Commell ADP-L2T User manual

Commell
Brand
Commell
Model
ADP-L2T
Type
User manual

Commell ADP-L2T is an adapter that allows you to connect an 18-bit TTL LCD panel to a motherboard with an LVDS interface. It supports panels with a resolution of up to 1920x1080 and a refresh rate of up to 60Hz. The adapter is also equipped with a backlight inverter, which allows you to power the LCD panel's backlight.

The ADP-L2T is a versatile adapter that can be used in a variety of applications, including:

  • Industrial automation: The ADP-L2T can be used to connect an LCD panel to a programmable logic controller (PLC) or other industrial automation device. This allows you to create custom user interfaces for your automation projects.

Commell ADP-L2T is an adapter that allows you to connect an 18-bit TTL LCD panel to a motherboard with an LVDS interface. It supports panels with a resolution of up to 1920x1080 and a refresh rate of up to 60Hz. The adapter is also equipped with a backlight inverter, which allows you to power the LCD panel's backlight.

The ADP-L2T is a versatile adapter that can be used in a variety of applications, including:

  • Industrial automation: The ADP-L2T can be used to connect an LCD panel to a programmable logic controller (PLC) or other industrial automation device. This allows you to create custom user interfaces for your automation projects.
ADP-L2T
User’s Manual
Edition 1.4
ADP-L2T User’s Manual
2
Copyright
Copyright 2008 all rights reserved. This document is copyrighted and all rights are reserved.
The information in this document is subject to change without prior notice to make
improvements to the products.
This document contains proprietary information and protected by copyright. No part of this
document may be reproduced, copied, or translated in any form or any means without prior
written permission of the manufacturer.
All trademarks and/or registered trademarks contains in this document are property of their
respective owners.
Disclaimer
The company shall not be liable for any incidental or consequential damages resulting from
the performance or use of this product.
The company does not issue a warranty of any kind, express or implied, including without
limitation implied warranties of merchantability or fitness for a particular purpose.
The company has the right to revise the manual or include changes in the specifications of
the product described within it at any time without notice and without obligation to notify any
person of such revision or changes.
Trademark
All trademarks are the property of their respective holders.
Any questions please visit our website at TU http://www.commell.com.twUT.
ADP-L2T User’s Manual
3
Packing List:
Hardware:
ADP-L2T adapter x1
Cable Kit:
Product Specification
General Specification
Panel
For 18-bit TTL LCD Panel
Dimensions (W x D)
31.50mm x 19.45mm
Temperature
Operating within 0~60 centigrade
Ordering Code
ADP-L2T
LVDS to TTL adapter for 18bit LCD with Hirose
DF13-40DP-1.25
Component Placement
CN_TFTC
JVLCDC
CN_LVDSC
To ADP-L2T “CN_LVDSC”
ADP-L2T User’s Manual
4
Mechanical Drawing
‘
‘
‘
‘
ADP-L2T User’s Manual
5
Connector Reference
Connector: CN_LVDSC
Type: onboard 20-pin connector for LVDS connector
Connector model: HIROSE DF13-20S
Pin
Signal
Pin
Signal
1
LCDVCC
2
LCDVCC
3
GND
4
GND
5
TX0-
6
TX0+
7
GND
8
TX1-
9
TX1+
10
GND
11
TX2-
12
TX2+
13
GND
14
TXC-
15
TXC+
16
GND
17
N/C
18
N/C
19
GND
20
GND
19 1
20 2
Connect to LVDS motherboard
ADP-L2T User’s Manual
6
Connector: JVLCDC – Voltage selection for CN_TFTC “TVCC” (Page 7)
(CN_LVDSC “LCDVCC” must be 5V as the preliminary requirements)
Type: 3-pin Power select Header
Pin
Description
1-2
VCC3 (3.3V)
2-3
VCC (5V)
Default: 1-2
ADP-L2T User’s Manual
7
Connector: CN_TFTC
Type: onboard 40-pin connector for LVDS connector
Connector model: HIROSE DF13-40S
Pin
Signal
Pin
Signal
1
N/C
2
N/C
3
GND
4
GND
5
TVCC
6
TVCC
7
GND
8
GND
9
N/C
10
N/C
11
PD2 (B0)
12
PD3 (B1)
13
PD4 (B2)
14
PD5 (B3)
15
PD6 (B4)
16
PD7 (B5)
17
N/C
18
N/C
19
PD10 (G0)
20
PD11 (G1)
21
PD12 (G2)
22
PD13 (G3)
23
PD14 (G4)
24
PD15 (G5)
25
N/C
26
N/C
27
PD18 (R0)
28
PD19 (R1)
29
PD20 (R2)
30
PD21 (R3)
31
PD22 (R4)
32
PD23 (R5)
33
N/C
34
N/C
35
DCLK
36
V sync
37
DE (RM)
38
H sync
39
GND
40
GND
1
1
2
39
40
Connect to TTL Panel
ADP-L2T User’s Manual
8
To setup the LCD, you need the component below:
1. A panel with LVDS interfaces.
2. An inverter for panel’s backlight power.
3. A LCD cable and an inverter cable.
For the cables, please follow the pin assignment of the connector to make a cable, because
every panel has its own pin assignment, so we do not provide a standard cable; please find
a local cable manufacture to make cables.
LCD Installation Guide:
1. Preparing the motherboard (LV-67B), LCD panel and the backlight inverter.
2. Please set the motherboard (LV-67B) jumper JVLCD to +5V
3. You would need a LVDS type cable.
4. To connect all of the devices well.
For sample illustrator only
Panel side
Board side
ADP-L2T User’s Manual Contact Information
Contact Information
9
Contact Information
Any advice or comment about our products and service, or anything
we can help you please don’t hesitate to contact with us. We will do
our best to support you for your products, projects and business.
Taiwan Commate Computer Inc.
Address
19F., No.94, Sec. 1, Xintai 5th Rd., Xizhi Dist., New Taipei City
22102, Taiwan (R.O.C.)
TEL
+886-2-26963909
FAX
+886-2-26963911
Website
TUhttp://www.commell.com.twUT
E-Mail
TUinfo@commell.com.twUT (General Information)
TUtech@commell.com.twUT (Technical Support)
Commell is the trademark of Taiwan Commate Computer INC.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9

Commell ADP-L2T User manual

Commell
Brand
Commell
Model
ADP-L2T
Type
User manual

Commell ADP-L2T is an adapter that allows you to connect an 18-bit TTL LCD panel to a motherboard with an LVDS interface. It supports panels with a resolution of up to 1920x1080 and a refresh rate of up to 60Hz. The adapter is also equipped with a backlight inverter, which allows you to power the LCD panel's backlight.

The ADP-L2T is a versatile adapter that can be used in a variety of applications, including:

  • Industrial automation: The ADP-L2T can be used to connect an LCD panel to a programmable logic controller (PLC) or other industrial automation device. This allows you to create custom user interfaces for your automation projects.
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents