Acer W100 User manual

Page is loading ...

Acer Liquid Leap User’s Manual

Model: W1C

This revision: August 2015

Acer Liquid Leap

Model number:_______________________________________________

Serial number: _______________________________________________

Date of purchase: ____________________________________________

Place of purchase: ___________________________________________

Google Play is a trademark of Google Inc.

For more information, please visit: http://go.acer.com/liquidleap.

Important

This manual contains proprietary information that is protected by

copyright laws. The information contained in this manual is subject to

change without notice. Images provided herein are for reference only

and may contain information or features that do not apply to your

device. Acer Group shall not be liable for technical or editorial errors or

omissions contained in this manual.

User’s Manual

2 -

Acer Liquid Leap User’s Manual

Model: W1C

This revision: July 2015

Acer Liquid Leap

Model number:_______________________________________________

Serial number: _______________________________________________

Date of purchase: ____________________________________________

Place of purchase: ___________________________________________

Google Play is a trademark of Google Inc.

For more information, please visit: http://go.acer.com/liquidleap.

Important

This manual contains proprietary information that is protected by

copyright laws. The information contained in this manual is subject to

change without notice. Images provided herein are for reference only

and may contain information or features that do not apply to your

device. Acer Group shall not be liable for technical or editorial errors or

omissions contained in this manual.

Table of contents - 3

TABLE OF CONTENTS

Setting up 4

Unpack your Leap device ........................ 4

Charge the battery ...................................... 4

Securing the wristband ............................ 5

Changing the strap...................................... 7

Care and wearing tips ................................. 7

Use with an Android phone 8

Install Acer Leap Manager....................... 8

Download the app....................................... 8

Set up the app............................................. 8

Pair your Leap device and phone............ 9

Sync with the app...................................... 11

Change notification settings...................... 12

Use with an iPhone 13

Install Acer Leap Manager..................... 13

Download the app ..................................... 13

Set up the app........................................... 13

Pairing your Leap device and phone ..... 14

Sync with the app...................................... 16

Changing settings ..................................... 17

Use with a Windows phone 18

Install Acer Leap Manager..................... 18

Download the app..................................... 18

Set up the app .......................................... 18

Pair your Leap device and phone .......... 19

Sync with the app ..................................... 21

Notifications .............................................. 22

Using the Leap device 23

Onscreen information ............................... 23

Troubleshooting 25

Specifications......................................... 27

Display ...................................................... 27

Waterproof certification............................. 27

Sensor ...................................................... 27

Battery ...................................................... 27

System requirements................................ 27

Dimensions ............................................... 27

Weight....................................................... 27

End User License Agreement 28

4 - Setting up

SETTING UP

Unpack your Leap device

Your new smartphone accessory comes packed in a protective box.

Carefully unpack the box and remove the contents. If any of the

following items is missing or damaged, contact your dealer

immediately:

• Your new Acer Leap device

• Charging cradle

•Quick Guide

• Safety leaflet

• Warranty card

• USB cable

Charge the battery

For initial use, you need to charge your Leap device fully. It takes

approximately 90 minutes to fully charge the Leap device. Once it has

charged for the first time, you can charge it as necessary.

1.Place the Leap device into the cradle, lining up the charging

connectors. Ensure the Leap device clicks into the cradle.

Setting up - 5

2.Connect the cradle to your computer using the supplied USB cable.

3.Charge your Leap device for about 90 minutes to charge fully. You

can keep track of the charge progress on the screen.

Securing the wristband

1.Put on the wristband as illustrated.

2.Feed one end of the strap through the loop at the other end of the

strap. Align both ends of the wristband so they are directly

Note

Double-tap the screen to see the charge level.

6 - Setting up

overlapping each other with the clasp over the two holes that best fit

your wrist.

3.Squeeze both the clasp and the wristband between your thumb and

forefinger until the wristband is properly secured.

You’ll know your Leap wristband is securely fastened if both tabs on

the clasp are fully inserted into the wristband.

Setting up - 7

Changing the strap

You can change the strap if desired. Carefully push the Liquid Leap

Active body out of the strap and insert it into the new strap, making

sure it is properly inserted.

Care and wearing tips

Keep the following tips in mind when caring for your Leap device:

• Clean and dry the device regularly, particularly under the band.

• Wear it loosely enough to allow air circulation.

• Use skin care products sparingly on the areas of the wrist covered

by the device.

• If you notice any signs of skin irritation or experience any discomfort,

please discontinue use.

8 - Use with an Android phone

USE WITH AN ANDROID PHONE

Install Acer Leap Manager

Download the app

Open Google Play and search for Acer Leap Manager. Download

and install the app.

Set up the app

Once you have installed the app, you will need to create an account to

complete setup. You can either log in using your Facebook username

and password, or create a new account.

Sign in using Facebook credentials

1.Tap Connect with Facebook.

2.Enter your Facebook login details.

Note

The Leap device requires a smartphone that supports Bluetooth 4.0 and

Android 4.4. Check that your phone meets these requirements before

downloading and installing the app.

Acer does not guarantee that the Leap device will work correctly with devices

that have not been tested by Acer. A list of tested devices is available on the

Acer website, which can be viewed by scanning the QR code on the Leap

device box.

Note

Unlike most Bluetooth accessories, like headsets, your Leap device must be

paired directly through the app, not through your device’s Bluetooth Settings.

Use with an Android phone - 9

Create a new account

1.Tap Sign Up for New Users.

2.Enter a username and password and the other details requested.

Pair your Leap device and phone

Once you have set up the app, you will need to pair it with your Leap

device.

1.Turn on your phone’s Bluetooth from Settings > Bluetooth.

2.Connect your Leap device to its charger cradle.

3.Turn on Acer Leap Manager.

4.Tap Device Settings from the menu (accessible by tapping the

Menu icon in the upper left-hand corner).

10 - Use with an Android phone

5.Select the Leap model you wish to pair. Tap Next and the check

mark as necessary.

6.Four characters will be displayed on the Leap device’s screen, enter

these characters into Acer Leap Manager when requested and

confirm the code is correct. Tap the check mark.

Note

If necessary, your Leap device firmware will be updated. This may take some

time. Be careful to keep your Leap device close to your smartphone until the

update is complete.

Use with an Android phone - 11

Once Acer Leap Manager has connected to your Leap device and any

necessary updates completed, you will see the dashboard.

How do I set my goals?

To change your goals, open the menu from the Leap Manager home

screen and tap Goals. Tap the goal you wish to set, enter the new

value, and then tap Done.

Sync with the app

Your Leap device can sync directly via Bluetooth. Syncing will occur

automatically when you open Acer Leap Manager, as long as

Bluetooth is enabled on your phone.

12 - Use with an Android phone

Change notification settings

You may change what notifications you get via your Leap device by

tapping the Menu icon > Device Settings and then moving the slider

next to each notification to ON or OFF.

Screen item Information

Incoming call: Displays the contact’s name

(if the contact is stored on your phone) or

phone number.

Missed call: Displays the contact’s name (if

the contact is stored on your phone) or phone

number.

Text message: Displays the contact’s name

(if the contact is stored on your phone) or

phone number and shows the message

content.

Note

You will only receive notifications if your smartphone and Leap device are

turned on and connected.

Your Leap device will display notifications for unread messages and missed

calls for up to12 hours.

Notifications are received in real time; meaning you will only get notifications

for messages and calls received while the Leap device and smartphone are

1) within range of each other, 2) turned on, and 3) connected.

Use with an iPhone - 13

USE WITH AN IPHONE

Install Acer Leap Manager

Download the app

Open App Store and search for Acer Leap Manager. Download and

install the app.

Set up the app

Once you have installed the app, you will need to create an account to

complete setup. You can either log in using your Facebook username

and password, or create a new account.

Sign in using Facebook credentials

1.Tap Connect with Facebook.

2.Enter your Facebook login details.

Create a new account

1.Tap Sign Up for New Users.

2.Enter a username and password and the other details requested.

Note

Unlike most Bluetooth accessories, like headsets, your Leap device must be

paired directly through the app, not through your device’s Bluetooth Settings.

14 - Use with an iPhone

Pairing your Leap device and phone

Once you have set up the app, you will need to pair it with your Leap

device.

1.Turn on your phone’s Bluetooth from Settings > Bluetooth.

2.Connect your Leap device to its charger cradle.

3.Turn on Acer Leap Manager.

4.Tap Device Settings from the menu (accessible by tapping the

Menu icon in the upper left-hand corner).

5.Select your device type from the next page.

6.You will be reminded to make sure your Leap device is plugged into

a power source and is displaying a 4-character code. Tap Yes and

follow the onscreen instructions.

Use with an iPhone - 15

7.Enter the four characters into Acer Leap Manager when requested

and tap Next. Confirm the code is correct and tap Yes.

8.You will be asked to give permission for the Leap device to connect

via Bluetooth.

Note

If necessary, your Leap device’s firmware will be updated. This may take

some time. Be careful to keep your Leap device close to your smartphone

until the update is complete.

16 - Use with an iPhone

Once Acer Leap Manager has connected to your Leap device and any

necessary updates completed, you will see the main screen.

How do I set my goals?

To change your goals, open the menu from the Leap Manager home

screen and tap Goals. Tap the goal you wish to set, enter the new

value, and then tap Done.

Sync with the app

Your Leap device can sync directly via Bluetooth. Syncing will occur

automatically when you open Acer Leap Manager, as long as

Bluetooth is enabled on your phone.

Use with an iPhone - 17

Changing settings

You can de-register a device or check for software updates by tapping

the Menu icon > Device Settings.

Note

Only one Leap device can be paired with each smartphone at a time. If you

add a new Leap device, your old one will automatically be de-registered.

Screen item Information

Incoming call: Displays the contact’s name

(if the contact is stored on your phone) or

phone number.

Missed call: Displays the contact’s name (if

the contact is stored on your phone) or phone

number.

Text message: Displays the contact’s name

(if the contact is stored on your phone) or

phone number and shows the message

content.

Note

You will only receive notifications if your smartphone and Leap device are

turned on and connected.

Your Leap device will display notifications for unread messages and missed

calls for up to12 hours.

Notifications are received in real time; meaning you will only get notifications

for messages and calls received while the Leap device and smartphone are

1) within range of each other, 2) turned on, and 3) connected.

18 - Use with a Windows phone

USE WITH A WINDOWS PHONE

Install Acer Leap Manager

Download the app

Open Store and search for Acer Leap Manager. Download and install

the app.

Set up the app

Once you have installed the app, you will need to create an account to

complete setup. You can either log in with an existing username and

password, or create a new account.

Note

The Leap device requires a smartphone that supports Bluetooth 4.0 and

Windows 8 or higher. Check that your phone meets these requirements

before downloading and installing the app.

Acer does not guarantee that the Leap device will work correctly with devices

that have not been tested by Acer. A list of tested devices is available on the

Acer website, which can be viewed by scanning the QR code on the Leap

device box.

Note

Unlike most Bluetooth accessories, like headsets, your Leap device must be

paired directly through the app, not through your device’s Bluetooth Settings.

Use with a Windows phone - 19

Create a new account

1.Tap Sign Up for New Users.

2.Enter a username and password and the other details requested.

Pair your Leap device and phone

Once you have set up the app, you will need to pair it with your Leap

device.

1.Turn on your phone’s Bluetooth by swiping down from the top of the

screen and tapping Settings.

2.Connect your Leap device to its charger cradle.

3.Turn on Acer Leap Manager.

4.Swipe the screen to the left or right until you see the Menu page.

Page is loading ...

Acer W100 User manual

Related papers

Other documents