Ice-O-Matic IOD200 Datasheet

IOD200
Ice-O-Matic
Brand
Ice-O-Matic
Model
IOD200
Category
Ice cube makers
Type
Datasheet

Ice-O-Matic IOD200 ice-only or water/ice dispenser offers a compact solution for storing and dispensing ice. With a storage capacity of 200 lbs (91 kg) and a space-saving design, it's ideal for tight spaces and hard water areas. The direct dispense feature ensures ice hits the glass every time, while the quick stop prevents overflow and waste. The dispenser also features a power clean function for easy cleaning without moving the ice machine.

Ice-O-Matic IOD200 ice-only or water/ice dispenser offers a compact solution for storing and dispensing ice. With a storage capacity of 200 lbs (91 kg) and a space-saving design, it's ideal for tight spaces and hard water areas. The direct dispense feature ensures ice hits the glass every time, while the quick stop prevents overflow and waste. The dispenser also features a power clean function for easy cleaning without moving the ice machine.

Features
• Only 30" (762 mm) wide
• Stores 200 lbs (91 kg) of ice.
• Direct Dispense — ensures that ice hits the glass every time.
• Quick Stop — prevents ice overflow and waste.
• Perfect for cube or Pearl Ice® ice makers.
• Power Clean allows access to the bin for easy cleaning
without moving the ice machine. Interlock safety switch
turns off machine agitation when tip-front access panel
is removed.
• 1" (25 mm) foam-insulation for maximum ice preservation–
no more quick–melting ice.
• Constructed from corrosion-resistant stainless steel and
fingerprint-proof plastic.
• Auto Rotate — turns the ice for four seconds every hour to
consistently provide more dispensable ice.
Space-Saving Solutions
• Great for hard water, food safety and tight spaces.
• Ultra-low profile design.
• Maximum ice storage in a minimum amount of space.
• User friendly push-to-dispense operation.
IODICEONLYORWATER/ICEDISPENSER
IODICEONLYORWATER/ICEDISPENSER
Ice. Pure and Simple
Options & Accessories
ICEONIOD
Ice Form
C U B E
FULLCUBEDIMENSIONS
W x D x H (in.) ⁄x ⁄x ⁄
W x D x H (mm) 22 x 22 x 22
HALFCUBEDIMENSIONS
W x D x H (in.) ⁄x ⁄x ⁄
W x D x H (mm) 22 x 22 x 10
Model No. ICE ICE ICE ICE GEM GEM GEM
Air-Cooled
336 (153) 505 (230) 600 (273) 652 (296) 700 (318) 1,080 (490) 1,120 (508)
Water-Cooled
333 (151) 496 (225) 596 (271) 619 (281) 745 (338) 1,110 (499) 1,345 (610)
Remote-Cooled
n/a n/a 567 (258) 605 (275) 615 (279) 920 (417) 1,110 (503)
Voltage Char.
115/60/1 115/60/1 115/60/1 208-230/60/1 115/60/1 208-230/60/1 208-230/60/1
ICEPRODUTIONFOROPTIONALCUBEORPEARLICEMAKERS*
Tested at 70°F Air/50°F Water.
*Pounds (Kilograms) per 24 hours.
Item
Number
Description
Approximate
Shipping Weight
lbs (kg)
KWGFID Water Glass Filler Kit for 30" IOD 2 (1)
KBT Adapter for 22" Cubers or 21" GEM on 30" IOD 24 (11)
KBT Adapter for 30" Cubers or GEM on 30” IOD 24 (11)
KGEMDIV & KEBIOD Required for GEM on 30" IOD 3 (1)
Rev: 06/10
Part: 4001
11100 E. 45th Avenue • Denver, CO 80239 • Phone: 1. 866. PURE. ICE • Fax: 303. 371. 6296 • www.iceomatic.com
Ice. Pure and Simple
IODICEONLYORWATER/ICEDISPENSER
NOTES:
Number of Wires: 3 (including ground)
Approx. Shipping Weight lbs (kg): 193 (88)
IODICEONLYORWATER/ICEDISPENSER
All specifications and performance data are subject to normal manufacturing variances.
Ice-O-Matic’s® machines are not designed for outdoor installations. Ice-O-Matic® remote condensers are designed for outdoor installations.
Machine requires voltage indicated on rating name plate. Failures caused by improper voltage are not considered factory defects. Extended periods of operation at temperature exceeding
limitations constitutes misuse under the terms of Ice-O-Matic® Manufacturer’s Limited Warranty, resulting in a loss of warranty coverage. Specifications and design are subject to change
without notice.
Specifications
ALLMODELS
Dimensions
W x D x H (in.)
30.25 x 30.69 x 35.62
W x D x H (mm)
768 x 779 x 905
Model Number
Dispenser
Operation
Bin Storage
lbs (kg)
Voltage
Characteristics
No. of
Wires
Min. Circuit
Ampacity
Maximum
Fuse Size
Approximate
Shipping Weight
lbs (kg)
IOD Push Bar 200 (91) 115/60/1 Cord 3.5 15 193 (88)
12¼"
(311 mm)
30¼"
(768 mm)
2 ⁄"
(73 mm)
35⁄"
(905 mm)
7¾"
(199 mm)
2¾"
(70 mm)
10
⁄"
(275 mm)
Cup
Clearance
21¼"
(540 mm)
29"
(737 mm)
30
⁄"
(779 mm)
30 ⁄"
(773 mm)
30"
(750 mm)
⁄" (4) plcs
(11 mm)
1⁄"
(45 mm)
1⁄"
(33 mm)
18⁄"
(473 mm)
23"
(584 mm)
3½"
(89 mm)
11"
(295 mm)
26⁄"
(672mm)
9⁄"
(233 mm)
30 ⁄"
(779 mm)
Removable
Sink
To front of
drip tray on
counter top
To front top of
drip tray
29"
(737 mm)
21¼"
(531 mm)
12"
(300 mm)
9"
(225 mm)
Opening
Mounting
Template
Recommended counter opening size 9" (229 mm) x 12" (305 mm)
for utilities and tubing. Opening can be located
anywhere within the shaded area.
Counter OpeningSideFront
35⁄"
(905 mm)
30¼"
(768 mm)
30"
(762 mm)
30⁄"
(779 mm)
Operating Requirements
MAXIMUM
60 Hz
AmbientTemp. Range Air 50˚F (10˚C)
100˚F (38˚C)
WaterTemp. 40˚F (4.4˚C)
Water Pressure
20 PSIG (1.4 BAR) 60 PSIG (4.1 BAR)
MINIMUM
  • Page 1 1
  • Page 2 2

Ice-O-Matic IOD200 Datasheet

IOD200
Ice-O-Matic
Brand
Ice-O-Matic
Model
IOD200
Category
Ice cube makers
Type
Datasheet

Ice-O-Matic IOD200 ice-only or water/ice dispenser offers a compact solution for storing and dispensing ice. With a storage capacity of 200 lbs (91 kg) and a space-saving design, it's ideal for tight spaces and hard water areas. The direct dispense feature ensures ice hits the glass every time, while the quick stop prevents overflow and waste. The dispenser also features a power clean function for easy cleaning without moving the ice machine.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers