Grandstream Networks UCM6200 series Installation guide

Brand: Grandstream Networks

Model: UCM6200 series

Type: Installation guide

This manual is also suitable for

UCM6208

Grandstream Networks, Inc.

126 Brookline Ave, 3rd Floor

Boston, MA 02215 USA

Tel : +1 (617) 566 – 9300

Fax: +1 (617) 249 – 1987

www.grandstream.com

For Warranty and RMA information, please visit www.grandstream.com

UCM6208 IP PBX Appliance

Quick Installation Guide

Page is loading ...

1 2

The UCM6208 is not pre-congured to support or

carry emergency calls to any type of hospital, law

enforcement agency, medical care unit (“Emergency

Service(s)”) or any other kind of Emergency Service.

You must make additional arrangements to access

Emergency Services. It is your responsibility to pur-

chase SIP-compliant Internet telephone service, prop-

erly congure the UCM6208 to use that service, and

periodically test your conguration to conrm that it

works as you expect. If you do not do so, it is your re-

sponsibility to purchase traditional wireless or landline

telephone services to access Emergency Services.

GRANDSTREAM DOES NOT PROVIDE CON-

NECTIONS TO EMERGENCY SERVICES VIA THE

UCM6208. NEITHER GRANDSTREAM NOR ITS

OFFICERS, EMPLOYEES OR AFFILIATES MAY BE

HELD LIABLE FOR ANY CLAIM, DAMAGE, OR LOSS.

YOU HEREBY WAIVE ANY AND ALL SUCH CLAIMS

OR CAUSES OF ACTION ARISING FROM OR RE-

LATING TO YOUR INABILITY TO USE THE UCM6208

TO CONTACT EMERGENCY SERVICES, AND YOUR

FAILURE TO MAKE ADDITIONAL ARRANGEMENTS

TO ACCESS EMERGENCY SERVICES IN ACCOR-

DANCE WITH THE IMMEDIATELY PRECEDING

PARAGRAPH.

PACKAGE CONTENTS:

• Do not attempt to open, disassemble, or modify the device.

• Do not use a third party power adapter.

• Do not expose this device to temperatures outside the range of 0 °C to +40 °C for

operating or -10 °C to +60 °C for storage.

• Do not expose this device to environment outside of the following humidity range:

10-90% RH (non-condensing).

• Do not power cycle the device during system boot up or rmware upgrade. You

may corrupt rmware images and cause the unit to malfunction.

1x UCM6208 1x RJ45 Cable

1x 12V Power Adapter

OVERVIEW:

UCM6208 is an innovative IP PBX appliance designed for small to medium busi-

ness. Powered by an advanced hardware platform with robust system resources,

the UCM6208 offers a highly versatile state-of-the-art Unied Communication

(UC) solution for converged voice, video, data, fax and video surveillance ap-

plication needs. Incorporating industry-leading features and performance, the

UCM6208 offers quick setup, easy deployment and unrivaled reliability all at an

unprecedented price point.

6x Screws2x Wall Mounts

PRECAUTIONS:

1x Quick Installation Guide

1x GPL License

12V

3 4

CONNECTING THE UCM6208:

1. Connect one end of an RJ-45 Ethernet cable into the WAN port of the

UCM6208.

2. Connect the other end of the Ethernet cable into the uplink port of an Ether-

net switch/hub.

3. Connect the 12V DC power adapter into the 12V DC power jack on the back of

the UCM6208. Insert the main plug of the power adapter into a surge-protected

power outlet.

4. Wait for the UCM6208 to boot up. The front LCD display will show the UCM’s

hardware information when the boot process is completed.

5. Once the UCM6208 is successfully connected to a network, the Network LED

indicator will be lit green, and an IP address will be shown on the LCD display.

6. (Optional) Connect PSTN lines from the wall jack to the FXO ports, connect

analog devices (phone and fax) to the FXS ports.

2x FXS Port

WAN Port

Reset

8x FXO Port

SD Card Slot

USB

Port

Ground

USING THE UCM6208 KEYPAD MENU:

CONFIGURING THE UCM6208 VIA WEB GUI:

1. Connect the computer to the same network as the UCM6208.

2. Ensure the UCM6208 is properly powered on and displays the IP address on

the LCD screen.

3. Open a web browser on the computer and enter the displayed IP address into

the search bar in the following format: http(s)://ipaddress:portnumber.

The default protocol is HTTPS and the default port number is 8089.

4. The web portal should be shown (see gure below). Enter the default admin-

istrator credentials:

• Username: admin

• Password: admin

Note: Units manufactured from January 2017 onwards have unique default pass-

words printed on their stickers. Older units have “admin” as the default password.

5. For more detailed information on how to congure SIP extensions, PSTN con-

nections, SIP trunks, and other system settings via the web UI, please download

the UCM6208 user manual here: http://www.grandstream.com/support/

1. Press “Down” or “OK” key to start browsing menu options.

2. Press “Down” to browse different menu options. Press “OK” to select an entry.

3. In the menu option, select “Back” to go back to previous menu.

4. The LCD will return to default display after being idle in menu for more than 20

seconds.

LCD

Navigation

Keys

LED Indicators

This product is covered by one or more of the U.S. patents (and any

foreign patent counterparts thereto) identied at www.cmspatents.com.

DC 12V

LAN Port

ACT

USB

Phone1

Phone2

Network

DC IN

RESET

LAN

WAN

Page is loading ...

37 38

FCC Caution:

Any Changes or modications not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a resi-

dential installation. This equipment generates, uses and can radiate radio fre-

quency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equip-

ment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

Regulatory Information

U.S. FCC Part 68 Statement

This equipment complies with Part 68 of the FCC rules and the requirements

adopted by the ACTA. The unit bears a label on the back which contains among

other information a product identier in the format US: GNIIS01BUCM6208. If

requested, this number must be provided to the telephone company.

This equipment uses the following standard jack types for network connection:

RJ11C.

This equipment contains an FCC compliant modular jack. It is designed to be

connected to the telephone network or premises wiring using compatible modular

plugs and cabling which comply with the requirements of FCC Part 68 rules.

The Ringer Equivalence Number, or REN, is used to determine the number of

devices which may be connected to the telephone line. An excessive REN may

cause the equipment to not ring in response to an incoming call. In most areas,

the sum of the RENs of all equipment on a line should not exceed ve (5.0).

In the unlikely event that this equipment causes harm to the telephone network,

the telephone company can temporarily disconnect your service. The telephone

company will try to warn you in advance of any such disconnection, but if advance

notice isn’t practical, it may disconnect the service rst and notify you as soon as

possible afterwards. In the event such a disconnection is deemed necessary, you

will be advised of your right to le a complaint with the FCC.

From time to time, the telephone company may make changes in its facilities,

equipment, or operations which could affect the operation of this equipment. If

this occurs, the telephone company is required to provide you with advance no-

tice so you can make the modications necessary to obtain uninterrupted service.

There are no user serviceable components within this equipment. See Warranty

yer for repair or warranty information.

It shall be unlawful for any person within the United States to use a computer or

other electronic device to send any message via a telephone facsimile unless

such message clearly contains, in a margin at the top or bottom of each transmit-

ted page or on the rst page of the transmission, the date and time it is sent and

an identication of the business, other entity, or individual sending the message

and the telephone number of the sending machine or of such business, other

entity, or individual. The telephone number provided may not be a 900 number or

any other number for which charges exceed local or long distance transmission

charges. Telephone facsimile machines manufactured on and after December 20,

1992, must clearly mark such identifying information on each transmitted mes-

sage. Facsimile modem boards manufactured on and after December 13, 1995,

must comply with the requirements of this section.

This equipment cannot be used on public coin phone service provided by the

telephone company.

Connection to Party Line Service is subject to state tariffs. Contact your state

public utility commission, public service commission, or corporation commission

for more information.

Grandstream Networks UCM6200 series Installation guide

Brand: Grandstream Networks

Model: UCM6200 series

Type: Installation guide

This manual is also suitable for

UCM6208

Download PDF

report

in other languages

italiano: Grandstream Networks UCM6200 series Guida d'installazione
français: Grandstream Networks UCM6200 series Guide d'installation
español: Grandstream Networks UCM6200 series Guía de instalación
Deutsch: Grandstream Networks UCM6200 series Installationsanleitung
русский: Grandstream Networks UCM6200 series Инструкция по установке
português: Grandstream Networks UCM6200 series Guia de instalação
polski: Grandstream Networks UCM6200 series Instrukcja instalacji

Grandstream Networks UCM6200 series Installation guide

This manual is also suitable for

Grandstream Networks UCM6200 series Installation guide

in other languages

Related papers

Other documents