatically
appears.
d
Select the desired language, and then click
“OK”.
KIT I Certification Key Issuing Wizard appears.
e
Carefully read the information that appears,
and then click “Next”.
Note
If the procedure described below is not fully
completed, your sewing machine cannot be
upgraded to KIT
I.
Access to the internet is required in order to
download the upgrade program and to obtain a
Certification Key.
Memo
Make sure the internal machine identification
number (No.) is recorded accurately as these
numbers need to be entered within the Certification
Key Issuing Wizard in order to obtain the
Certification Key.
Internal
machine
identification
number (No.)
Version
number
Note
The internal machine identification number that
appears beside “No.” is different from the machine
serial number (SER. NO.) located on the label
attached to the back of the sewing machine.
Memo
In Windows 7 or Windows Vista, when the AutoPlay
dialog box appears, click Open folder to view files.
In Windows 8 or 8.1, click on the message Tap to
choose what happens with this disc. appears on
the screen.
Memo
The following procedure can be used to start the
Certification Key Issuing Wizard.
1. Click Start.
2. Click Run or in the search box, type run, and
then, in the list of results, click Run.
The Run dialog box appears.
3. Type the path to the application file
(D:\KeyWizard_KITI.exe), and then click OK.
5
ENGLISH
f
Download the latest upgrade program.
Confirm the model of your machine, click
“Download”, then save the upgrade program
(************.upf) to your computer. Click
“Next”.
Click “OK” to close the message below.
g
Download the manual.
Select your preferred language and click
“Download” to save the file to your computer,
then click “Next”.
h
Type in the 15-digit CD key found on the label
attached to the CD-ROM envelope of the
upgrade kit, and then click “Next
If an error message appears
Check below list for possible entry error(s). To
close the message, click “OK”.
Are symbols or characters other than letters and
numbers entered?
Has the uppercase letter “I” been entered in place of
the number “1”?
Has the uppercase letter “O” been entered in place
of the number “0”?
Note
If the displayed version or later has already been
installed in the machine (see step
a on page 4),
click “Next” to continue with the procedure without
downloading the latest file. Follow step
h to l,
and skip step
m to r, then start the procedure
from step
s on page 9.
Note
Type in the CD key on the label attached to the CD-
ROM envelope for machines.
Memo
The uppercase letter “O” and “I” are not used in the
CD Key. Also, no symbols are used in the CD key.
6
i
Type in the internal machine identification
number (No.) written down in step
a, and
then click “Next.
If an error message appears
Check that symbols or characters other than
numbers have not been entered. To close the
message, click “OK”.
j
Carefully verify that the information has been
entered correctly and then click “Certify”.
If an error message appears
Check below list for possible error(s). To close
the message, click “OK”.
Verify that the CD key and internal machine
identification number (No.) have been entered
correctly, and then repeat the procedure from step
c.
The CD Key is valid for use with only one
designated internal machine identification number
(No.). Check that the CD key has been entered
correctly, and then repeat the procedure from step
c.
Check the Internet connection, and then click
“Certify” again.
k
Write down the 8-digit Certification Key that
appears.
l
Click “Finish”.
The certification key has been successfully obtained.
Now proceed to installing the upgrade application for
KIT
I on the sewing machine.
Use USB media or a computer to install the upgrade
application.
If
USB media is to be used, refer to the instructions that
follow.
If a
computer is to be used, refer to the procedure
described on page 8.
Memo
To change the entered information, click “Back”.
Note
After upgrading the sewing machine to KIT I, the
Certification Key must be entered in the sewing
machine Settings screen.
7
ENGLISH
When using USB media to perform the installation
m
While pressing the “Automatic Threading”
button, turn the sewing machine on.
n
Copy the upgrade program downloaded in
step
f to the USB media.
o
Press .
p
Insert the USB media into the primary (top)
USB port connector on the right side of the
machine. It will take a few seconds until the
machine recognizes that the USB media has
been inserted into the port.
q
Press .
r
Remove the USB media.
Continue with step s on page 9.
Note
Copy only the upgrade program to a clean re-
formatted USB media; no other files should be on
this media.
Note
When the message “Upgrade complete.” appears,
installation of the upgrade application has been
completed.
(If an error occurs, a message will appear in red.)
8
When using a computer to perform the installation
m
While pressing the “Automatic Threading”
button, turn the sewing machine on.
n
Press .
o
Plug the USB cable connectors into the
corresponding USB port connectors for the
computer and for the machine.
Removable Disk appears in Computer (My
Computer).
p
Copy the upgrade program downloaded in
step
f to the Removable Disk.
q
Press .
Note
Do not connect any additional USB media devices to
your computer when using the USB cable.
Note
The “Connected to PC. Do not disconnect the
USB cable”. message appears on the sewing
machine LCD screen.
Note
When the message “Upgrade complete.” appears,
installation of the upgrade application has been
completed.
(If an error occurs, a message will appear in red.)
9
ENGLISH
r
Unplug the USB cable.
s
Turn the sewing machine off, then on again.
t
Display page 4 or 7 of the Settings screen.
u
Press in the Settings screen.
v
Press in the following screen.
w
Type in the 8-digit Certification Key written
down in step
k, and then press .
10
x
Certification has been completed when the
following screen appears. Turn off the sewing
machine and then turn on again.
y
Confirm that there is a check mark beside “KIT
I” in the Settings screen.
The “KIT I” has been successfully certified.
Note
If the following screen appears, type in the 8-digit
Certification Key written down in step
k, and then
press .
If the Certification Key is lost, repeat steps
b
through
l to attain the Certification Key.
Note
For details of the upgraded functions, see the
Operation Manual (PDF version) downloaded using
the Certification Key Issuing Wizard.
Please refer to page 5 for Operation Manual
download information.
XG3164-001
English
German
French
Dutch
Italian
Spanish
Portuguese-BR
Russian
Printed in Taiwan
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84

Brother Innov-is BP2100 Installation guide

Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI