Gianni Industries DG-100 User manual

Type
User manual

This manual is also suitable for

Gianni Industries Door DG-100: With the DG-100 you have purchased a state-of-the-art digital keypad entry system with split design for high security. The keypad and controller board can be installed separately with a distance of up to 50 meters. The DG-100 has the capacity to store up to 99 individual user PINs with either 5 or 4 digits. The Non-Volatile Memory ensures your codes are stored even after a power outage. For maximum security, an invalid PIN will lock out the system for 60 seconds after 30 incorrect attempts. The random user codes feature provides anti-peeping protection.

Gianni Industries Door DG-100: With the DG-100 you have purchased a state-of-the-art digital keypad entry system with split design for high security. The keypad and controller board can be installed separately with a distance of up to 50 meters. The DG-100 has the capacity to store up to 99 individual user PINs with either 5 or 4 digits. The Non-Volatile Memory ensures your codes are stored even after a power outage. For maximum security, an invalid PIN will lock out the system for 60 seconds after 30 incorrect attempts. The random user codes feature provides anti-peeping protection.

GIANNI INDUSTRIES, INC.
Copyright 2008 Gianni industries, inc. All rights reserved.
DM-CA-DG-100 Ver. D Published on 2008.05.06
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
Management Program environment back its
product quality, performance and commitment
to customer satisfaction.
&
Features
Statement
The product is warranted against defects in material and
workmanship while used in normal service for a period of 1
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.
Warranty
Specifications
Unit: mm
Split of controller and keypad for high security
5 (or 4) digit codes
Allows up to 99 PIN codes
Deftly dimension for narrow jamb
Random user codes for anti-peeping
Fully Programmable via keypad and master code
LED display with audible indication
Non-Volatile Memory
Invalid PIN Lock-out
Metal casting housing with vandal resistant screws
The is a split of keypad and controller board digital
code-operated for access control, allows up to 99 individual
user PINs, user access PINs ensure that all functions
controlled to authorized persons only.
The memory and relay circuitry are located on the
controller board which can be installed in a secure location up
to 50 M away.
The system will shut down for 60 seconds while 30
codes of incorrectly Master Codes enrolled or PIN codes
attempted None beeper signal of keypad activations .Metal
die casting housing with vandal resistant screws to seize
every security measures of the unit.
DG-100
()
Split of units for
controller board and keypad in ranging up to 50 M bring out the
friendly system device for low cost but high security with anti-
tampering as well as convenience and reliability.
Advanced technology made of modern designed for deftly
dimension(keypad)featuring easy installation on to any door
stiles.
20
154
38.8
63
73
Controller Board
Keypad
DG-100
Split Digital Keypad Entry System
1
2
3
4
5
6
7
8
9
0
Operating Voltage: 12 Vdc
Current Draw: Average 15mA, Peak 70mA @ 12Vdc
Output: relays N.O. / N.C./ Com. Output (free voltage
contact)
Relays Rated: 2A MAX @30Vdc 0.4A @ 120Vac
Relay Activation Time:
Strike Time: 1~99 seconds
Strike mode: Access Timer or Latch
User codes capacity: 99 slots
PIN codes: 5 digit codes (4 digit codes available by special
order)
Operating Temperature: -20~+70°C
Ambient Humidity: 5~95% relative humidity non-
condensing
Factory Master Code: 12345 (or 1234)
Invalid PIN Lock-out: Shut down for 60 seconds.
Setting Mode delay Time: 60 seconds.
Pressed Key time delay: 30 seconds.
EPROM: Non-volatile memory, System will retain all
programs and codes after a total loss of power.
Colour: Beige White
Cable Length: 2-meter (#22 AWG)
Distance between the keypad and controller board:
Maximum 50 M (cable#22~26 AWG).
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
Website: gianni.tw
  • Page 1 1

Gianni Industries DG-100 User manual

Type
User manual
This manual is also suitable for

Gianni Industries Door DG-100: With the DG-100 you have purchased a state-of-the-art digital keypad entry system with split design for high security. The keypad and controller board can be installed separately with a distance of up to 50 meters. The DG-100 has the capacity to store up to 99 individual user PINs with either 5 or 4 digits. The Non-Volatile Memory ensures your codes are stored even after a power outage. For maximum security, an invalid PIN will lock out the system for 60 seconds after 30 incorrect attempts. The random user codes feature provides anti-peeping protection.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI