2. Topeak
  3. TTF-SD01

Topeak TTF-SD01 Owner's manual

  • Hello, I'm your chat assistant. I've reviewed the user guide for the Topeak Transformer XX Stand. This document provides instructions on how to properly use the bike stand, emphasizing important safety precautions and advising on its compatibility with various bike types, and detailing its adjustable features. I'm ready to answer your questions about the stand.
  • What type of bikes are compatible with the Transformer XX Stand?
    What is the maximum weight capacity of the bike stand?
    What kind of surfaces should be avoided when using Transformer XX Stand?
    How do I adjust height of the bike stand hooks?
2-year Warranty: All mechanical components against
manufacturing defects only.
Warranty Claim Requirements
To obtain warranty service, you must have your original
sales receipt. Items returned without a sales receipt will
assume that the warranty begins on the date of
manufacture. All warranties will be void if the product
is damaged due to user crash, abuse, system alteration,
modification, or used in any way not intended as
described in this manual.
* The specications and design are subject to change
without notice.
Please contact your Topeak dealer with any questions.
For USA customer service call: 1-800-250-3068
www.topeak.com
WARRANTY
WARNING
GB
User's Guide
Transformer™ XX Stand
M-TTF-SD01 GB 04/14Copyright © Topeak, Inc. 2014
Fits
Seatstays
& Chainstays
≤ ø 28 mm
28 mm
DO NOT PUT ANY WEIGHT ON BIKE.
Transformer™ XX
Stand ts most bikes,
however, it will not
work with bikes that
do not have seatstays
or chainstays.
DO NOT use on grass, loose dirt, gravel,
uneven or soft surfaces. Check the stability
of the Transformer™ XX Stand periodically
to insure safe storage of your bikes.
2
Use the QR locking lever to open or close the support legs completely.
OPERATING INSTRUCTIONS
Use 3mm Allen key to adjust the
torque of screws if necessary.
Use 3mm Allen key to adjust the
torque of screws if necessary.
1
Locking Lever
Seatstay
Folding Hook
Release Button
Chainstay
Folding Hook
Support Legs
Adjust
Close to
Unlock
Open to
Lock
Close hook and slide to adjust to proper height. Open hook to lock in position.
3mm Allen key
3mm Allen key
25 kgs
MAXIMUM BIKE
WEIGHT CAPACITY
Recommended Torque:
1-1.2 Nm (8.85-10.62 in-lbs)
Recommended Torque:
1-1.2 Nm (8.85-10.62 in-lbs)
Be aware of the distance between
wheel and support legs and insure
there is no interference while operating
the crank.
Avoid bodily harm when folding
support legs.
/