StakWEL STKWL-C Operating instructions

  • I've reviewed the Attachment Instructions for the Bilco stakWELT Cover Retainers. This document provides a step-by-step guide on how to attach the plastic retainers and details the process for emergency removal. I'm ready to answer any questions you might have about these instructions.
  • How many plastic retainers are provided?
    Where should the plastic retainers be attached?
    How should the cover be removed in an emergency?
Attachment Instructions
for stakWEL Cover Retainers
Four (4) plastic retainers are provided. Remove retainers from plastic runner and attach as follows:
For additional information or questions,
please contact The Bilco Company at:
1-800-854-9724 or www.bilco.com
For Emergency Egress: Place both hands in
the center of cover and push up and away from
the house. Make sure everyone in the household
understands how the cover is removed.
STK78-01
TM
1
21
2
Push plastic retainers onto cover flange as shown in
Detail A. The four clips should be spaced and located
approximately as shown in Detail B
Detail A
Detail B
Lower the cover onto
the well. Push down
on each of the plastic
retainers to fully
engage them with the
vertical flange on the
top of the well.
X
XX
X
Imagine . . .
What Bilco can do for your Basement
/