TieJus ZY-E5 2K Floodlight Solar Security Camera Installation guide

Type
Installation guide

TieJus ZY-E5 2K Floodlight Solar Security Camera is a versatile and feature-rich security camera that is powered by solar energy, making it an excellent choice for outdoor surveillance. With its 2K resolution, you'll capture clear and detailed footage, and the built-in floodlight provides illumination for night vision and can also be used as a deterrent. Installation is simple with the included mount and screw kit, and you can customize the camera's angle to optimize motion detection within the camera's field of view.

TieJus ZY-E5 2K Floodlight Solar Security Camera is a versatile and feature-rich security camera that is powered by solar energy, making it an excellent choice for outdoor surveillance. With its 2K resolution, you'll capture clear and detailed footage, and the built-in floodlight provides illumination for night vision and can also be used as a deterrent. Installation is simple with the included mount and screw kit, and you can customize the camera's angle to optimize motion detection within the camera's field of view.

Installation Manual
1. Find a good location for your camera
Make sure the camera is not blocked and ensure it is in coverage of Wi-Fi.
2. Wall mount your camera
Your camera comes with a mount and a screw kit.
1) Place the mount and secure it with screws.
If you’re mounting the camera on drywall, use the drywall anchors we provide.
2) Attach the camera to the mount.
3) Tilt and swivel to adjust the camera angle.
Note:
Do not install the camera in a position facing strong lights/mirror/window/swimming pool.
Do not place the camera too close to any angle with busy traffic.
Stay away from the outlets, including air conditioner vents, humidifier outlets, the heat
transfer vents of the projectors, etc.
Keep the camera at least 1 meter away from any wireless devices to avoid interference,
such as microwave stove or Wi-Fi routers and etc.
If there is any motion detection delay or false alerts, please contact 24/7 after-sales service
3. Position your camera to detect motion in specific areas
You can mount and aim your camera in different ways to optimize the camera’s ability to
detect motion in specific areas. The lower two-thirds of the camera’s field of view is the
motion-sensitive part of the image. Aim the camera so that any motion you wish to detect
appears within this part of the image.
If you want to monitor motion closer to the camera, such as visitors to your front door, mount
the camera at least 7-10 feet (2-3 meters) highand aim it so that visitors appear in the lower
two-thirds of the image. This angle works well to avoid motion alerts for movement in the top
third of the image, such as vehicles driving by. To monitor motion occurring farther away, such as
children playing on a lawn, aim the camera higher to frame the area within the lower two-thirds
of the image.
Its best to position the camera so that motion is moving from side-to-side across its field of view
rather than directly toward or away from the camera. Also, though the camera can detect motion
up to 33 feet (10 meters) away, the best area for motion detection is 5 to 20 feet (1.5 to 6
meters) from the camera position.
  • Page 1 1
  • Page 2 2

TieJus ZY-E5 2K Floodlight Solar Security Camera Installation guide

Type
Installation guide

TieJus ZY-E5 2K Floodlight Solar Security Camera is a versatile and feature-rich security camera that is powered by solar energy, making it an excellent choice for outdoor surveillance. With its 2K resolution, you'll capture clear and detailed footage, and the built-in floodlight provides illumination for night vision and can also be used as a deterrent. Installation is simple with the included mount and screw kit, and you can customize the camera's angle to optimize motion detection within the camera's field of view.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI