3.Connect the free standing bathtub to the waste outlet.
1.Take the bathtub out of the carton and put it on the
cardboard and carpet. please ensure that all the surfaces of
the bathtub must not contact rough things.
4.After the installation, please do a final test to the bathtub.
Please fill the bathtub with water and check if all water flows
freely to the waste outlet.
FREE STANDING BATHTUB INSTALLATION INSTRUCTION
Thank you very much for your purchase of high
quality free standing bathtub made of Acrylic.
Before installation you should have:
2.Before installing,please make sure the floor is flat. Then
adjust the legs of bathtub to ensure the bathtub is installed
horizontally. Otherwise, the water will collect in the bathtub.
Powered by TCPDF (www.tcpdf.org)
