2. Z-Saw
  3. Z-7029

Z-Saw Z-7029, 110/7030 Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Z-Saw Z-7029 Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Woodcraft, 560 Airport Industrial Park, P.O. Box 1686, Parkersburg, WV 26102-1686
© 2001 by Woodcraft Supply Corp. “Helping You Make Wood Work” is a registered trademark of Woodcraft Supply Corp.
77A63
Dozuki Blade Replacement Product #12F27, 12F28, 12F29, 12F34
01/15/02
Revised
Blade Removal:
To remove the "Z" saw blade, tap the back of the saw blade end
gently on a piece of lumber. This tapping motion will loosen the
blade from the back metal spine, allowing the blade to pivot
upward as shown.
Blade Replacement:
To replace the "Z" saw blade, place the "hook" of the blade
around the hook support bolt as indicated. Gently tap the back
metal spine on a piece of lumber until the blade is fully seated.
/