a proud H e r i tage of E x pe r i e n c e a n d Q u a l i t y
17621 South Susana Road
Rancho Dominguez, CA 90221
Phone: 1.800.777.8466
Fax: 1.310.886.3310
info@vinotemp.com
www.vinotemp.com
Are you thinking about purchasing a Vinotemp freestanding cooler?
Here are some helpful guidelines, so you know what to expect
once you get your cooler home.
• Exercise caution when moving and installing the unit. The cooler is
heavy and may require two or more people when moving the unit to
prevent strain or injury.
• Ensure that the wine cooler remains in the upright position during
transportation.
• Once you have the cooler in the optimal location, it must rest
UNPLUGGED for a minimum of 24 hours before use.
• To ensure proper ventilation for your appliance, the front of the unit
must be completely unobstructed. Do not place any objects on
top of the cooler.
• Choose a well-ventilated area with temperatures that do not exceed
90°F, away from direct sunlight and sources of heat
(stove, heater, radiator, etc).
• This unit is intended for indoor use only and must be installed in an
area protected from the elements.
• Your cooler will need its own separate, grounded plug that is not
controlled by a switch or pull chain. We do not recommend you use
an extension cord to power your unit.
• You may need to unlock the control panel when first using your
cooler. Instructions on how to unlock the control panel can be
found in each cooler’s Owner’s Manual.
• To protect against electric shock, do not immerse appliance, plug
or cord in water or other liquids.
• For indoor, household use only unless otherwise noted. Any other
use will void the warranty.
• Please note that these general instructions are provided as a guide
and do not take the place of an Owner’s Manual. Your appliance
will arrive with its own Owner’s Manual with more detailed
installation instructions.
FREESTANDING
Wine Cooler
Installation Guide
VT-12TSMD-2Z
VT-15 TS
VT-21TSP-2Z
• Leave 6 inches of space at the back.
• On both sides, leave10-12 inches of space to ensure
proper air circulation to cool the cooling system.
• There also must be unlimited clearance at the top of
the cooler to ensure proper air circulation.
a proud H e r i tage of E x pe r i e n c e a n d Q u a l i t y
17621 South Susana Road
Rancho Dominguez, CA 90221
Phone: 1.800.777.8466
Fax: 1.310.886.3310
info@vinotemp.com
www.vinotemp.com
Basic Guidelines for Proper
Freestanding Installation:
Example (as shown with VT-12TSMD-2Z):
˚F/˚C
˚F
45
˚F/˚C
˚F
55
15.25”
19.75”
19.75”
10” min
6” min
10” min
SIDE
BACK
KEEP TOP CLEARANCE OPEN
SIDE
˚F/˚C
˚F
45
˚F/˚C
˚F
55
-
1
-
2
Vinotemp VT-16TSBM Installation guide
- Type
- Installation guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Vinotemp VT-DS15IMSS Owner's manual
-
-
-
-
-
-
-
-
-
Element EL-300COMM L User manual
Other documents
-
Element by Vinotemp EL-33WCST Owner's manual
-
-
-
-
-
-
Vinotemp International VT-28-2Z-SSDST User guide
