2. Z-Saw
  3. 110/7030

Z-Saw 110/7030, Z-7029 Operating instructions

  • Hello! I have reviewed the instructions for Dozuki saw blade replacement for models 12F27, 12F28, 12F29, and 12F34. This document outlines the steps for removing and reattaching the blade, using a tapping method to secure it. I'm ready to answer any specific questions you may have regarding the blade replacement process.
  • How do I remove the saw blade?
    How do I replace the saw blade?
Woodcraft, 560 Airport Industrial Park, P.O. Box 1686, Parkersburg, WV 26102-1686
© 2001 by Woodcraft Supply Corp. “Helping You Make Wood Work” is a registered trademark of Woodcraft Supply Corp.
77A63
Dozuki Blade Replacement Product #12F27, 12F28, 12F29, 12F34
01/15/02
Revised
Blade Removal:
To remove the "Z" saw blade, tap the back of the saw blade end
gently on a piece of lumber. This tapping motion will loosen the
blade from the back metal spine, allowing the blade to pivot
upward as shown.
Blade Replacement:
To replace the "Z" saw blade, place the "hook" of the blade
around the hook support bolt as indicated. Gently tap the back
metal spine on a piece of lumber until the blade is fully seated.
/