Aroma Diuser
Quick Start Guide
Model Number
AD90G / AD90B
708475
AD90G
Product Code
Warranty 1 Year
QSG-Version 1.1
Step 1
Lift and remove the diuser’s outer cover
Step 2
Lift and remove the tank cover.
Step 3
Pour fresh, clean water into the tank,
ensuring that the level is not higher than the
“MAX” mark or lower than the “MIN” mark
(on the inside of the tank). If desired, add
3-4 drops of essential oils into the full water
tank (see page 11 of the instruction manual
for suggestions).
Step 4
Insert the USB power cable into the diuser
port and the power supply.
Model Number
AD90B
Step 5
Short press the diuse
button to switch
on/o the diuser.
The continuous
spray function will
automatically start after switching on.
Long press the diuse button
(3 seconds) to switch between
continuous and intermittent spray.
The blue light will blink three times to
indicate the spray mode shift.
Step 6
To switch on the
7-colour changing
mood light, press
the light button.
To stop the moodlight on a certain
colour, press the button again while
that colour is on.
To turn o the mood light, press
this button again.
Please read the full instruction manual thoroughly before use.
It contains comprehensive usage instructions and important safety advice.
This quick start guide only contains basic instructions.
Quick Start Guide
(1)
(2)
(3)
MAX
MIN
For more information
please visit www.stirlingappliances.com.au
or call 1300 112 534
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI