FR-8x Version 2.01 Changes & Improvements
This leaet describes the enhancements made to the Roland
FR-8x with Version 2.01 of its software. This leaet is intended as a
companion to the FR-8x Owner’s Manual.
Added Parameters and Values
13.5 Chin Function
Now you can assign the following functions to the chin switches.
Parameter Value Explanation
Chin 1–3
Accordion Button,
Organ Button,
Orch 2 Button,
Orch 1 Button,
Bass&Chord Btn,
F.Bass Btn,
OrchCh/FBas Btn,
Orch Bass Btn
Assign the same operation as when
the corresponding button on the
main unit is pressed.
14.5 Function Switch
Now you can assign the following functions to the function
switches.
Parameter Value Explanation
Switch 1–6
Accordion Button,
Organ Button,
Orch 2 Button,
Orch 1 Button,
Bass&Chord Btn,
F.Bass Btn,
OrchCh/FBas Btn,
Orch Bass Btn
Assign the same operation as when
the corresponding button on the
main unit is pressed.
14.8 MIDI Foot Controller
Now you can assign the following functions to the MIDI foot
controllers.
Parameter Value Explanation
Switch 1–15
Accordion Button,
Organ Button,
Orch 2 Button,
Orch 1 Button,
Bass&Chord Btn,
F.Bass Btn,
OrchCh/FBas Btn,
Orch Bass Btn
Assign the same operation as when
the corresponding button on the
main unit is pressed.
9.2 Tone Control
The following values have been added.
Parameter Value Explanation
VOICING Cycle 4–10
Cycle 4 Cycle 5
Cycle 6 Cycle 7 Cycle 8
Cycle 9 Cycle 10
7.1 Organ Selection
The following values have been added.
Parameter Value Explanation
VOLUME
O,
-40–Std–+40
An oset value for the organ sound relative
to the volume.
Display Hints When Entering Characters
Hints for character entry are now displayed when entering
characters, such as when you’re assigning a name to a user
program.
Parameter Explanation
[UP][DOWN] buttons Switch the keyboard mapping.
SET [C] button
Deletes a character to the left of the cursor.
SET [A] button
Deletes a character under the cursor.
Right hand registers [1] button Inserts a character (Insert).
Right hand registers [2] button Replaces a character (Replace).
Right hand registers [3] button Moves the cursor left.
Right hand registers [4] button Moves the cursor right.
Jump to a User Program
When the user program list is displayed, you can now easily jump to
a user program.
1. Select the user program list.
2. Hold down the SET [C] or SET [A] button until the “JUMP
TO USER PROGRAM” popup window appears.
3. Press a right-hand register button to select a user
program.
* 5 1 0 0 0 4 7 2 7 0 - 0 1 *
Copyright © 2015 ROLAND CORPORATION
-
1
Roland FR-8x Owner's manual
- Type
- Owner's manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Panasonic SXPR54M Operating instructions
-
Technics SX-PR54/M User manual
-
-
-
Yamaha PSR-6000 Owner's manual
-
-
Korg microARRANGER Owner's manual
-
-
-
Korg Liverpool Owner's manual