LG HR836T User guide

Brand: LG

Model: HR836T

Category: Blu-Ray players

Type: User guide

LG HR836T is a versatile Blu-ray Disc™ Player with built-in HDD and HD Tuner. It supports playback of various disc formats including Blu-ray 3D, DVD, and CD. You can also enjoy multimedia content from USB storage devices or stream content from compatible online services through its network connectivity. With its recording capabilities, you can record TV programs onto the built-in HDD or external storage devices.

SIMPLE MANUAL

Blu-ray Disc™ Player with

built-in HDD & HD Tuner

Please read this manual carefully before operating

your set and retain it for future reference.

HR836T

ENGLISH

To view the instructions of advanced features, visit http://www.lg.com and

then download Owner’s Manual.

1 Getting Started

Getting Started2

Getting Started

Safety Information

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK DO NOT REMOVE COVER (OR BACK) NO

USER-SERVICEABLE PARTS INSIDE REFER SERVICING

TO QUALIFIED SERVICE PERSONNEL.

This lightning ash with arrowhead

symbol within an equilateral triangle

is intended to alert the user to the

presence of uninsulated dangerous

voltage within the product’s

enclosure that may be of sucient magnitude to

constitute a risk of electric shock to persons.

The exclamation point within an

equilateral triangle is intended

to alert the user to the presence

of important operating and

maintenance (servicing)

instructions in the literature accompanying the

product.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK

HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN

OR MOISTURE.

WARNING: Do not install this equipment in a

conned space such as a book case or similar unit.

CAUTION: Do not block any ventilation openings.

Install in accordance with the manufacturer’s

instructions.

Slots and openings in the cabinet are provided for

ventilation and to ensure reliable operation of the

product and to protect it from over heating. The

openings shall be never be blocked by placing

the product on a bed, sofa, rug or other similar

surface. This product shall not be placed in a built-

in installation such as a bookcase or rack unless

proper ventilation is provided or the manufacturer’s

instruction has been adhered to.

CAUTION: This product employs a Laser System.

To ensure proper use of this product, please read

this owner’s manual carefully and retain it for future

reference. Shall the unit require maintenance,

contact an authorized service centre.

Use of controls, adjustments or the performance of

procedures other than those specied herein may

result in hazardous radiation exposure.

To prevent direct exposure to laser beam, do not

try to open the enclosure.

CAUTION concerning the Power Cord

Most appliances recommend they be placed upon

a dedicated circuit;

That is, a single outlet circuit which powers only

that appliance and has no additional outlets or

branch circuits. Check the specication page of this

owner’s manual to be certain. Do not overload wall

outlets. Overloaded wall outlets, loose or damaged

wall outlets, extension cords, frayed power cords, or

damaged or cracked wire insulation are dangerous.

Any of these conditions could result in electric

shock or re. Periodically examine the cord of your

appliance, and if its appearance indicates damage

or deterioration, unplug it, discontinue use of the

appliance, and have the cord replaced with an

exact replacement part by an authorized service

centre. Protect the power cord from physical or

mechanical abuse, such as being twisted, kinked,

pinched, closed in a door, or walked upon. Pay

particular attention to plugs, wall outlets, and

the point where the cord exits the appliance. To

disconnect power from the mains, pull out the

mains cord plug. When installing the product,

ensure that the plug is easily accessible.

This device is equipped with a portable battery or

accumulator.

Safety way to remove the battery or the

battery from the equipment: Remove the

old battery or battery pack, follow the steps

in reverse order than the assembly. To prevent

contamination of the environment and bring on

possible threat to human and animal health, the

old battery or the battery put it in the appropriate

container at designated collection points. Do

not dispose of batteries or battery together with

other waste. It is recommended that you use

local, free reimbursement systems batteries and

accumulators. The battery shall not be exposed to

excessive heat such as sunshine, re or the like.

CAUTION: The apparatus shall not be exposed to

water (dripping or splashing) and no objects lled

with liquids, such as vases, shall be placed on the

apparatus.

Getting Started 3

Getting Started

The appliance is not intended for use by young

children or inrm persons without supervision.

Young Children should be supervised to ensure

that they do not play with appliance.

If the appliance is supplied from a cord

extension set or an electrical portable outlet

device, the cord extension set on electrical

portable outlet device must be positioned so

that it is not subject to splashing or ingress of

moisture.

Notes on Copyrights

This product incorporates copyright protection

technology that is protected by U.S. patents

and other intellectual property rights. Use of

this copyright protection technology must be

authorized by Rovi, and is intended for home and

other limited viewing uses only unless otherwise

authorized by Rovi. Reverse engineering or

disassembly is prohibited.

Important Notice for TV colour

system

The colour system of this player diers according to

currently playing discs.

For example, when the player plays the disc

recorded in the NTSC colour system, the image is

output as an NTSC signal.

Only the multi system colour TV can receive all

signals output from the player.

If you have a PAL colour system TV, you will see

just distorted images when using discs or video

contents recorded in NTSC.

The multi system colour TV changes the colour

system automatically according to input signals.

In case that the colour system is not changed

automatically, turn it o and then on to see

normal images on screen.

Even if the disc recorded in NTSC colour system

are well displayed on your TV, these may not be

recorded correctly on your recorder.

Getting Started4

Getting Started

Supplied Accesorries

Remote control (1) Battery (1)

OWNER’S MANUAL

Blu-ray Disc™/DVD Player

with built-in HDD & HD Tuner

HR835T / HR832T

www.lg.com

Please read this manual carefully before operating

your set and retain it for future reference.

ENGLISH

RF cable (1) Owner’s manual

What is SIMPLINK?

Some functions of this unit are controlled by the

TV’s remote control when this unit and LG TV’s with

SIMPLINK are connected through HDMI connection.

Controllable functions by LG TV’s remote control;

Play, Pause, Scan, Skip, Stop, Power O, etc.

Refer to the TV owner’s manual for the details of

SIMPLINK function.

LG TV’s with SIMPLINK function has the logo as

shown above.

Depending on the disc type or playing status,

some SIMPLINK operation may dier from your

purpose or not work.

Note

Network Software

Update

Network update notiﬁcation

From time to time, performance improvements

and/or additional features or services may be

made available to units that are connected to a

broadband home network. If there is new software

available and the unit is connected to a broadband

home network, the player will inform you about the

update as follows.

Option 1:

1. The update menu will appear on the screen

when you turn on the player.

2. Use

A/D

to select a desired option and then

press ENTER (

[OK] Starts the software update.

[Cancel] Exits the update menu and

displays it next booting.

[Hide] Exits the update menu and

it does not appear until next

software is uploaded in the

update server.

Option 2:

If the software update is available from the update

server, the “Update” icon appears in the Home

menu. Press blue (B) coloured button to start the

update procedure.

Table of Contents 5

Table of Contents

1 Getting Started

2 Safety Information

4 – Supplied Accesorries

4 Network Software Update

4 – Network update notiﬁcation

6 Introduction

6 – Playable Discs and symbols used in

this manual

7 – File requirement

8 Remote control

9 Front panel

9 Rear panel

10 Connections to Your TV

10 – Antenna connection to your TV and

this unit

10 – HDMI Connection

11 – Resolution Setting

2 System Setting

12 – Wired network connection

12 – Wired Network Setup

13 Settings

13 – Adjust the Setup Settings

3 Operating

14 General Playback

14 – Using [HOME] menu

14 – Playing a Disc

14 – Playing a ﬁle on disc/USB device

15 – Basic operations for video and audio

content

15 On-Screen display

4 Troubleshooting

16 Troubleshooting

16 – General

16 – Recording

17 – Picture

17 – Sound

17 – Network

5 Appendix

18 Trademarks and Licenses

18 – Customer Support

18 – Open source software notice

20 Speciﬁcations

Getting Started6

Getting Started

Introduction

Playable Discs and symbols used in this manual

Media/Term Logo Symbol Description

Blu-ray

Discs such as movies that can be purchased or

rented.

“Blu-ray 3D” discs and “Blu-ray 3D ONLY” discs.

BD-R/RE discs that are recorded in BDAV format.

BD-R/RE discs that contain Movie, Music or

Photo les.

ISO 9660+JOLIET, UDF and UDF Bridge format

DVD-ROM

DVD-R

DVD-RW

DVD+R

DVD+RW

(8 cm, 12 cm)

Discs such as movies that can be purchased or

rented.

Movie mode and nalized only

Supports the dual layer disc also

Finalized AVCHD format

DVD±R/RW discs that contain Movie, Music or

Photo les.

ISO 9660+JOLIET, UDF and UDF Bridge format

DVD-RW (VR)

(8 cm, 12 cm)

VR mode and nalized only

Audio CD

(8 cm, 12 cm)

Audio CD

CD-R/RW

(8 cm, 12 cm)

CD-R/RW discs that contain Movie, Music or

Photo les.

ISO 9660+JOLIET, UDF and UDF Bridge format

– –

REC

Titles recorded via this unit

Note –

Indicates special notes and operating features.

Caution –

Indicates cautions for preventing possible

damages from abuse.

Getting Started 7

Getting Started

File requirement

Movie ﬁles

File

Location

File

Extension

Codec Format Audio Format Subtitle

Disc,

USB

“.avi”, “.divx”,

“.mpg”, “.mpeg”,

“.mkv”, “.mp4”,

“.asf”, “.wmv”,

“.m4v” (DRM

free),

“.ts”

DIVX 3.11, DIVX4,

DIVX5, DIVX6,

XVID (standard

playback only), H.264/

MPEG-4 AVC, DIVX-

HD, MPEG1 SS, MPEG2

PS, MPEG2 TS

Dolby Digital,

DTS, MP3,

WMA, AAC,

AC3

SubRip (.srt / .txt), SAMI (.smi),

SubStation Alpha (.ssa/.txt),

MicroDVD (.sub/.txt), VobSub

(.sub), SubViewer 1.0 (.sub),

SubViewer 2.0 (.sub/.txt), DVD

Subtitle System (.txt)

Music ﬁles

File

Location

File

Extension

Sampling Frequency Bitrate Note

Disc,

USB

“.mp3”, “.wma”,

“.wav”, “.m4a”

(DRM free)

between 8 - 48 kHz (WMA),

within 11 - 48 kHz (MP3),

44.1 and 48 kHz (LPCM)

between 8 - 320

kbps (WMA, MP3),

768 kbps and 1.536

Mbps (LPCM)

Some wav les are

not supported on

this player.

Photo ﬁles

File

Location

File

Extension

Recommended

Size

Note

Disc,

USB

“.jpg”, “.jpeg”,

“.png”

Less than 4,000 x 3,000 x 24 bit/pixel

Less than 3,000 x 3,000 x 32 bit/pixel

Progressive and lossless

compression photo image les

are not supported.

Getting Started8

Getting Started

Battery Installation

Remove the battery cover on the

rear of the Remote Control, and

insert the R03 (size AAA) battery

with

and

matched correctly.

• • • • • •

(POWER): Switches the unit

ON or OFF.

OPEN/CLOSE (

): Opens and

closes the disc tray.

: Feature is not available.

0-9 numerical buttons: Selects

numbered options in a menu.

CLEAR: Removes a mark on the

search menu or a number when

setting the password.

REPEAT: Repeats a desired section

or sequence.

TV/RADIO: Switches between TV

and radio modes.

TV Control Buttons: Refer to the

manual on supplied CD-ROM disc.

• • • • • •

• • • • •

c/v

: Searches backward or

forward.

C/V

: Goes to next or

previous chapter/track/le.

: Starts playback.

: Pauses playback or recording.

: Stops playback.

TIME SHIFT: Activates pause live

TV/playback (timeshift) for a live

TV programme.

• • • • • •

• • • • •

HOME (

): Accesses or removes

the HOME menu.

INFO/MENU (

): Displays or

exits On-Screen Display.

W/S/A/D

(left/right/up/

down): Navigates on-screen

displays.

ENTER (

): Acknowledges menu

selection or displays the TV info.

BACK (

): Exits the menu or

back to previous step.

DISC MENU/REC.LIST: Accesses

menu on a disc or switches

between recording list menu.

• • • • • •

• • • • •

GUIDE: Displays the EPG menu.

PR (-/+): Scans up or down

through memorized programmes.

PR LIST: Displays the Channel list.

Coloured (R, G, Y, B) buttons:

Use to navigate BD-ROM menus.

They are also used for [MOVIE],

[PHOTO], [MUSIC] and [DTV]

menu.

EXIT: Exits a menu or hides on-

screen information.

SUBTITLE: Selects a subtitle

language.

TEXT: Switches between teletext

mode and normal TV viewing.

MUTE (

): Mutes the sound.

REC. (

): Starts recording.

TIMER REC.: Displays [Timer

Recording] menu.

TITLE/POPUP: Displays the DVD

title menu or BD-ROM’s popup

menu, if available.

Remote control

Getting Started 9

Getting Started

Front panel

Disc Tray

Display window

Remote Sensor

(Open/Close)

(Play/Pause)

(Stop)

g 1

/I (Power)

USB Port

Rear panel

ANTENNA IN

LAN port

HDMI OUT (TO TV)

COAXIAL (DIGITAL AUDIO OUT)

AC IN connector

Connect the supplied power cord

ANTENNA OUT (TO TV)

Getting Started10

Getting Started

Connections to Your

Antenna connection to your

TV and this unit

Connect one end of the RF cable to ANTENNA

OUT(TO TV) jack on the unit and other end to

ANTENNA IN jack on your TV. Passes the signal from

the ANTENNA IN jack to your TV/monitor.

Connect the Terrestrial TV antenna to the ANTENNA

IN jack on the unit. If you want to use an indoor

antenna, use one with a signal amplier rated at 5V,

100mA and set [Antenna 5V] to [ON] in the setup

menu.

Rear of this unit

ANTENNA

RF Cable

Rear of this unit

HDMI Connection

If you have a HDMI TV or monitor, you can connect

it to this unit using a HDMI cable (Type A, High

Speed HDMI™ Cable). Connect the HDMI jack on

the unit to the HDMI jack on a HDMI compatible TV

or monitor.

Rear of this unit

HDMI Cable

Set the TV’s source to HDMI (refer to TV’s Owner’s

manual).

Getting Started 11

Getting Started

Resolution Setting

The player provides several output resolutions for

HDMI OUT jacks. You can change the resolution

using [Setup] menu.

1. Press HOME (

2. Use

a/d

to select the [Setup] and press ENTER

(

). The [Setup] menu appears.

3. Use

w/s

to select [DISPLAY] option then press

to move to the second level.

4. Use

a/d

to select the [Resolution] option

then press ENTER (

) to move to the third level.

5. Use

w/s

to select the desired resolution then

press ENTER (

) to conrm your selection.

If your TV does not accept the resolution

you have set on the player, you can set

resolution to 576p as follows:

1. Press

to open the disc tray.

2. Press

(STOP) for more than 5 seconds.

Note

2 System Setting

System Setting12

System Setting

Wired network connection

Connect the unit’s LAN port to the corresponding

port on your Modem or Router using a

commercially available LAN or Ethernet cable (CAT5

or better with RJ45 connector). In the example

conguration for wired connection below, this

player would be able to access content from either

of the PCs.

WAN

LAN 1

LAN 2

LAN 3

LAN Cable

Rear of this unit

Router

Broadband

Service

Wired Network Setup

If there is a DHCP server on the local area network

(LAN) via wired connection, this player will

automatically be allocated an IP address. After

making the physical connection, a small number of

home networks may require the player’s network

setting to be adjusted. Adjust the [NETWORK]

setting as follow.

Preparation

Before setting the wired network, you need to

connect the broadband internet to your home

network.

1. Select [Connection Setting] option in the

[Setup] menu then press ENTER (

2. Use

w/s/a/d

to select the IP mode

between [Dynamic] and [Static].

Normally, select [Dynamic] to allocate an IP

address automatically.

If there is no DHCP server on the network and

you want to set the IP address manually, select

[Static] then set [IP Address], [Subnet Mask],

[Gateway] and [DNS Server] using

w/s/

a/d

and numerical buttons. If you make a

mistake while entering a number, press CLEAR

to clear the highlighted part.

Note

System Setting 13

System Setting

3. Select [OK] and press ENTER (

) to apply

network settings.

4. The player will ask you to test the network

connection. Select [OK] and press ENTER

(

) to complete the network connection.

5. If you select [Test] and press ENTER

(

) at step 5 above, the network connection

status is displayed on the screen.

You can also test it on the [Connection Status]

in the [Setup] menu.

Settings

Adjust the Setup Settings

You can change the settings of the player in the

[Setup] menu.

1. Press HOME (

2. Use

a/d

to select [Setup] and press ENTER

(

). The [Setup] menu appears.

3. Use

w/s

to select the rst setup option, and

press

to move to the second level.

4. Use

w/s

to select a second setup option, and

press ENTER (

) ) or

to move to the third

level.

5. Use

w/s

to select a desired setting, and press

ENTER (

) ) or

to conrm your selection.

3 Operating

Operating14

Operating

General Playback

Using [HOME] menu

To access numerous functions of the unit, press

HOME on the remote.

HOME: Accesses or removes the Home Menu.

a/d

: Used to navigate on-screen displays.

ENTER (

): Acknowledges menu selection.

BACK (

): Exits the menu.

DTV

You can watch digital broadcasts.

Movie

Starts video media’s playback or displays the

[MOVIE] menu.

Photo

Displays [PHOTO] menu.

Music

Displays [MUSIC] menu.

Netcast

Shows YouTube videos, Picasa Web Albums

and Accu Weather streamed from the Youtube

server via the internet to your TV.

Setup

Displays [Setup] menu.

Playing a Disc

ert

1. Press

(OPEN/CLOSE), and place a disc on the

disc tray.

2. Press

(OPEN/CLOSE) to close the disc tray.

For the most Audio CD, BD-ROM and

DVD-ROM discs, playback starts automatically.

3. Press HOME (

4. Select [Movie] or [Music] using

a/d

, and press

ENTER (

5. Select [BD], [DVD], [VR] or [Audio] option using

w/s

, and press ENTER (

Playback functions described in this manual

are not always available in every les and

media. Some functions can be restricted

depending on many factors.

Depending on the BD-ROM titles, a USB

device connection may be needed for the

proper playback.

Unnalized DVD VR format discs may not be

played in this player.

Some DVD-VR discs are made with CPRM

data by DVD RECORDER. This unit cannot

support these kinds of discs.

Note

Playing a ﬁle on disc/USB

device

yui

This player can play movie, music and photo les

contained in the disc or USB device.

1. Insert a data disc on the tray or connect a USB

device.

2. Press HOME (

3. Select [Movie], [Photo] or [Music] using

a/d

and press ENTER (

4. Select [Data] or [USB] option using

w/s

, and

press ENTER (

5. Select a le using

w/s/a/d

, and press

(PLAY) or ENTER (

) to play the le.

Operating 15

Operating

Basic operations for video and

audio content

To stop playback

Press

(STOP) while playback.

To pause playback

Press

(PAUSE) while playback.

Press

(PLAY) to resume playback.

To play frame-by-frame (Video)

Press

(PAUSE) while movie playback.

Press

(PAUSE) repeatedly to play Frame-by-Frame

playback.

To scan forward or backward

Press

to play fast forward or fast reverse

during playback.

You can change the various playback speeds by

pressing

repeatedly.

To slow down the playing speed

While the playback is paused, press

repeatedly

to play various speeds of slow motion.

To skip to the next/previous

chapter/track/ﬁle

During playback, press

to go to the

next chapter/track/le or to return to the beginning

of the current chapter/track/le.

Press

twice briey to step back to the previous

chapter/track/le.

On-Screen display

You can display and adjust various information and

settings about the content.

DVD

AVCHD

MOVIE

REC

1. During playback, press INFO/MENU (

) to

show various playback information.

a Title – current title number/total number of

titles

b Chapter – current chapter number/total

number of chapters

c Time – elapsed playing time/total playback

time

d Audio – selected audio language or channel

e Subtitle – selected subtitle

f Angle – selected angle/total number of

angles

g TV Aspect Ratio – selected TV aspect Ratio

h Picture Mode – selected picture mode

2. Select an option using

w/s

3. Use

a/d

to adjust the selected option value.

4. Press BACK (

) to exit the On-Screen display.

A title number cannot be selected on some

discs.

Available items may dier depending on

discs or titles.

Note

4 Troubleshooting

Troubleshooting16

Troubleshooting

General

Symptoms Cause & Solution

The Power does not turn on.

Plug the power cord into the wall outlet securely.

The unit does not start

playback.

Insert a playable disc. (Check the disc type, color system, and regional

code.)

Place the disc with the playback side down.

Place the disc on the disc tray correctly inside the guide.

Clean the disc.

Cancel the Rating function or change the rating level.

The angle cannot be changed.

Multi-angles are not recorded on the DVD Video being played.

Cannot play movie, photo or

audio les.

The les are not recorded in a format that the unit can play.

The unit does not support the codec of the movie le.

The remote control does not

work properly.

The remote control is not pointed at the remote sensor of the unit.

The remote control is too far from the unit.

There is an obstacle in the path between the remote control and the

unit.

The batteries in the remote control are exhausted.

Recording

Symptom Cause & Solution

Cannot record or does not

record successfully.

Check the remaining space on the HDD.

If your source is copy-protected, you cannot record it using this

recorder.

If you set a DTV rating for the recorder and higher rated digital

programs are received, the programme cannot be recorded. Change

the DTV rating level in order to record it.

Timer record does not record

successfully.

Clock is not set to correct time.

The start time of the timer recording is past.

When setting the recording programme, make sure you set the

recorder’s built-in tuner, not the TV’s built-in tuner.

If the HDD is damaged, the recording may not complete successfully.

You cannot enter a timer

programme when.

The time you’re trying to set has already passed.

There are already 32 timer programs set.

In case of changing broadcasting time depending on circumstances.

If two or more timer programs

overlap.

The earlier programme takes priority.

Troubleshooting 17

Troubleshooting

Picture

Symptom Cause & Solution

There is no picture.

Select the appropriate video input mode on the TV so the picture

from the unit appears on the TV screen.

Connect the video connection securely.

Check the [HDMI Color Setting] in the [Setup] menu is set to the

appropriate item that conforms to your video connection.

Your TV may not support the resolution you have set on the unit.

Change the resolution to one that your TV accepts.

The player’s HDMI OUT jack is connected to a DVI device that does

not support copyright protection.

Picture noise appears

You are playing a disc recorded in a colour system that is dierent

from your TV.

Set the resolution to one that your TV accepts.

Sound

Symptom Cause & Solution

There is no sound or the sound

is distorted.

Connect the audio connection securely.

The input source setting on the amplier or the connection to the

amplier is incorrect.

The unit is in scan, slow motion, or pause mode.

The sound volume is low.

Check that the connected amplier is compatible with the audio

format output from the player.

The player’s HDMI OUT jack is connected to a DVI device. The DVI jack

does not accept audio signal.

Check the device connected to the player’s HDMI OUT jack is

compatible with the audio format output from the unit.

Network

Symptom Cause & Solution

BD-LIVE feature does not work.

The connected USB storage may not have enough space. Connect

the USB storage with at least 1GB free space.

Ensure that the unit is correctly connected to the local area network

and can access the internet.

Your broadband speed may not be fast enough to use the BD-Live

features. Contact your Internet Service Provider (ISP) and increase the

broadband speed to suit the unit’s requirements.

The [BD-LIVE connection] option in the [Setup] menu is set to

[Prohibited]. Set the option to [Permitted].

Streaming video services (such

as YouTube™, etc.) are often stop

or “buer” during playback.

Your broadband service speed may not be fast enough to stream

video services. Contact your Internet Service Provider (ISP) and

increase the broadband speed is recommended.

5 Appendix

Appendix18

Appendix

Trademarks and

Licenses

Blu-ray Disc™, Blu-ray™, Blu-ray 3D™, BD-Live™,

BONUSVIEW™ and the logos are trademarks of

the Blu-ray Disc Association.

Java is a trademarks of Oracle and/or its aliates.

Manufactured under license from Dolby

Laboratories. Dolby and the double-D symbol

are trademarks of Dolby Laboratories

HDMI, the HDMI logo and High-Denition

Multimedia Interface are trademarks or registered

trademarks of HDMI Licensing LLC in the United

States and other countries.

“DVD Logo” is a trademark of DVD Format/Logo

Licensing Corporation.

“AVCHD” and the “AVCHD” logo are trademarks of

Panasonic Corporation and Sony Corporation.

Manufactured under license under U.S. Patent

Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S.

and worldwide patents issued & pending. DTS,

the Symbol, & DTS and the Symbol together are

registered trademarks & DTS 2.0+Digital Out is a

trademark of DTS, Inc. Product includes software.

YouTube™ is a trademark of Google Inc.

Picasa™ Web Albums is a trademark of Google

Inc.

DivX®, DivX Certied® and associated logos are

trademarks of Rovi Corporation or its subsidiaries,

and are used under license.

Customer Support

You can update the Player using the latest software

to enhance the products operation and/or add new

features. To obtain the latest software for this player

(if updates have been made), please visit http://

lgservice.com or contact LG Electronics customer

care centre.

Open source software notice

To obtain the corresponding source code under

GPL, LGPL and other open source licenses, please

visit http://opensource.lge.com. All referred license

terms, warranty disclaimers and copyright notices

are available to download with the source code.

Appendix 19

Appendix

Cinavia Notice

This product uses Cinavia technology to limit the

use of unauthorized copies of some commercially-

produced lm and videos and their soundtracks.

When a prohibited use of an unauthorized copy is

detected, a message will be displayed and playback

or copying will be interrupted.

More information about Cinavia technology

is provided at the Cinavia Online Consumer

Information Center at http://www.cinavia.com. To

request additional information about Cinavia by

mail, send a postcard with your mailing address

to: Cinavia Consumer Information Center, P.O. Box

86851, San Diego, CA, 92138, USA.

This product incorporates proprietary technology

under license from Verance Corporation and is

protected by U.S. Patent 7,369,677 and other U.S.

and worldwide patents issued and pending as well

as copyright and trade secret protection for certain

aspects of such technology. Cinavia is a trademark

Reverse engineering or disassembly is prohibited.

Appendix20

Appendix

Speciﬁcations

General

Power requirements AC 200-240 V, 50/60 Hz

Power consumption 30 W

Dimensions (W x H x D) Approx. 430 x 59.5 x 300 mm without foot

Net Weight (Approx.) 3.02 kg

Operating temperature 5 °C to 35 °C

Operating humidity 5 % to 90 %

Television system: DVB-T Standard Compliant

TV Recording

Recording format TS (Transport Stream format)

Recordable media Hard Disk Drive (500 GB), USB 2.0 HDD

Connectors

HDMI OUT (video/audio) 19 pin (HDMI standard, Type A)

DIGITAL OUT (COAXIAL) 0.5 V (p-p), 75 Ω, RCA jack x 1

ANTENNA IN Antenna input, 75 Ω

USB Port 4 pin (USB 2.0 standard)

System

Laser Semiconductor laser

wavelength 405 nm / 650 nm

Signal system Standard PAL/NTSC colour TV system

Frequency response 20 Hz to 20 kHz (48 kHz, 96 kHz, 192 kHz sampling)

Signal-to-noise ratio More than 100 dB (Analogue OUT connectors only)

Harmonic distortion Less than 0.008%

Dynamic range More than 95 dB

LAN port Ethernet jack x 1, 10BASE-T/100BASE-TX

Bus Power Supply (USB) DC 5 V

500 mA

Design and specications are subject to change without notice.

Page is loading ...

LG HR836T User guide

Brand: LG

Model: HR836T

Category: Blu-Ray players

Type: User guide

Download PDF

report

LG HR836T User guide

LG HR836T User guide

Related papers

Other documents