Samsung HT-TX72 - DVD Home Theater System Firmware Update Manual

HT-TX72 - DVD Home Theater System
Samsung
Brand
Samsung
Model
HT-TX72 - DVD Home Theater System
Type
Firmware Update Manual
1
DVD HOMETHEATER SYSTEM
Firmware Update
Contents
1. Check Product’s F/W Version
2. Update by Disc or USB device
2
1. Check Product’s FIRMWARE Version
- Turn on the product. Make the tray open by pressing ONEN/CLOSE button.
- Press MENU button on the remote controller, then press Numeric button 8,9,5.
- In some case of 5-Disc supported models, Play an DVD disc first
,before Tray open
- Do the same procedure mentioned before
: press Menu, 8, 9, 5 buttons on the remote controller
( Model name : HT-DB6XX, HT-DS6XX, HT-P4X )
3
- Product’s FIRMWARE Version and File name is displayed in screen.
① : It shows Firmware version of product
Above screen, The Version is 1.12.
② : It shows Firmware File name of product.
Above screen The file name is PDADVIDS.ROM.
2
1
4
2. UPDATE by Disc or USB Device
- In case of Using a disc, Make an update disc under below recommendation.
. Disc type : ISO type
. Multi-session : No Multi-session
. Recording speed : under 8x
- You can update new F/W, by playing the update disc
- For the USB HOST playback supported model, Copy F/W file to USB device
.Format the USB Device
.Copy the firmware file to USB Memory device
- You can update new F/W, by select USB function after USB device plug-in
▶Important notice
- Check the F/W file name of the set and file name of new firmware you want to
update is same
- If the file name is different between New F/W file and filename on the set,
Firmware UPDATE can not be done.
5
- Turn on the product, Play an Update disc or a USB Device
- Firmware update is carried, repeating ERASE and WRITE after READING
- After Update complete, The set goes to turn off and turn on state automatically.
- Press ■(STOP) button on the main unit in “No disc“ condition.
6
- Pressing the button continuously until INITIAL display in the Display window
- In power off condition, Press
■(STOP) button on the main unit again.
- Pressing the button until the Standby LED on the main unit blink.
- After initial, you can select an OSD language in the SETUP Menu
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Samsung HT-TX72 - DVD Home Theater System Firmware Update Manual

HT-TX72 - DVD Home Theater System
Samsung
Brand
Samsung
Model
HT-TX72 - DVD Home Theater System
Type
Firmware Update Manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents