Aeg-Electrolux LR1653 User manual

Brand: Aeg-Electrolux

Model: LR1653

Category: Washing machines

Type: User manual

LAVAMAT LR 1653

User manual Washing machine

Thank you for choosing one of our high-quality products.

To ensure optimal and regular performance of your appliance please read this

instruction manual carefully. It will enable you to navigate all processes perfectly

and most efficiently. To refer to this manual any time you need to, we recommend

you to keep it in a safe place. And please pass it to any future owner of the appliance.

We wish you much joy with your new appliance.

Contents

Operating instructions 3

Safety information 3

General safety 3

Installation 4

Use 4

Child Safety 5

Product description 5

Detergent dispenser drawer 7

Control panel 7

Display 8

The display shows the following

information: 8

Duration of the selected programme 8

Programme progress display 8

Delay start 9

Incorrect option selection 9

Alarm codes 9

End of the programme 9

First use 9

Setting the language 9

Setting the time 10

Personalization 10

Setting the brightness 10

Setting the contrast 10

Setting the acoustic signal 10

Return to main menu 10

Daily use 11

Open the door 11

Select the required programme by means of

selector dial (1) 11

Weight sensor 11

Load the laundry 12

Measure out the detergent and the fabric

softener 12

Select the temperature (button 2) 13

Select the spin speed, Night Cycle or Rinse

Hold option (button 3) 13

Select the desired options by pressing button

4 and confirm your choice by pressing button

5 13

PREWASH 14

STAIN 14

SENSITIVE 14

EXTRA RINSE 14

Select the saving memory option (SAVE

MEMORY) 14

Select the Child Lock option (CHILD LOCK )

Select the TIME option (button 6) (TIME )

Select the START/PAUSE (button 7) (START/

PAUSE ) 16

Select the DELAY START (button 8) (DELAY

START ) 16

Altering an option or a running programme

Interrupting a programme 16

Cancelling a programme 16

Opening the door after the programme has

started 16

At the end of the programme 17

Washing programmes 18

Helpful hints and tips 22

Sorting out the laundry 22

Before loading the laundry 22

Removing stains 22

Detergents and additives 22

Quantity of detergent to be used 23

Degrees of water hardness 23

Care and cleaning 23

Descaling 23

After each wash 23

Maintenance wash 24

Contents

External cleaning 24

Detergent dispenser drawer 24

Washing drum 24

Door seal 25

Drain pump 25

Cleaning the water inlet filters 27

Frost precautions 28

Emergency emptying out 28

What to do if… 28

Technical data 32

Consumption values 32

Installation instructions 33

Installation 33

Unpacking 33

Positioning and levelling 35

Water inlet 35

Water-stop device 37

Water drainage 37

Electrical connection 38

Environment concerns 38

Packaging materials 39

Ecological hints 39

Subject to change without notice

Operating instructions

Safety information

Read carefully & keep for future reference.

• The safety of Your appliance complies with the industry standards and with legal re-

quirements on the safety of appliances. However, as manufacturers, we feel it is our duty

to provide the following safety notes.

• It is most important that this instruction book should be retained with the appliance for

future reference. Should the appliance be sold or transferred to another owner, or should

you move house and leave the appliance, always ensure that the book is supplied with

the appliance in order that the new owner can get to know the functioning of the

appliance and the relevant warnings.

• You MUST read them carefully before installing or using the appliance.

• Before first starting up, check the appliance for any damage incurred during transport.

Never connect up a damaged appliance . If parts are damaged, contact your supplier.

• If the appliance is delivered in the winter months when there are minus temperatures.

Store it at room temperature for 24 hours before using for the first time.

General safety

• It is dangerous to alter the specifications or attempt to modify this product in any way.

• During high temperature wash programmes the door glass may get hot. Do not touch

it!

• Make sure that small pets do not climb into the drum. To avoid this, please check into

the drum before using.

• Any objects such as coins, safety pins, nails, screws, stones or any other hard, sharp

material can cause extensive damage and must not be placed into the machine.

• Only use the advised quantities of fabric softener and detergent. Damage to the fabric

can ensue if you over-fill. Refer to the manufacturer’s recommendations of quantities.

Safety information

132 947 340 - 00 - 502009

• Wash small items such as socks, laces, washable belts etc in a washing bag or pillow case

as it is possible for such items to slip down between the tub and the inner drum.

• Do not use your appliance to wash articles with whalebones, material without hems or

torn material.

• Always unplug the appliance and turn off the water supply after use, cleaning and

maintenance.

• This appliance is provided with a white drum light. It is class 1, in accordance with IEC

60825-1:1993 + A1:1997 + A2:2001 standard. Should the appliance drum light need to

be replaced, this must be carried out by a Service Centre.

• Under no circumstances should you attempt to repair the appliance yourself. Repairs

carried out by inexperienced people may cause injury or serious malfunctioning. Contact

your local Service Centre. Always insist on genuine spare parts.

Installation

• This appliance is heavy. Care should be taken when moving it.

• When unpacking the appliance, check that it is not damaged. If in doubt, do not use it

and contact the Service Centre.

• All packing and transit bolts must be removed before use. Serious damage can occur to

the product and to property if this is not adhered to. See relevant section in the user

manual.

• After having installed the appliance, check that it is not standing on the inlet and drain

hose and the worktop is not pressing the electrical supply cable against the wall.

• If the machine is situated on a carpeted floor, please adjust the feet in order to allow air

to circulate freely under the appliance.

• Always be sure, that there is no water leakage from hoses and their connections after

the installation.

• If the appliance is installed in a location subject to frost, please read the “dangers of

freezing” chapter.

• Any plumbing work required to install this appliance should be carried out by a qualified

plumber or competent person.

• Any electrical work required to install this appliance should be carried out by a qualified

electrician or competent person.

Use

• This appliance is designed for domestic use. It must not be used for purposes other than

those for which it was designed.

• Only wash fabrics which are designed to be machine washed. Follow the instructions on

each garment label.

• Do not overload the appliance. See the Washing Programme Table.

• Before washing, ensure that all pockets are empty and buttons and zips are fastened.

Avoid washing frayed or torn articles and treat stains such as paint, ink, rust, and grass

before washing. Underwired bras must NOT be machine washed.

• Garments which have been in contact with volatile petroleum products should not be

machine washed. If volatile cleaning fluids are used, care should be taken to ensure that

the fluid is removed from the garment before placing in the machine.

• Never pull the power supply cable to remove the plug from the socket; always take hold

of the plug itself.

Safety information

• Never use the appliance if the power supply cable, the control panel, the working surface

or the base are damaged so that the inside of the washing machine is accessible.

Child Safety

• This appliance is not intended for use by person (including children) with reduced physical

sensory or mental capabilities or lack of experience and knowledge unless they have been

given supervision or instruction concerning use of the appliance by a person responsible

for their safety.

• Children should be supervised to ensure that they do not play with the appliance.

• The packaging components (e.g. plastic film, polystyrene) can be dangerous to children

- danger of suffocation! Keep them out of children's reach.

• Keep all detergents in a safe place out of children’s reach.

• Make sure that children or pets do not climb

into the drum. To prevent children or pets

becoming trapped inside the drum the ma-

chine incorporates a special feature. To ac-

tivate this device, rotate the button (without

pressing it) inside the door clockwise until

the groove is horizontal. If necessary use a

coin. To disable this device and restore the

possibility of closing the door, rotate the

button anticlockwise until the groove is ver-

tical.

Product description

Your new appliance meets all modern requirements for effective treatment of laundry with

low water, energy and detergent consumption.

The NEW JET system allows total use of detergent and reduces water consumption so saving

energy.

Product description

1 Detergent dispenser drawer

2 Control panel

3 Drum light

4 Door opening handle

5 Rating plate

6 Drain pump

7 Adjustable feet

Product description

Detergent dispenser drawer

Compartment for detergent used for pre-

wash . The prewash detergent is added at the be-

ginning of the wash programme.

Compartment for powder or liquid detergent

used for main wash .

Compartment for liquid additives (fabric soft-

ener, starch).

Compartment for stain remover used for main

wash with STAIN-option .

Control panel

Below is a picture of the control panel. It shows the programme selector dial as well as the

buttons and the display. These are presented by relevant numbers on the following pages.

1234567 8

1 Programme selector dial

2 TEMPERATURE button (TEMP.)

3 SPIN reduction button (U/MIN. - ESSORAGE)

4 OPTION button (OPTION - OPTIONS)

5 OK button (OK)

6 TIME SAVING button (ZEITSPAREN - TEMPS)

Control panel

7 START/PAUSE button (START/PAUSE - DEPART PAUSE)

8 DELAY START button (ZEITVORWAHL - DEPART DIFFERE)

9 Display

Display

9.1 - This position shows the water temperature of the washing cycle

9.2 - This position shows the selected spin speed and the following options symbols: NIGHT

CYCLE

, RINSE HOLD

9.3 - CHILD SAFETY LOCK symbol

9.4 - TIME SAVING options:

(DAILY), (SUPER QUICK)

9.5 - The symbol of the delayed start (DELAY START)

9.6 - Option symbols: PREWASH

, STAIN , SENSITIVE , EXTRA RINSE

9.7 - End of the programme

9.8 - Washing programme duration or delayed start countdown

9.9 - Information field (several rows show you the programme progress)

The display shows the following information:

Duration of the selected programme

After selecting a programme, the duration of the washing programme 9.8 and the esti-

mated end of cycle 9.7 are displayed in hours and minutes (for example 1.40).

The duration is calculated automatically on the basis of the maximum recommended load

for each type of fabric.

After the programme has started, the time remaining is updated every minute.

Programme progress display

After having pressed the button 7 , the display shows the running phase of the washing

program 9.9 . On the display you can see also the description of the selected type of fabric,

an animated bar, that indicates the carried out cycle and the remaining one, the duration

of the washing program and the end of cycle.

9.9

9.1 9.2 9.3 9.4 9.5

9.6

9.7

9.8

Display

Delay start

If you have selected the button 8 , the relevant symbol 9.5 appears on the display.

After having pressed the button 7 , the selected delay time value (max 20 hours) appears

on the right side of the display with the corrisponding symbol.

The delay time value decreases every minute ( 9.8 ).

Incorrect option selection

If a wrong option is selected the display says that it is not selectable.

Alarm codes

In the event of operating problems, some alarm messages can be displayed, for example:

«Cannot fill water. Please check that the tap is open and then press STAR/PAUSE» (see

chapter «What to do if...»).

End of the programme

When the programme has finished the corresponding message appears on the display. The

button 7 pilot light goes off.

If your laundry is not removed during 10 minutes after the programme is finished, the

backlight of the display switches off and the energy saving system will be enabled.

Only the button 7 pilot light is blinking to indicate that the appliance has to be switched

off.

By pressing any button the appliance will come out from the energy saving status and you

could set another washing programme or swich the appliance off.

First use

• Ensure that the electrical and water connections comply with the installation instruc-

tions.

• Remove the polystyrene block and any material from the drum.

• Before the first wash, run a cotton cycle at the highest temperature without any laundry

in the machine, to remove any manufacturing residue from the drum and tub. Pour 1/2

a measure of detergent into the main wash compartment and start the machine.

Setting the language

When switching on the appliance for the first time, by turning the programme selector dial

1 , you must set the language that you prefer. When the appliance is switched on again all

the messagges in the display will appear in this language.

If the display is not showing any language screen, the appliance has already been switched

on once. In such case, if you would change the language setting, press at the same time

the buttons 2 and 3 for 6 seconds to activate the menu language.

By pressing the button 4 you can scroll all the available languages.

The display says to press the button 5 to confirm the language and then the button 4 to

change the selection.

Press the button 5 twice to confirm your choice.

First use

Setting the time

After the desired language you must set the time before the first wash. Remember to change

the setting time in accordance with daylight-savings time or solar time.

The CLOCK setting permits you to modify/set up the current time. It is important to keep

it updated as the current END Cycle Time depends on it.

To set the time press repeatedly the button 4 to select the settings menu (SETTINGS) and

confirm your choice by pressing button 5 .

With a single and short pressing of the button 4 , the hours can be adjusted.

Press the button 5 to confirm it. Repeat the previous operation for setting the minutes.

If the appliance has already been switched on once, refer to the beginning of «Personali-

zation» chapter.

Personalization

This appliance is provided with a SETTINGS menu that allows you to modify the factory

settings as you want.

When you switch on the machine, by turning the programme selector dial, press the button

4 to activate the OPTIONS menu. By pressing again the same button you can move through

all the available options till when you locate the SETTINGS menu. Press the button 5 to

access in the menu. Use the button 4 again to scroll all the settings and press button 5 to

confirm your choice.

Setting the brightness

The BRIGHTNESS setting allows you to modify the backlight intensity of the display.

By pressing the button 4 , you can increase or decrease the brightness.

You can choose between different levels from 0 to 9 (0 = min. - 9 = max.).

Press button 5 to confirm your choice.

Setting the contrast

The CONTRAST setting allows you to modify the optical characteristic of the display.

By pressing the button 4 you can increase or decrease the contrast.

You can choose between different levels from 0 to 9 (0 = min. - 9 = max.).

Press button 5 to confirm your choice.

Setting the acoustic signal

The machine is provided with an acoustic device, which sounds in the following cases:

• at the end of the programme

• in the event of operating problems

If you wish to activate the acoustic device, press the button 4 in order to select the

BUZZER menu. Press button 5 to confirm your choice. The line around the corresponding

symbol starts blinking in order to indicate that the regulation can be carried out.

Press again the button 4 to activate or deactivate the acoustic signal.

Then press the button 5 to confirm your choice.

Return to main menu

This setting function allows you to return to the option menu.

Personalization

Locate the BACK option by pressing the button 4 .

Press the button 5 to confirm your choice.

Daily use

The appliance is provided with a weight sensor that permits to measure the quantity of

laundry loaded into the drum and advises you on the detergent quantity to use. Before

switching the appliance on, make sure that the drum is empty. If you do not, the washing

will subsequently not be registered properly by the weight sensor. See chapter «Weight

sensor».

Open the door

Open the door by carefully pulling the door handle outwards.

Select the required programme by means of selector dial (1)

The machine is switched on now.

You can choose the right programme for any type of laundry following the descriptions on

the washing programme tables (see «Washing Programmes»).

Turn the programme selector dial to the required programme. The programme selector

determines the type of washing cycle (e.g. water level, drum movement, number of rinses)

and the washing temperature according to the type of laundry.

The pilot light of the button 7 starts blinking and the display shows the programme name

and the duration of the selected programme.

The selector dial can be turned either clockwise or anticlockwise.

Position

to Switching OFF of the machine.

At the end of the programme the selector dial must be turned to position

, to

switch the machine off.

CAUTION!

If you turn the programme selector dial to another programme when the appliance is

working, the display says to turn programme selector in the last used position.

To change a running programme please refer to «Altering an option or a running pro-

gramme».

Weight sensor

After some seconds you switched the appliance on the following indicators appear on the

display if the door is open:

• the maximum load capacity of the selected programme, (i.e. 8 KG for Cottons; see

«Washing Programmes» for the maximum load of each programme),

•

the actual loading from 0.0 KG to the maximum load provided for the selected washing

programme. Loads of less than 0.5 KG are not displayed,

• the animated bar that also fills itself with steps corresponding to 0.5 KG ,

• the detergent quantity recommended for current load expressed as a percentage.

If too much laundry has been loaded into the machine, the display will advise you about

overloading. Remove the exceeding amount of laundry in such cases.

Daily use

Press any button or close the door to let the display show again the information about the

washing programme.

If settings are not undertaken for several seconds during the programme setting process,

the loading information appears on the display when the door is open.

The weight and the detergent quantity displayed for each programme are indicative and

permit to reduce the detergent consumption.

The indicating weight screen won’t appear any more when the door is closed and after the

button 7 has been pressed to start the washing programme.

Load the laundry

1. Place the laundry in the drum, one item at

a time, shaking them out as much as pos-

sible.

2. Close firmly the door. You must hear a

click during closing.

WARNING!

Do not embed the laundry between the door

and the rubber joint.

Measure out the detergent and the fabric softener

Your new appliance was designed to reduce water, energy and detergent consumption.

1. Pull out the dispenser drawer until it

stops. Measure out the amount of deter-

gent required, pour it into the main wash

compartment

and, if you wish to carry

out the prewash phase, pour the deter-

gent into the compartment marked

If you wish to perform the stain function,

pour the stain remover into the compart-

ment

marked with an arrow.

Daily use

2. If required, pour fabric softener into the

compartment marked

(the amount

used must not exceed the MAX mark in

the drawer).

Close the drawer gently.

Select the temperature (button 2)

Press this button repeatedly to increase or decrease the temperature, if you want your

laundry to be washed at a temperature different from the one proposed by the appliance.

The maximum temperatures for each washing programme can be checked in the paragraph

«Washing programmes».

The symbol of cold wash corresponds to

Select the spin speed, Night Cycle or Rinse Hold option (button 3)

When the required programme has been selected, your appliance automatically proposes

the maximum spin speed provided for that programme.

Press this button repeatedly to change the spin speed, if you want your laundry to be spun

at a speed different from the one proposed by the appliance.

RINSE HOLD: by selecting this option the water of the last rinse is not emptied out to prevent

the fabrics from creasing.

NIGHT CYCLE: by selecting this option, the machine will not drain the water of the last

rinse, so as not to wrinkle the laundry. As all spinning phases are suppressed, this washing

cycle is very noiseless and it can be selected at night or in times with a more economical

power rate. On some programmes the rinses will be performed with more water.

To empty out the water, please read «At the end of the programme» section in this

chapter.

For the compatibility between options and washing programmes consult the chapter

«Washing programmes».

Select the desired options by pressing button 4 and confirm your choice by

pressing button 5

Depending on the programme, different functions can be combined.

Not all the options are compatible between themselves. The symbols and messages of the

incompatible options are not displayed.

Anyway, if an option, which is not compatible with the set washing programme or any

other option, is selected, the display says that is not selectable.

Daily use

You must select the options after you have selected the programme but before pressing

the button 7 . Press the button 4 to activate the option menu.

To scroll all the available options, press the button 4 . The corresponding programme name

appears in the relative rectangle to indicate that this programme can be selected.

Press the button 4 to activate and the button 5 to confirm your choice. The corresponding

symbol appears on the right side of the display to indicate that this option has been set.

Press the button 4 to deactivate the option.

After selecting the options, wait about 10 seconds until the display gets back to the default

status. The selected options appear on the display.

For the compatibility between this option and washing programmes consult the chapter

«Washing programmes».

PREWASH

Select this option if you wish your laundry to be prewashed at 30°C before the main wash.

The prewash phase ends with a short spin in programmes for cotton and synthetic fabrics,

whereas in the programmes for delicate fabrics the water is only drained.

The relevant symbol will appear on the display.

This option is recommended for heavily soiled laundry.

STAIN

Select this option to treat heavily soiled or stained laundry with stain remover (extended

main wash with time optimized stain action phase). The relevant symbol will appear on the

display.

This option is not available with a temperature lower than 40°C.

If you wish to perform a programme with the stain option, pour stain remover into stain

compartment

SENSITIVE

By selecting this option the washing intensity will be reduced. The machine adds one rinse

in the programmes for cottons and synthetics. The relevant symbol will appear on the

display.

This option cannot be selected together with Extra Rinse option.

This option is recommended for non fast coloured items and for frequently washed items.

EXTRA RINSE

This appliance is designed for saving water. However, for people with a very delicate skin

(allergic to detergents) it may be necessary to rinse the laundry using an extra quantity of

water.

The relevant symbol will appear on the display.

Select the saving memory option (SAVE MEMORY)

Programme settings that are frequently used can be saved (e.g. cotton, 60°C, 1600 rpm,

with PREWASH and EXTRA RINSE).

There are 2 memory spaces available for this purpose in the last 2 positions of the pro-

gramme selector dial. The saved programme can be selected in the same way as any other

wash programme by means of the selector dial.

Saving Memory:

Daily use

• select the desired programme and required options

•

press the button 4 to activate the options menu

•

by pressing the button 4 , locate the saving memoy option and press button 5

•

by pressing the button 4 select the number of the memory (MEMORY) (1-2) in which

you wish memorize your customized programme.

•

press the button 5 to save the selected programme. The display says that the programme

has been saved.

To change the memorized programme setting repeat the procedure from the beginning.

If the memory space is already used by a programme previously selected, the display says

that the memory is full and to press the button 5 to over-write or the button 4 to cancel.

Press then button 5 to memorize the new programme.

The memorized programmes cannot be erased, but you can only over-write them with

another washing programme setting.

Select the Child Lock option (CHILD LOCK )

Your appliance is provided with CHILD SAFETY LOCK , which permits you to leave the

appliance unattended and not to worry that children might be injured by or cause damage

to the appliance . Set this option before pressing the button 7 and after having selected

the required programme wash.

This function remains able also when the appliance is not working.

Setting Child lock option:

•

press the button 4 to activate the options menu,

•

press the button 4 to locate the CHILD LOCK option,

•

press the button 5 to enable this option. The corresponding symbol appears on the

display. The display says to press the button 4 and 5 together for 5 seconds to unlock

the appliance.

If you press any button after the programme has started with CHILD LOCK enabled, the

display will say that the appliance is locked and to use the key combination to unlock it.

At the end of the programme it is necessary to press simultaneously the button 4 and the

button 5 for 5 seconds until the display will say that the appliance is unlocked.

This function stays permanently on. To disable it, refer to Setting Child Lock option .

Select the TIME option (button 6) (TIME )

The appliance proposes by default the washing cycle for normally soiled laundry. The

washing cycle time can be reduced by means of this button.

This option can be selected with the washing programmes for COTTONS, SYNTHETICS and

DELICATES.

By pressing this button once, the corresponding symbol and the message «DAILY» (DAILY )

appear on the display and you will be able to reduce the cycle duration . The display will

show the reduced washing time. To be used for lightly soiled laundry.

By pressing this button twice, the corresponding symbol and the message «SUPER

QUICK» (SUPER QUICK) will appear on the display and you will be able to reduce the cycle

duration. The display will show the reduced washing time.

To be used only for very lightly soiled laundry.

Daily use

Select the START/PAUSE (button 7) (START/PAUSE )

Press this button, to start the selected programme. The corresponding red pilot light stops

blinking.

On the display will appear the name and the running phase of the selected programme to

indicate that the appliance starts operating and the door is locked.

To interrupt a programme which is running, press the button 7 : the corresponding red

pilot light starts to flash, while the display says that the appliance is in pause.

To restart the programme from the point at which it was interrupted, press the button 7

again.

If you have chosen a delayed start, the machine will begin the countdown.

Select the DELAY START (button 8) (DELAY START )

This option makes it possible to delay the starting of the washing programme by 30, 60, 90

minutes, 2 hours and then by 1 hour till 20 hours.

Selecting the delay time:

• Select the programme and the required options,

•

Select the desired delay time by pressing the button 8 , the display shows the delay value

and the relevant symbol 9.5 .

The estimated end of the programme time is displayed in 9.7 .

•

Press the button 7 : the machine starts its countdown displayed in 9.8 . The programme

will start after the selected delay has expired.

You can cancel the delay time at any moment, before you press the button 7 .

Cancelling the delayed start:

•

set the appliance to PAUSE by pressing the button 7 ,

•

press the button 8 until the symbol

disappears on the display,

•

press the button 7 again to start the programme.

The DELAY START option can not be selected with DRAIN or SPIN programmes.

Altering an option or a running programme

It is possible to change some options before the programme carries them out. Before you

make any change, you must pause the appliance by pressing the button 7 .

Changing a running programme is possible only by resetting it . Turn the programme

selector dial to

and then to the new programme position. Press the button 5 to cancel

the previous washing programme. Start the new programme by pressing the button 7 again.

The washing water in the tub will be not emptied out.

Interrupting a programme

Press the button 7 to interrupt a programme which is running, the corresponding light

starts blinking. Press the same button again to restart the programme.

Cancelling a programme

Turn the selector dial to and then in the new selected programme.

Press the button 5 to cancel the programme which is running.

Now press the button 7 to start the new programme.

Opening the door after the programme has started

First set the machine to Pause by pressing the button 7 .

Daily use

• If the display says that the appliance is in pause, the door can be opened

• If the display says alternately that the appliance is in pause and the door is locked, this

means that the machine is already heating, that the water level is above the bottom

edge of the door or that the drum is turning: in this case the door can not be opened

• If you cannot open the door but you need to open it you have to switch the machine

off by turning the selector dial to

. After about some minutes the door can be opened

(pay attention to the water level and temperature!) .

After closing the door, it is necessary to select the previous programme again and to press

the button 7 , the machine will resume the programme from the point where it had been

interrupted.

At the end of the programme

The machine stops automatically. The pilot light of the button 7 goes off, a static

appears on the display and the acoustic signal sounds for some minutes.

If the RINSE HOLD or NIGHT CYCLE option has been selected, the pilot light of the button

7 goes off, the display says that the door is locked and the RINSE HOLD option has been

selected, the door is blocked to indicate that the water must be emptied out.

Please follow the below instructions to empty out the water:

•

turn the programme selector dial to

/OFF,

•

select the DRAINING or SPINNING programme and confirm it by pressing button 5 ,

• reduce the spin speed if needed, by means of the relevant button,

•

press the button 7 ,

• when the programme has finished the display shows a static

and the display says

that the programme is finished. The door can be opened.

Turn the programme selector dial to

/OFF to switch the machine off. Remove the laundry

from the drum and carefully check that the drum is empty.

If you do not intend to carry out another wash, close the water tap. Leave the door open

to prevent the formation of mildew and unpleasant smells.

Stand by : once the programme has finished after a few minutes the energy saving system

will be enabled. The brightness of the display is reduced. By pressing any button the ap-

pliance will come out of the energy saving status.

Washing programmes

Programme

Maximum and Minimum Temperature

Cycle Description

Maximum Fabrics Load

Type of Laundry

Options

Detergent

Compartment

COTTONS/LINEN (KOCH-/BUNTWÄSCHE - BLANC

COULEURS)

95°- Cold

Main wash - Rinses - Long spin

Max. load 8 kg - Reduced load 4 kg

Maximum spin speed at 1600 rpm

For white and coloured cotton (normally soiled

items).

SPIN REDUCTION -

NIGHT CYCLE - RINSE

HOLD - PREWASH

STAIN

- EXTRA

RINSE - SENSITIVE -

TIME SAVING

HYGIENE

60°

Main wash - Rinses - Long spin

Max. load 8 kg

Maximum spin speed at 1600 rpm

The washing programme for white cottons. This pro-

gram eliminates the micro-organisms thanks to the

washing by 60°C and an additional rinse. In this way

the action is more effective. Put into the compart-

ment Stain a special additive for hygiene and select

the option Stain.

SPIN REDUCTION -

RINSE HOLD - PRE-

WASH

- STAIN

40- 60 MIX

40°

Main wash - Rinses - Long spin

Max. load 8 kg

Maximum spin speed at 1600 rpm

White and coloured cotton This programme can be

used for laundry, which should be washed at 40°C or

60°C separately. The maximum load capacity can be

put into the drum in order to save energy and water.

The same good washing result will be obtained as for

normal programme at 60°C.

SPIN REDUCTION -

NIGHT CYCLE - RINSE

HOLD - PREWASH

STAIN - SENSITIVE -

EXTRA RINSE

JEANS

60° - Cold

Main wash - Rinses - Long spin

Max. load 8 kg

Maximum spin speed at 1200 rpm

With this programme it is possible to wash items like

pants, shirts or jackets in Jeans and also jersey realized

with hi-tech materials. (The Extra Rinse option will be

activated automatically).

SPIN REDUCTION -

NIGHT CYCLE - RINSE

HOLD - PREWASH

Washing programmes

Programme

Maximum and Minimum Temperature

Cycle Description

Maximum Fabrics Load

Type of Laundry

Options

Detergent

Compartment

SYNTHETICS (PFLEGELEICHT - SYNTHETIQUES)

60°- Cold

Main wash - Rinses - Short spin

Max. load 4 kg - Reduced load 2 kg

Maximum spin speed at 1200 rpm

Synthetic or mixed fabrics: underwear, coloured

garments, non-shrink shirts, blouses.

SPIN REDUCTION -

NIGHT CYCLE - RINSE

HOLD - PREWASH

STAIN

- EXTRA

RINSE - SENSITIVE -

TIME SAVING

EASY IRON (LEICHTBÜGELN PLUS - REPAS. FACILE

PLUS)

60°- Cold

Main wash - Rinses - Short spin

Max. load 2 kg

Maximum spin speed at 1200 rpm

Synthetic fabrics to be gentle washed and spun.

Selecting this programme the laundry is gently wash-

ed and spun to avoid any creasing. In this way ironing

is easier. Furthermore the machine will perform ad-

ditional rinses.

SPIN REDUCTION -

RINSE HOLD - PRE-

WASH - EXTRA RINSE

DELICATES (FEINWÄSCHE - DELICATS)

40°- Cold

Main wash - Rinses - Short spin

Max. load kg 4 - Reduced load 2 kg

Maximum spin speed at 1200 rpm

Delicate fabrics: acrylics, viscose, polyester.

SPIN REDUCTION -

NIGHT CYCLE - RINSE

HOLD - PREWASH

STAIN

- EXTRA

RINSE - TIME SAVING

BLANKET (DAUNEN - COUETTE)

40°- 30°

Main wash - Rinses - Short spin

Max. load kg 2,5

Maximum spin speed at 800 rpm

Special programme for a single synthetic blanket, du-

vet, bedspread and so on.

SPIN REDUCTION

DELICATE RINSES (FEINSPÜLEN - RINCAGES DEL-

ICATS)

Rinses - Short spin

Max. load 4 kg

Maximum spin speed at 1200 rpm

With this programme it is possible to rinse and spin

cotton garments which have been washed by hand.

The machine performs some rinses, followed by a final

spin.

SPIN REDUCTION -

NIGHT CYCLE - RINSE

HOLD - EXTRA RINSE

DRAIN (PUMPEN - VIDANGE)

Draining of water

For emptying out the water of the last rinse in pro-

grammes with the Rinse Hold option selected.

Washing programmes

Programme

Maximum and Minimum Temperature

Cycle Description

Maximum Fabrics Load

Type of Laundry

Options

Detergent

Compartment

SPIN (SCHLEUDERN - ESSORAGE)

Drain and long spin

Max. load 8 kg

Maximum spin speed at 1600 rpm

Separate spin for hand washed cotton garments and

after programmes with the Rinse Hold option selec-

ted. Before selecting this programme the selector dial

must be turned to

. You can choose the spin speed

by pressing the relevant button to adapt it to the

fabrics to be spun.

SPIN REDUCTION

WOOL PLUS - HANDWASH (WOLLE PLUS -

LAINE PLUS)

40° - Cold

Main wash - Rinses - Short spin

Max. load 2 kg; Max. load for silk: 1 kg

Maximum spin speed at 1200 rpm

Washing programme for machine washable wool as

well as for hand washable woollens and delicate fab-

rics. Note : A single or bulky item may cause imbal-

ance. If the appliance doesn’t perform the final spin

phase, add more items, redistribute the load manually

and then select the spinning programme.

SPIN REDUCTION -

NIGHT CYCLE - RINSE

HOLD

LINGERIE (DESSOUS -LINGERIE)

40° - Cold

Main wash - Rinses - Short spin

Max. load 1 kg

Maximum spin speed at 1200 rpm

This programme is suitable for very delicate items, as

lingerie, bras and underwear etc.

SPIN REDUCTION -

NIGHT CYCLE - RINSE

HOLD

OUTDOOR SPORTS (OUTDOOR - BLOUSONS)

40° - Cold

Main wash - Rinses - Short spin

Max. load 2,5 kg

Maximum spin speed at 800 rpm

Special program for sport clothes. By selecting this

programme, do not add any additives.

SPIN REDUCTION -

RINSE HOLD - EXTRA

RINSE

20 MIN.-3 KG

30°

Main wash - Rinses - Short spin

Max. load 3 kg

Maximum spin speed at 1200 rpm

This programme may be used for a quick washing of

sport items or cotton and synthetic items , lightly

soiled or worn once.

SPIN REDUCTION

Washing programmes

Page is loading ...

Aeg-Electrolux LR1653 User manual

Brand: Aeg-Electrolux

Model: LR1653

Category: Washing machines

Type: User manual

Download PDF

report

Aeg-Electrolux LR1653 User manual

Aeg-Electrolux LR1653 User manual

Related papers

Other documents