Black Box JPMTU-FIBER-3 Owner's manual

Black Box
Brand
Black Box
Model
JPMTU-FIBER-3
Category
Rack accessories
Type
Owner's manual

This manual is also suitable for

Black Box JPMTU-FIBER-3 is a 3-port Universal Rackmount Fiber Panel that can support up to 3 fiber adapter panels or fiber cassettes. It's an inexpensive way to rackmount and organize your fiber optic connections in a relay rack or cabinet. The fiber adapter panels or cassettes are mounted horizontally from side to side across the panel. Depending upon the adapter panel or cassette, you can manage up to 144 strands of glass. The 3-port panel is only one rack unit high and is made of cold-rolled steel. It has a rear horizontal cable support tray that extends back 4 inches from the front.

Black Box JPMTU-FIBER-3 is a 3-port Universal Rackmount Fiber Panel that can support up to 3 fiber adapter panels or fiber cassettes. It's an inexpensive way to rackmount and organize your fiber optic connections in a relay rack or cabinet. The fiber adapter panels or cassettes are mounted horizontally from side to side across the panel. Depending upon the adapter panel or cassette, you can manage up to 144 strands of glass. The 3-port panel is only one rack unit high and is made of cold-rolled steel. It has a rear horizontal cable support tray that extends back 4 inches from the front.

User Manual
Universal Rackmount Fiber Panel
JPMTU-FIBER-3
JPMTU-FIBER-6
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746
www.blackbox.com • info@blackbox.com
Customer
Support
Information
Description
The Universal Rackmount Fiber Panel can support up to 3 or 6 fiber adapter panels or fiber cassettes depending upon the model
you have. It's an inexpensive way to rackmount and organize your fiber optic connections in a relay rack or cabinet.
The fiber adapter panels or cassettes are mounted horizontally from side to side across the panel. Depending upon the adapter
panel or cassette, you can manage up to 144 strands of glass.
The 3-port panel is only one rack unit high and the 6-port panel is two rack units high. It’s made of cold-rolled steel, and has a
rear horizontal cable support tray that extends back 4 inches from the front. The Universal Rackmount Fiber Panel accommodates
six cable management rings to help organize the fiber cabling behind the panel.
What’s Included
• (1) Universal Rackmount Fiber Panel
• (4) 10-32 rackmount cup head screws
• (4) 12-24 rackmount cup head screws
• (1) Cable Support Bar – not installed
• (2) Screws for Cable Support bar
• (6) Cable Management Rings – not installed
• This user manual
724-746-5500 | blackbox.com
About Black Box
Black Box provides an extensive range of networking and infrastructure products. You’ll find everything from cabinets and racks
and power and surge protection products to media converters and Ethernet switches all supported by free, live 24/7 Tech support
available in 60 seconds or less.
© Copyright 2016. Black Box Corporation. All rights reserved. Black Box® and the Double Diamond logo are registered trademarks of BB Technologies, Inc.
Any third-party trademarks appearing in this manual are acknowledged to be the property of their respective owners.
jpmtu-fiber-3, version 1
Pre-Installation
1. Attach the cable support bar (included in your package) to the front panel with the two screws (included).
2. Find one or two free rack units of space to install the 3- or 6-port panel in your relay rack or data cabinet.
Your Universal Rackmount Fiber Panel can support any combination of fiber adapter panels or fiber cassettes.
NOTE: Do not install cable management rings at this time. If you plan on installing fiber cassettes in the Universal Rackmount Fiber
Panel, the cable management rings will interfere with the cassettes if installed now.
Installing Fiber Adapter Panels
1. Snap the fiber adapter panel into an available opening on the Universal Rackmount Fiber Panel.
2. Continue to install fiber adapter panels in the remaining available openings until the Universal Rackmount Fiber Panel is full.
3. Install the cable management rings on the cable support bar to help organize the fiber zip cord assemblies.
Installing Cassettes
1. Snap a fiber cassette into an available opening on the Universal Rackmount Fiber Panel.
2. Continue to install fiber cassettes in the remaining available openings until the Universal Rackmount Fiber Panel is full.
The photo below shows a fiber panel with cassettes installed.
Once your Universal Rackmount Fiber Panel is fully populated, you can then mount it in a free available space in your cabinet or
relay rack using the mounting hardware (included).
  • Page 1 1
  • Page 2 2

Black Box JPMTU-FIBER-3 Owner's manual

Black Box
Brand
Black Box
Model
JPMTU-FIBER-3
Category
Rack accessories
Type
Owner's manual
This manual is also suitable for

Black Box JPMTU-FIBER-3 is a 3-port Universal Rackmount Fiber Panel that can support up to 3 fiber adapter panels or fiber cassettes. It's an inexpensive way to rackmount and organize your fiber optic connections in a relay rack or cabinet. The fiber adapter panels or cassettes are mounted horizontally from side to side across the panel. Depending upon the adapter panel or cassette, you can manage up to 144 strands of glass. The 3-port panel is only one rack unit high and is made of cold-rolled steel. It has a rear horizontal cable support tray that extends back 4 inches from the front.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers