Electrolux EWS106110W User manual

Category
Washing machines
Type
User manual

This manual is also suitable for

EWS 86110W
EWS 106110W
................................................ .............................................
EN WASHING MACHINE USER MANUAL
Electrolux. Thinking of you.
Share more of our thinking at www.electrolux.com
CONTENTS
Safety information 2
Product description 4
Control panel 5
First use 7
Daily use 7
Helpful hints and tips 9
Washing programmes 11
Care and cleaning 13
What to do if… 16
Technical data 18
Consumption values 19
Installation 20
Electrical connection 22
Environment concerns 22
Subject to change without notice.
SAFETY INFORMATION
Important! Read carefully & keep for future
reference.
The safety of Your appliance complies
with the industry standards and with legal
requirements on the safety of appliances.
However, as manufacturers, we feel it is
our duty to provide the following safety
notes.
It is most important that this instruction
book should be retained with the appli-
ance for future reference. Should the ap-
pliance be sold or transferred to another
owner, or should you move house and
leave the appliance, always ensure that
the book is supplied with the appliance in
order that the new owner can get to
know the functioning of the appliance
and the relevant warnings.
You MUST read them carefully before in-
stalling or using the appliance.
Before first starting up, check the appli-
ance for any damage incurred during
transport. Never connect up a damaged
appliance . If parts are damaged, contact
your supplier.
If the appliance is delivered in the winter
months when there are minus tempera-
tures. Store it at room temperature for 24
hours before using for the first time.
GENERAL SAFETY
It is dangerous to alter the specifications
or attempt to modify this product in any
way.
During high temperature wash pro-
grammes the door glass may get hot. Do
not touch it!
Make sure that small pets and children
do not climb into the drum. To avoid this,
please check into the drum before using.
Any objects such as coins, safety pins,
nails, screws, stones or any other hard,
sharp material can cause extensive dam-
age and must not be placed into the ma-
chine.
Only use the advised quantities of fabric
softener and detergent. Damage to the
fabric can ensue if you over-fill. Refer to
the manufacturer’s recommendations of
quantities.
Wash small items such as socks, laces,
washable belts etc in a washing bag or
pillow case as it is possible for such
items to slip down between the tub and
the inner drum.
Do not use your washing machine to
wash articles with whalebones, material
without hems or torn material.
Always unplug the appliance and turn off
the water supply after use, cleaning and
maintenance.
Under no circumstances should you at-
tempt to repair the machine yourself. Re-
pairs carried out by inexperienced people
may cause injury or serious malfunction-
ing. Contact your local Service Centre.
Always insist on genuine spare parts.
INSTALLATION
This appliance is heavy. Care should be
taken when moving it.
2 electrolux
When unpacking the appliance, check
that it is not damaged. If in doubt, do not
use it and contact the Service Centre.
All packing and transit bolts must be re-
moved before use. Serious damage can
occur to the product and to property if
this is not adhered to. See relevant sec-
tion in the user manual.
After having installed the appliance,
check that it is not standing on the inlet
and drain hose and the worktop is not
pressing the electrical supply cable
against the wall.
If the machine is situated on a carpeted
floor, please adjust the feet in order to al-
low air to circulate freely under the appli-
ance.
Always be sure, that there is no water
leakage from hoses and their connec-
tions after the installation.
If the appliance is installed in a location
subject to frost, please read the “dangers
of freezing” chapter.
Any plumbing work required to install this
appliance should be carried out by a
qualified plumber or competent person.
Any electrical work required to install this
appliance should be carried out by a
qualified electrician or competent person.
USE
This appliance is designed for domestic
use. It must not be used for purposes
other than those for which it was de-
signed.
Only wash fabrics which are designed to
be machine washed. Follow the instruc-
tions on each garment label.
Do not overload the appliance. See the
Washing Programme Table.
Before washing, ensure that all pockets
are empty and buttons and zips are fas-
tened. Avoid washing frayed or torn arti-
cles and treat stains such as paint, ink,
rust, and grass before washing. Under-
wired bras must NOT be machine wash-
ed.
Garments which have been in contact
with volatile petroleum products should
not be machine washed. If volatile clean-
ing fluids are used, care should be taken
to ensure that the fluid is removed from
the garment before placing in the ma-
chine.
Never pull the power supply cable to re-
move the plug from the socket; always
take hold of the plug itself.
Never use the appliance if the power
supply cable, the control panel, the work-
ing surface or the base are damaged so
that the inside of the washing machine is
accessible.
CHILD SAFETY
This appliance is not intended for use by
person (including children) with reduced
physical sensory or mental capabilities or
lack of experience and knowledge unless
they have been given supervision or in-
struction concerning use of the appliance
by a person responsible for their safety.
Children should be supervised to ensure
that they do not play with the appliance.
The packaging components (e.g. plastic
film, polystyrene) can be dangerous to
children - danger of suffocation! Keep
them out of children's reach.
Keep all detergents in a safe place out of
children’s reach.
Make sure that children or pets do not
climb inside the drum. To prevent chil-
dren or pets becoming trapped inside the
drum the machine incorporates a special
feature. To activate this device, rotate the
button (without pressing it) inside the
door clockwise until the groove is hori-
zontal. If necessary use a coin. To disable
this device and restore the possibility of
closing the door, rotate the button anti-
clockwise until the groove is vertical.
electrolux 3
PRODUCT DESCRIPTION
Your new appliance meets all modern requirements for effective treatment of laundry
with low water, energy and detergent consumption. Its new washing system allows to-
tal use of detergent and reduces water consumption so saving energy.
4
5
1
2
3
6
1
Detergent dispenser drawer
2
Control panel
3
Door opening handle
4
Rating Plate
5
Drain pump
6
Adjustable feet
DETERGENT DISPENSER DRAWER
Compartment for detergent used for
prewash and soak phase or for stain re-
mover used during the stain action phase (if
available). The prewash and soak detergent
is added at the beginning of the wash pro-
gramme. The stain remover is added dur-
ing the stain action phase.
Compartment for powder or liquid de-
tergent used for main wash. If using liquid
detergent pour it just before starting the
programme.
Compartment for liquid additives (fabric
softener, starch).
Follow the product manufacturer’s recom-
mendations on quantities to use and do not
exceed the «MAX» mark in the detergent
dispenser drawer. Any fabric softener or
starching additives must be poured into the
compartment before starting the wash pro-
gramme.
PROGRAMME GUIDE
The programme guide is on the front side of
the detergent dispenser drawer.
Other programme guides in different lan-
guages are in the user manual bag. (Not all
appliances have more than one programme
guide).
To replace the programme guide:
1. Pull it out from the right side and re-
move it.
4 electrolux
2. Put in the new programme guide.
CONTROL PANEL
Below is a picture of the control panel. It shows the programme selector dial as well as
the buttons and the pilot lights. These are presented by relevant numbers on the fol-
lowing pages.
1 2 3 4 5 6 7
1
PROGRAMME selector dial
2
SPIN reduction button
3
OPTIONS button
4
EXTRA RINSE button
5
START/PAUSE button
6
DELAY START button
7
Pilot Lights
PROGRAMME SELECTOR DIAL
It allows you to switch the appliance on/off
and/or to select a programme.
SPIN SPEED REDUCTION
By pressing this button you can reduce the
maximum spin speed allowed for the selec-
ted programme or to select the available
option(s).
NO SPIN
By selecting this option, all spinning phases
are suppressed and replaced by a drain, so
as not to wrinkle the laundry. Recommen-
ded for extremely delicate fabrics. On some
programmes the rinses will be performed
with more water.
RINSE HOLD
By selecting this function the water of the
last rinse is not emptied out to prevent the
fabrics from creasing. Before opening the
door it will be necessary to empty out the
water. To empty out the water, please read
the paragraph «At the end of the pro-
gramme».
PREWASH
By selecting this option the machine per-
forms a prewash cycle before the main
wash phase. The washing time will be pro-
longed. This option is recommended for
heavily soiled laundry.
DAILY
By pressing this button the washing dura-
tion will be reduced. To be used for lightly
soiled laundry.
SUPER QUICK
Short cycle for lightly soiled items or for
laundry which needs only freshening up.
We recommend you to reduce the fabrics
loading.
EXTRA RINSE
This appliance is designed to save energy.
If it necessary to rinse the laundry using an
electrolux 5
extra quantity of water (extra rinse), select
this option. Some additional rinses will be
performed. This option is recommended for
people who are allergic to detergents, and
in areas where the water is very soft.
START PAUSE
This button allows you to start or to inter-
rupt the selected programme.
DELAY START
The start of the programme can be delayed
by 3, 6 or 9 hours by means of this button.
INDICATOR PILOT LIGHTS
7.1
7.2
7.3
When switching on the appliance, both pilot
lights 7.1 (Prewash/Wash) and 7.2 (Rinse/
Spin) illuminate. After you have pressed the
button 5, the only light corresponding to the
running phase remains lit.
If you select the draining programme any
light will illuminate.
At the end of the cycle the light 7.3 (End) il-
luminates and, if there is not water left in
the tub, the door can be opened.
TABLE OF SYMBOLS
= Cottons = Economy
= Cold = Synthetics
= Delicates = Special programmes
= Wool = Handwash
= Rinse = Drain
= Spin =Miniprogramme
= Rinse Hold = No spin
= Options = Super Quick
= Daily = Prewash
= Extra Rinse = Start/Pause
= End of Cycle = Washing phase
= Delay Start
6 electrolux
FIRST USE
Ensure that the electrical and water
connections comply with the installa-
tion instructions.
Ensure that the drum is empty.
Pour 2 liters of water into the main
wash compartment
of the deter-
gent drawer in order to activate the
ECO valve. Then run a cotton cycle
at the highest temperature without
any laundry in the machine, to re-
move any manufacturing residue
from the drum and tub. Pour 1/2 a
measure of detergent into the main
wash compartment and start the
machine.
DAILY USE
Load the laundry
Open the door by carefully pulling the door
handle outwards. Place the laundry in the
drum, one item at a time, shaking them out
as much as possible. Close the door.
Make sure that no laundry stays between
the seal and the door. There is a risk of wa-
ter leakage or damage to the laundry.
Measure out the detergent and the fab-
ric softener
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent re-
quired, pour it into the main wash compart-
ment
or in the appropriate compartment
if the selected programme/option it requires
(see more details in «Detergent dispenser
drawer»).
If required, pour fabric softener into the
compartment marked
(the amount used
must not exceed the «MAX» mark in the
drawer). Close the drawer gently.
SELECT THE REQUIRED PROGRAMME
BY TURNING THE PROGRAMME
SELECTOR DIAL (1)
Turn the programme selector dial to the re-
quired programme. The washing machine
will automatically select the maximum spin
value provided for the programme you have
chosen. You can change this value by
pressing the corresponding button. The
green pilot light of the button 5 starts to
flash.
The selector dial can be turned either clock-
wise or counterclockwise. Turn to position
to reset programme/Switching the ma-
chine off.
At the end of the programme the selec-
tor dial must be turned to position
,
to switch the machine off.
electrolux 7
Caution! If you turn the programme
selector dial to another programme
when the machine is working, the red
pilot light of button 5 will blink 3 times
to indicate a wrong selection. The
machine will not perform the new
selected programme.
REDUCE THE SPIN SPEED BY
PRESSING BUTTON 2
By selecting a programme, the appliance
proposes automatically the maximum spin
speed provided for that programme.
Press button 2 repeatedly to change the
spin speed, if you want your laundry to be
spun at a different speed. The relevant light
illuminates.
SELECT THE AVAILABLE OPTIONS BY
PRESSING BUTTONS 2, 3 AND 4
Depending on the programme, different
functions can be combined. These must be
selected after choosing the desired pro-
gramme and before starting the pro-
gramme.
When these buttons are pressed, the corre-
sponding pilot lights illuminate. When they
are pressed again, the pilot lights go out. If
an incorrect option is selected, the integra-
ted red pilot light of the button 5 flashes 3
times.
For the compatibility among the wash-
ing programmes and the options see
chapter «Washing Programmes».
SELECT THE DELAY START BY
PRESSING BUTTON 6
Before you start the programme, if you wish
to delay the start, press the button 6 re-
peatedly, to select the desired delay. The
relevant light illuminates.
You must select this option after you have
set the programme and before you start the
programme.
You can cancel or modify the delay time at
any moment, before you press button 5.
Selecting the delayed start:
1. Select the programme and the required
options.
2. Select the delay start by pressing the
button 6.
3. Press button 5:
the machine starts its hourly count-
down.
The programme will start after the
selected delay has expired.
Cancelling the delayed start after having
started the programme:
1. Set the washing machine to PAUSE by
pressing button 5.
2. Press button 6 once, the light relevant
to the selected delay goes off
3. Press button 5 again to start the pro-
gramme.
The Delay Start can not be selected with
DRAIN programme.
Important! The selected delay can be
changed only after selecting the washing
programme again.
The door will be locked throughout the de-
lay time. If you need to open the door, you
must set the machine to PAUSE (by press-
ing the button 5) and then wait a few mi-
nutes. After you have closed the door,
press the button 5 again.
START THE PROGRAMME BY
PRESSING BUTTON 5
To start the selected programme, press the
button 5, the corresponding green pilot light
stops blinking. The pilot lights 7.1 and 7.2
illuminate to indicate that the appliance
starts operating and the door is locked.
To interrupt a programme which is running,
press the button 5: the corresponding
green pilot light starts blinking.
To restart the programme from the point at
which it was interrupted, press the button 5
again. If you have chosen a delayed start,
the machine will begin the countdown.
If an incorrect option is selected, the red pi-
lot light of the button 5 blinks for 3 times.
ALTERING AN OPTION OR A RUNNING
PROGRAMME
It is possible to change some options be-
fore the programme carries them out.
Before you make any change, you must
PAUSE the appliance by pressing the but-
ton 5.
Changing a running programme is possible
only by resetting it. Turn the programme se-
lector dial to
and then to the new pro-
gramme position. Start the new programme
8 electrolux
by pressing the button 5 again. The wash-
ing water in the tub will be not emptied out.
INTERRUPTING A PROGRAMME
Press the button 5 to interrupt a pro-
gramme which is running, the correspond-
ing green pilot light starts blinking.
Press the button again to restart the pro-
gramme.
CANCELLING A PROGRAMME
Turn the selector dial to
to cancel a pro-
gramme which is running.
You can select now a new programme.
OPENING THE DOOR
After the programme has started (or during
the delay time) the door is locked, if you
need to open it, set first the machine to
PAUSE by pressing the button 5. After a
few minutes it will be possible to open the
door.
If the door remains locked, this means that
the machine is already heating or that the
water level is too high. In any case, do not
force the door!
If you cannot open the door but you need
to open it you have to switch the machine
off by turning the selector dial to
. After a
few minutes the door can be opened (pay
attention to the water level and temper-
ature!).
After closing the door, it is necessary to se-
lect the programme and options again and
to press button 5.
AT THE END OF THE PROGRAMME
The machine stops automatically. The light
of button 5 and the lights corresponding to
the finished phases go out. The 7.3 light il-
luminates to indicate that the cycle is finish-
ed. In a few minutes it will be possible to
open the door.
If you have set a programme or an option
that ends with water in the tub, the door re-
mains locked. Before you open the door
you must empty the water out.
The drum continues to turn at regular inter-
vals until water drain.
Follow the below instructions to empty out
the water:
1.
Turn the programme selector dial to
.
2. Select the draining or spinning pro-
gramme.
3. Reduce the spin speed if needed, by
pressing the relevant button.
4. Press button 5.
At the end of the programme, the light 7.3
illuminates to indicate that the cycle is fin-
ished. The door can be now opened. Turn
the programme selector dial to
to switch
the machine off.
Remove the laundry from the drum and
carefully check that the drum is empty. If
you do not intend to carry out another
wash, close the water tap. Leave the door
open to prevent the formation of mildew
and unpleasant smells.
Stand by: once the programme has
finished after a few minutes the energy
saving system is enabled with the pilot
lights switched on. By pressing any
button the appliance will come out of
the energy saving status.
HELPFUL HINTS AND TIPS
SORTING OUT THE LAUNDRY
Follow the wash code symbols on each
garment label and the manufacturer’s
washing instructions. Sort the laundry as
follows: whites, coloureds, synthetics, deli-
cates, woollens.
BEFORE LOADING THE LAUNDRY
Never wash whites and coloureds together.
Whites may lose their «whiteness» in the
wash.
New coloured items may run in the first
wash; they should therefore be washed
separately the first time.
Button up pillowcases, close zip fasteners,
hooks and poppers. Tie any belts or long
tapes.
electrolux 9
Remove persistent stains before washing.
Rub particularly soiled areas with a special
detergent or detergent paste.
Treat curtains with special care. Remove
hooks or tie them up in a bag or net.
REMOVING STAINS
Stubborn stains may not be removed by
just water and detergent. It is therefore ad-
visable to treat them prior to washing.
Blood: treat fresh stains with cold water.
For dried stains, soak overnight in water
with a special detergent then rub in the
soap and water.
Oil based paint: moisten with benzine
stain remover, lay the garment on a soft
cloth and dab the stain; treat several times.
Dried grease stains: moisten with turpen-
tine, lay the garment on a soft surface and
dab the stain with the fingertips and a cot-
ton cloth.
Rust: oxalic acid dissolved in hot water or a
rust removing product used cold. Be careful
with rust stains which are not recent since
the cellulose structure will already have
been damaged and the fabric tends to hole.
Mould stains: treat with bleach, rinse well
(whites and fast coloureds only).
Grass: soap lightly and treat with bleach
(whites and fast coloureds only).
Ball point pen and glue: moisten with
acetone
1)
, lay the garment on a soft cloth
and dab the stain.
Lipstick: moisten with acetone as above,
then treat stains with methylated spirits.
Treat any residual marks with bleach.
Red wine: soak in water and detergent,
rinse and treat with acetic or citric acid,
then rinse. Treat any residual marks with
bleach.
Ink: depending on the type of ink, moisten
the fabric first with acetone
1)
, then with
acetic acid; treat any residual marks on
white fabrics with bleach and then rinse
thoroughly.
Tar stains: first treat with stain remover,
methylated spirits or benzine, then rub with
detergent paste.
DETERGENTS AND ADDITIVES
Good washing results also depend on the
choice of detergent and use of the correct
quantities to avoid waste and protect the
environment.
Although biodegradable, detergents contain
substances which, in large quantities, can
upset the delicate balance of nature.
The choice of detergent will depend on the
type of fabric (delicates, woollens, cottons,
etc.), the colour, washing temperature and
degree of soiling.
All commonly available washing machine
detergents may be used in this appliance:
powder detergents for all types of fabric
powder detergents for delicate fabrics
(60°C max) and woollens
liquid detergents, preferably for low tem-
perature wash programmes (60°C max)
for all types of fabric, or special for wool-
lens only.
The detergent and any additives must be
placed in the appropriate compartments of
the dispenser drawer before starting the
wash programme.
If using liquid detergents, a programme
without prewash must be selected.
Your appliance incorporates a recirculation
system which allows an optimal use of the
concentrated detergent.
Follow the product manufacturer’s recom-
mendations on quantities to use and do
not exceed the «MAX» mark in the de-
tergent dispenser drawer.
QUANTITY OF DETERGENT TO BE
USED
The type and quantity of detergent will de-
pend on the type of fabric, load size, de-
gree of soiling and hardness of the water
used.
Follow the product manufacturers’ instruc-
tions on quantities to use.
Use less detergent if:
you are washing a small load
the laundry is lightly soiled
large amounts of foam form during wash-
ing.
DEGREES OF WATER HARDNESS
Water hardness is classified in so-called
“degrees” of hardness. Information on hard-
ness of the water in your area can be ob-
tained from the relevant water supply com-
pany, or from your local authority. If the wa-
ter hardness degree is medium or high we
1) do not use acetone on artificial silk
10 electrolux
suggest you to add a water softener follow-
ing always the manufacturer’s instructions.
When the degree of hardness is soft, read-
just the quantity of the detergent.
WASHING PROGRAMMES
Programme - Maximum and Minimum Temperature -
Cycle Description - Maximum Spin Speed - Maxi-
mum Fabrics Load - Type of Laundry
Options
Detergent
Compartment
COTTONS
90° - 60°
Main wash - Rinses - Spin
Spin at maximum 800 rpm (EWS86110W)
Spin at maximum 1000 rpm (EWS106110W)
Max. load 6 kg - Reduced load 3 kg
White cottons (heavily soiled items).
SPIN
NO SPIN
RINSE HOLD
PREWASH
1)
DAILY
SUPER QUICK
2)
EXTRA RINSE
COTTONS ECONOMY
60°
Main wash - Rinses - Spin
Spin at maximum 800 rpm (EWS86110W)
Spin at maximum 1000 rpm (EWS106110W)
Max. load 6 kg
White and fast coloured cotton
This programme can be selected for slightly or normally
soiled cotton items. The temperature will decrease and the
washing time will be extended. This allows to obtain a
good washing efficiency so saving energy.
SPIN
NO SPIN
RINSE HOLD
PREWASH
1)
EXTRA RINSE
COTTONS ECONOMY
40°
Main wash - Rinses - Spin
Spin at maximum 800 rpm (EWS86110W)
Spin at maximum 1000 rpm (EWS106110W)
Max. load 6 kg
Coloured cotton
This programme can be selected for slightly or normally
soiled cotton items. The temperature will decrease and the
washing time will be extended. This allows to obtain a
good washing efficiency so saving energy.
SPIN
NO SPIN
RINSE HOLD
PREWASH
1)
EXTRA RINSE
COTTONS
40° - 30° - Cold
Main wash - Rinses - Spin
Spin at maximum 800 rpm (EWS86110W)
Spin at maximum 1000 rpm (EWS106110W)
Max. load 6 kg - Reduced load 3 kg
Coloured cottons (lightly or normally soiled items).
SPIN
NO SPIN
RINSE HOLD
PREWASH
1)
DAILY
SUPER QUICK
2)
EXTRA RINSE
SYNTHETICS
60° - 40° - 30° - Cold
Main wash - Rinses - Spin
Spin at maximum 800 rpm (EWS86110W)
Spin at maximum 900 rpm (EWS106110W)
Max. load 3 kg - Reduced load 1,5 kg
Synthetic or mixed fabrics: underwear,
coloured garments, non-shrink shirts, blouses.
SPIN
NO SPIN
RINSE HOLD
PREWASH
1)
DAILY
SUPER QUICK
2)
EXTRA RINSE
electrolux 11
Programme - Maximum and Minimum Temperature -
Cycle Description - Maximum Spin Speed - Maxi-
mum Fabrics Load - Type of Laundry
Options
Detergent
Compartment
DELICATES
40° - 30°
Main wash - Rinses - Spin
Spin at maximum 700 rpm
Max. load kg 3 - Reduced load kg 1,5
Delicate fabrics: acrylics, viscose, polyester.
SPIN
3)
NO SPIN
RINSE HOLD
PREWASH
1)
DAILY
SUPER QUICK
2)
EXTRA RINSE
WOOL
40° - 30° - Cold
Main wash - Rinses - Spin
Spin at maximum 800 rpm (EWS86110W)
Spin at maximum 1000 rpm (EWS106110W)
Max. load 2 kg
Washing programme for machine washable wool as well
as for hand washable woollens and delicate fabrics.
A single or bulky item may cause imbalance. If the
appliance doesn’t perform the final spin phase, add
more items, redistribute the load manually and then
select the spinning programme.
SPIN
NO SPIN
RINSE HOLD
RINSE
Rinse
Spin at maximum 800 rpm (EWS86110W)
Spin at maximum 1000 rpm (EWS106110W)
Max. load 6 kg
With this programme it is possible to rinse and spin cotton
garments which have been washed by hand. To intensify
the rinsing action, select the option EXTRA RINSE. The
appliance will add some additional rinses.
SPIN
NO SPIN
RINSE HOLD
EXTRA RINSE
DRAIN
Draining of water
Max. load 6 kg
For emptying out the water of the last rinse in programmes
with the Rinse Hold option selected.
SPIN
Drain and long spin
Spin at maximum 800 rpm (EWS86110W)
Spin at maximum 1000 rpm (EWS106110W)
Max. load 6 kg
Separate spin for hand washed garments and after pro-
grammes with options selected which end with water left
in the tub. You can choose the spin speed by pressing the
relevant button to adapt it to the fabrics to be spun.
SPIN
MINIPROGRAMME
30°
Main wash - Rinses - Spin
Spin at maximum 700 rpm
Max. load 3 kg
Ideal for laundry which is lightly soiled or which only needs
freshening up.
SPIN
3)
NO SPIN
= OFF
For cancelling the programme which is running or to switch the machine off.
1) If using liquid detergents, a programme without PREWASH must be selected.
12 electrolux
2) If you select the SUPER QUICK option by pressing button 3, we recommend that you reduce the maximum load
as indicated. Full loading is possible however with somewhat reduced cleaning results.
3) Available for model EWS86110W only.
CARE AND CLEANING
Warning! You must disconnect the
appliance from the electricity supply,
before you can carry out any cleaning
or maintenance work.
DESCALING
The water we use normally contains lime. It
is a good idea to periodically use a water
softening powder in the machine. Do this
separately from any laundry washing, and
according to the softening powder manu-
facturer's instructions. This will help to pre-
vent the formation of lime deposits.
AFTER EACH WASH
Leave the door open for a while. This helps
to prevent mould and stagnant smells form-
ing inside the appliance. Keeping the door
open after a wash will also help to preserve
the door seal.
MAINTENANCE WASH
With the use of low temperature washes it
is possible to get a build up of residues in-
side the drum.
We recommend that a maintenance wash
be performed on a regular basis.
To run a maintenance wash:
The drum should be empty of laundry.
Select the hottest cotton wash pro-
gramme.
Use a normal measure of detergent,
must be a powder with biological proper-
ties.
EXTERNAL CLEANING
Clean the exterior cabinet of the appliance
with soap and water only, and then dry
thoroughly.
Important! Do not use methylated spirits,
solvents or similar products to clean the
cabinet.
CLEANING THE DISPENSER DRAWER
The detergent dispenser drawer should be
cleaned regularly.
The washing powder and additive dispens-
er drawer should be cleaned regularly.
Remove the drawer by pressing the catch
downwards and by pulling it out.
Flush it out under a tap, to remove any
traces of accumulated powder.
To aid cleaning, the top part of the additive
compartment should be removed. Clean all
parts with water.
Clean the chamber of dispenser drawer
with a brush.
electrolux 13
WASHING DRUM
Rust deposits in the drum may occur due
to rusting foreign bodies in the washing or
tap water containing iron.
Important! Do not clean the drum with
acidic descaling agents, scouring agents
containing chlorine or iron or steel wool.
1. Remove any rust deposits on the drum
with a cleaning agent for stainless steel.
2. Run a washing cycle without any wash-
ing to clean off any cleaning agent resi-
dues.
Programme: Short Cotton Programme
at maximum temperature and add ap-
prox. 1/4 measuring cup of detergent.
DOOR SEAL
Check from time to time the door seal and
eliminate eventual possible objects that
could be trapped in the fold.
DRAIN PUMP
Regularly examine the drain pump and
make sure that it is clean.
Clean the pump regularly and/or if:
The appliance does not drain the water.
The drum cannot turn.
The appliance makes an unusual noise
because of the blockage of the drain
pump.
A problem with water draining is detected
(see chapter “What to do if...” for more
details).
Warning!
1. Disconnect the mains plug from
the mains socket.
2. Do not remove the filter while the
appliance operates. Do not clean
the drain pump if the water in the
appliance is hot. The water must
be cold before you clean the drain
pump.
To clean the drain pump:
1. Open the pump door.
2. Put a container below the recess of the
drain pump to collect the water that
flows out.
3. Press the two levers and pull forward
the drainage duct to let the water flow
out.
4. When the container is full of water, put
the drainage duct back again and emp-
ty the container. Do steps 3 and 4
again and again until no more water
flows out from the drain pump.
5. Pull back the drainage duct.
6. Unscrew the filter and remove it.
1
2
14 electrolux
7. Remove fluff and objects from the
pump.
8. Make sure that the impeller of the
pump can turn. If this does not occur,
contact the service centre.
9. Clean the filter under the water tap and
put it back in the pump into the special
guides.
10. Make sure that you tighten correctly the
filter to prevent leakages.
2
1
11. Close the drain pump door.
Warning!
Never remove the pump cover during a
wash cycle, always wait until the appliance
has finished the cycle, and is empty. When
refitting the pump cover, ensure it is se-
curely re-tightened so as to stop leaks and
young children being able to remove it.
CLEANING THE WATER INLET
FILTERS
If you notice that the machine is taking lon-
ger to fill, check that the filter in the water
inlet hose is not blocked.
1. Turn off the water tap.
2. Unscrew the water inlet hose.
3. Clean the filter in the hose using a hard
bristle brush.
4. Screw the hose back onto the tap.
5. Unscrew the hose from the machine.
Keep a rug nearby because some wa-
ter may flow.
6. Clean the filter in the valve with a stiff
brush or with the piece of cloth.
7. Screw the hose back to the machine
and make sure the connection is tight.
8. Turn on the water tap.
EMERGENCY EMPTYING OUT
If the appliance cannot drain the water, pro-
ceed as follows to empty out the machine:
1. pull out the plug from the power sock-
et;
2. close the water tap;
3. if necessary, wait until the water has
cooled down;
4. open the pump door;
5. place a container on the floor below the
recess of the drain pump;
electrolux 15
6. press the two levers and pull forward
the drainage duct to let the water flow
out;
7. when the container is full of water, put
the drainage duct back again and emp-
ty the container;
repeat this operation until water stops
flowing out;
8. if necessary clean the pump (refer to
the section ‘Drain pump’ );
9. close the drain pump door.
When you drain the water with the emer-
gency drain procedure, you must activate
again the drain system:
1. Put 2 litres of water in the main wash
compartment of the detergent dispens-
er.
2. Start the programme to drain the wa-
ter.
FROST PRECAUTIONS
If the machine is installed in a place where
the temperature could drop below 0°C, re-
move the remaining water from the inlet
hose and the drain pump.
1. disconnect the mains plug from the
mains socket.
2. close the water tap
3. unscrew the water inlet hose from the
tap;
4. put the two ends of the inlet hose in a
container and let the water flow out of
the hose.
5. empty the drain pump as described in
the ‘Emergency drain’ section.
6. when the drain pump is empty, install
the water inlet hose again.
Warning!
Make sure that the temperature is more
than 0 °C before you use the appliance
again.
The manufacturer is not responsible for
damages caused by low temperatures.
WHAT TO DO IF…
Certain problems are due to lack of simple
maintenance or oversights, which can be
solved easily without calling out an engi-
neer. Before contacting your local Service
Centre, please carry out the checks listed
below.
During machine operation it is possible that
the red pilot light of button 5 blinks to indi-
cate that the machine is not working.
It is possible to recognize the machine fault
by the number of button 5 light flashes. If
the number of flashes is different from the
ones indicated below, this is related to a
fault that you cannot solve. In this case,
contact your local Service Centre.
Press simultaneously the buttons 4 and 5
for a few seconds. The red button 5 light
will flash for a short time as described (the
green flash is not to be considered) :
4 flashes = «The washing machine
does not start», follow the correspond-
ing suggestions in «Possible cause/Solu-
tions» box and restart the programme.
1 flash = «The machine does not fill»,
follow the corresponding suggestions in
«Possible cause/Solutions» box and re-
start the programme.
2 flashes = «The machine does not
empty and/or does not spin», follow
the corresponding suggestions in «Possi-
ble cause/Solutions» box and restart the
programme.
Once the problem has been eliminated,
press the button 5 to restart the pro-
gramme. If after all checks, the problem
persists, contact your local Service Centre.
16 electrolux
Problem Possible cause/Solution
The washing machine does
not start:
The door has not been closed (the button 5 red light blinks).
Close the door firmly.
The plug is not properly inserted in the power socket.
Insert the plug into the power socket.
There is no power at the socket.
Please check your domestic electrical installation.
The main fuse has blown.
Replace the fuse.
The programme selector dial is not correctly positioned and the
button 5 has not been pressed.
Please turn the selector dial and press the button 5 again.
The delay start has been selected.
If the laundry are to be washed immediately, cancel the delay
start.
The machine does not fill:
The water tap is closed (the button 5 red light blinks).
Open the water tap.
The inlet hose is squashed or kinked (the button 5 red light blinks).
Check the inlet hose connection.
The filter in the inlet hose or the inlet valve filter are blocked (the
button 5 red light blinks).
Clean the water inlet filters (See "Cleaning the water inlet filters"
for more details).
The door is not properly closed (the button 5 red light blinks).
Close the door firmly.
The machine fills then emp-
ties immediately:
The end of the drain hose is too low.
Refer to relevant paragraph in «water drainage» section.
The machine does not
empty and/or does not
spin:
The drain hose is squashed or kinked (the button 5 red light
blinks).
Check the drain hose connection.
The drain filter is clogged (the button 5 red light blinks).
Clean the drain filter.
An option or a programme that ends with the water still in the tub
or a that eliminates all the spinning phases has been selected.
Select the draining or spinning programme.
The laundry is not evenly distributed in the drum.
Redistribute the laundry.
There is water on the floor:
Too much detergent or unsuitable detergent (creates too much
foam) has been used.
Reduce the detergent quantity or use another one.
Check whether there are any leaks from one of the inlet hose fit-
tings. It is not always easy to see this as the water runs down the
hose; check to see if it is damp.
Check the water inlet hose connection.
The drain or inlet hose is damaged.
Replace it with a new one.
The filter has not been properly screwed in after cleaning action.
Screw the filter fully in.
Unsatisfactory washing re-
sults:
Too little detergent or unsuitable detergent has been used.
Increase the detergent quantity or use another one.
Stubborn stains have not been treated prior to washing.
Use commercial products to treat the stubborn stains.
The correct temperature was not selected.
Check if you have selected the correct temperature.
Excessive laundry load.
Reduce the laundry load.
electrolux 17
Problem Possible cause/Solution
The door will not open:
The programme is still running.
Wait the end of washing cycle.
The door lock has not been released.
Wait until the door is released before opening the door.
There is water in the drum.
Select drain or spin programme to empty out the water.
The machine vibrates is
noisy:
The transit bolts and packing have not been removed.
Check the correct installation of the appliance.
The support feet have not been adjusted
Check the correct levelling of the appliance.
The laundry is not evenly distributed in the drum.
Redistribute the laundry.
Maybe there is very little laundry in the drum.
Load more laundry.
Spinning starts late or the
machine does not spin:
The electronic unbalance detection device has cut in because the
laundry is not evenly distributed in the drum. The laundry is redis-
tributed by reverse rotation of the drum. This may happen several
times before the unbalance disappears and normal spinning can
resume. If, after 10 minutes, the laundry is still not evenly distrib-
uted in the drum, the machine will not spin. In this case, redistrib-
ute the load manually and select the spin programme.
Redistribute the laundry.
The load is too small.
Add more items, redistribute the load manually and then select
the spinning programme.
The machine makes an un-
usual noise:
The machine is fitted with a type of motor which makes an unusual
noise compared with other traditional motors. This new motor en-
sures a softer start and more even distribution of the laundry in the
drum when spinning, as well as increased stability of the machine.
No water is visible in the
drum:
Machines based on modern technology operate very economically
using very little water without affecting performance.
If you are unable to identify or solve the
problem, contact our service centre. Before
telephoning, make a note of the model, se-
rial number and purchase date of your ma-
chine: the Service Centre will require this
information.
Mod. ... ... ...
Prod. No. ... ... ...
Ser. No. ...
TECHNICAL DATA
Dimensions Width
Height
Depth
60 cm
85 cm
44 cm
Electrical connection Information on the electrical connection is given on the rating
plate, on the inner edge of the appliance door.
Water supply pressure Minimum
Maximum
0,05 MPa
0,8 MPa
Maximum Load Cotton 6 kg
Spin Speed Maximum 800 rpm (EWS 86110 W)
1000 rpm (EWS 106110 W)
18 electrolux
TECHNICAL DATA
Brand logo Electrolux
Name of the distributor Electrolux Lehel Kft
1142 Budapest
Erzsébet kir.né útja 87
Model denomination EWS 86110
W
EWS
106110 W
Measure unit Values
Energy class
(on scale from A+++ to D, where
A+++ - most effective and D -
least effective)
A+
Washing performance
(on scale from A to G, where A -
higher and G - lower perform-
ance)
A A
Spin drying performance
(on scale from A to G, where A -
better and G - worse)
D C
Residual humidity % 66 60
Maximum spin speed
rpm 800 1000
Wash load on normal cotton
programme
kg 6
Average annual energy con-
sumption
kW
(estimated annual consumption
of a 4- member household)
194
Average water consumption
litres
(estimated annual consumption
of a 4- member household)
8995
Washing noise on normal 6
C cotton programme
dB/A 56 58
Spinning noise on normal 60°
C cotton programme
dB/A 76 76
CONSUMPTION VALUES
Programme Energy consump-
tion (KWh)
1)
Water consump-
tion (litre)
1)
Programme du-
ration (Mi-
nutes)
1)
White Cottons 95 °C 2.1 62 180
Cottons 60 °C 1.3 59 170
Cottons 40 °C 0.75 59 145
Synthetics 40 °C 0.5 45 95
Delicates 40 °C 0.55 55 77
Wool/ Handwash 30 °C 0.3 50 55
1) The consumption information shown in this chart is indicative. It can vary depending on the quantity and the type
of laundry, on the temperature of the water supply and on the ambient temperature.
Standard programmes for the Energy
Label consumption values
The cotton 60 °C economy and cotton 40
°C economy are the standard cotton pro-
grammes for normally soiled cotton laundry.
They are suitable to clean normally soiled
cotton laundry and they are the most effi-
cient programmes in terms of combined
electrolux 19
energy and water consumption for washing
that type of cotton laundry.
They agree with EN60456.
The actual water temperature may dif-
fer from the declared cycle tempera-
ture.
INSTALLATION
UNPACKING
All transit bolts and packing must be re-
moved before using the appliance.
You are advised to keep all transit devices
so that they can be refitted if the machine
ever has to be transported again.
1. After removing all the packaging, care-
fully lay machine on it’s back to remove
the polystyrene base from the bottom.
2. Remove the power supply cable and
the draining and inlet hose from the
hose holders on the rear of the appli-
ance.
3. Unscrew the three bolts.
4. Slide out the relevant plastic spacers.
5. Fill the smaller upper hole and the two
large ones with the corresponding plas-
tic plug caps supplied in the bag con-
taining the instruction booklet.
POSITIONING
Install the machine on a flat hard floor.
Make sure that air circulation around the
machine is not impeded by carpets, rugs
etc. Check that the machine does not
1
2
20 electrolux
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24

Electrolux EWS106110W User manual

Category
Washing machines
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI