Valore BTS43 Owner's manual

Brand: Valore

Model: BTS43

Type: Owner's manual

Valore BTS43 is a True Wireless Stereo speaker with a USB-C charging port and RGB rhythm light. The speaker has a Bluetooth range of 10 meters, a power output of 5W, and a battery capacity of 600mAh, providing up to 3.5 hours of playtime.

The speaker supports TWS (True Wireless Stereo) technology, allowing you to connect two speakers wirelessly for a more immersive sound experience. It also features an RGB rhythm light that pulsates to the beat of your music, creating a party atmosphere.

The speaker is easy to use. Simply turn it on, pair it with your Bluetooth device, and start playing your music. You can control the volume, skip tracks, and pause/play music directly from the speaker.

Thank you for purchasing the Valore Wireless Speaker (BTS43).

Important: Please read the user manual thoroughly before using the product.

Features:

• Ture wireless stereo

• USB-C charging

• RGB rhythm light

Specifications: Package Contents:

Valore

Wireless Speaker

I. FUNCTION DESCRIPTION

Type-C Charging Port

DC 5V

FRONT BACK

• Bluetooth range: 10m

• Power output: 5W

• Battery capacity: 600mAh

• Charging Time: Approximately 2.5 hours

• Battery life: Up to 3.5 hours

• Power input: DC 5V/0.5A

• Valore BTS43 wireless speaker × 1

• USB-C charging cable × 1

OFF/ON

Light control key

TWS key

Press the ‘ON/OFF’ button for 3-5 seconds to turn on the speaker.

9 blinking indicator lights means that the speaker is currently not connected to any device, it will

enter pairing mode now.

II. PAIRING AND CONNECTING

III. CHARGING

IV. DOUBLE SPEAKER

Turn on the Bluetooth on your phone, search for Bluetooth device ‘0000’ and connect.

Upon successful connection, the speaker will give a prompt tone and the 9 indicator lights

will stay on.

Press the ‘ON/OFF’ button on both speakers, the indicator lights will start blinking and speakers

enter pairing mode.

Plug the USB-C charging cable into the charging port to charge.

During charging, the number of indicator lights reflects the charging progress.

The lights will be off once the speaker is fully charged.

The speaker will automatically turn off if it is not paired or connected to any device

after 3 minutes.

Press the ‘ON/OFF’ button for 3-5 seconds to turn off the speaker.

Note:

The above process is necessary to pair with the speaker for the first time. The speaker will automatically connect to the device it last

paired with from the second time onwards. This applies to both Android phones and iPhone.

Warning:

Please use DC 5V charger/adaptor to charge. Incompatible charger may cause hardware damage and other problems.

The indicator light will flash quickly to indicate low battery. If the speaker is not charged in time, it

will sound a few times then shut down automatically.

Press the ‘M’ button on the main speaker for about 10 seconds, the connection is successful

if the other speaker gives a prompt tone.

V. LIGHTING

Turn on Bluetooth on your phone, search for Bluetooth device ‘0000’ and connect.

The speaker will give a sound upon successful connection. The 9 indicator lights will stay on.

All lights are on by default when the speaker is on.

Press ‘M’ to change the pulsing mode.

Light up in the middle then spread to the sides

Light up in the bottom then spread upwards

Light up a the sides then spread towards the middle

All lights off

To disconnect the 2 speakers, turn off Bluetooth on your device first. Long press

the ‘M’ button on the main speaker until you hear the prompt tone. Indicator lights on both

speakers will blink slowly.

*Turn off Bluetooth on your device first before connecting the 2 speakers if each speaker has connected to your device

individually before. Low battery may lead to unsuccessful pairing. Please try pairing and connecting

when the speakers are charged.

TECHNICAL SUPPORT & WARRANTY

• For Technical Support, email us at [email protected].

• For Warranty Registration, visit www.valore.sg.

Cautions:

Read all the instructions and warnings carefully prior to using this product.

• Do not store the product in a high temperature environment.

• Do not place the product near fire or other excessively hot environments.

• Do not expose the product to moisture or submerge it in liquid. Keep the product dry at all

times.

• Do not disassemble the product or attempt to repair or modify it in any manner.

• Do not expose the product to strong impacts or use on rough surfaces. If there is any

serious damage to the product such as dents, cracks or abrasion, stop using the product and

you have purchased it from.

• If the product produces any abnormal smell, heats up abnormally during use or experiences

unusual changes in form or colour, stop using the product and contact us immediately via

email at [email protected].

DISCLAIMER & TRADEMARKS

All information, trademarks, logos, graphics, and images (“Materials”) provided on this user manual are

copyrighted or trademarked and are the property of Valore Lifestyle Pte Ltd. Any unauthorized use of any

material contained on the instruction manual may violate copyright laws, trademark laws, laws of privacy and

communications statutes.

The trademarks, service marks and logos used and displayed in the Materials are registered and unregistered

trademarks and service marks of Valore and others. All other registered and unregistered company names,

product names and marks mentioned herein the (“Materials”) are the property of their respective owners and

may be trademarks or registered trademarks.

Inspired by Valore Singapore

For full range of Valore products visit www.valore.sg

Valore BTS43 Owner's manual

Valore BTS43 Owner's manual

Valore BTS43 Owner's manual

Related papers