Summit PED12 Operating instructions

Type
Operating instructions

This manual is also suitable for

Summit Appliance Division · Felix Storch, Inc. · www.summitappliance.com · 718-893-3900 · [email protected]
Pedestal Assembly Instructions
for SUMMIT® Refrigerator-Freezers CP35, FF71, FF73 and FFBF49A
Following the instructions below to mount the refrigerator correctly on the pedestal will keep
your appliance from tipping forward.
NOTE: Do not move pedestal into its final location until the last step.
1. Mount Bracket 1 to the position on the floor where the refrigerator will eventually be placed.
2. Reverse Bracket 2 which has been pre-mounted to the pedestal.
3. Mount refrigerator over the lip at front of pedestal and under bracket 2 as shown below.
4. Adjust lip of pedestal and tighten 4 screws to hold it in place.
5. Slide pedestal into final location so that it fits under the prongs of Bracket 1.
This completes the assembly.
Rear of pedestal showing
pre-mounted Bracket 2
Bracket 1 mounted
to the floor
Bracket 2 reversed
Front legs of refrigerator
are positioned behind lip
of pedestal
Refrigerator mounted on
pedestal and positioned
under Bracket 1
  • Page 1 1

Summit PED12 Operating instructions

Type
Operating instructions
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI