La Crosse 616-146A User manual

Brand: La Crosse

Model: 616-146A

Category: Alarm clocks

Type: User manual

La Crosse Technology 616-146A is an atomic projection alarm clock that provides accurate timekeeping and a variety of features to enhance your bedroom experience. With its atomic clock synchronization, you can be sure that the time displayed is always precise. The projection feature allows you to project the time onto your ceiling or wall, making it easy to see from anywhere in the room. Additionally, the alarm clock includes a snooze function, backlight, and adjustable projection brightness for added convenience.

Model: 616-146A www.lacrossetechnology.com/support Page | 1

Model: 616-146A

Quick Setup Guide

DC: 070314

Atomic Projection Alarm Clock

BUTTONS

Snooze/Backlight

BACK

VIEW

AC Power Jack

HX-0500600U

Battery

Compartment

2 “AAA”

Time, Alarm

with Snooze

Indoor

Temperature +

Trends

Projection

Arm

Rotates 180°

Moon Phase

+ Calendar

FRONT

VIEW

USB

Charge

Port 0.5A

Model: 616-146A www.lacrossetechnology.com/support Page | 2

GET STARTED

Step 1: Insert the included 5-volt AC power adapter into projection alarm

and then into wall outlet.

Step 2: Insert 2 new “AAA” batteries (not included) into the projection alarm.

Observe the correct polarity.

Restart: If the indoor temperature is not displayed after 60 seconds, unplug

the AC adapter and remove batteries from the projection alarm, press a

button 20 times. After 15 minutes, return to Step 1 above.

SET TIME AND DATE

1. Hold the SET/°F/°C button to enter time set mode.

2. Use the +/TEMP or -/TIME buttons to adjust values.

Press and hold for fast adjustment.

3. Press the SET/°F/°C button to confirm adjustments and move to the next

item.

Time and Date setting order:

1. WWVB (ON/OFF)

2. Time Zone

3. DST Daylight Saving Time (ON/OFF)

4. 12/24 Hour Time Format

5. Hour

6. Minutes

7. Year

8. Month

9. Date

Note: Day of the week sets automatically.

Press the SET/°F/°C button to exit, or wait 20 seconds without pressing

buttons to return to the normal time display.

FAHRENHEIT/CELSIUS

Press the SET/°F/°C button to select Fahrenheit or Celsius

temperature display.

SET TIME ALARM

1. Hold the ALARM button to enter alarm time set mode.

2. Use the +/TEMP or -/TIME buttons to adjust values.

3. Press the ALARM button to confirm adjustments and move to the next

item.

Alarm Time setting order:

1. Hours

2. Minutes

Model: 616-146A www.lacrossetechnology.com/support Page | 3

ACTIVATE / DEACTIVATE TIME ALARM

• Press the ALARM button once to view alarm time.

• Press the ALARM button again to activate the alarm.

Bell icon appears.

• Press the ALARM button again to deactivate the alarm.

The bell icon disappears.

SNOOZE (Silences alarm temporarily)

• Press the SNOOZE/LIGHT button to silence alarm for 9 minutes.

• Zz will show.

• When in snooze mode, press ALARM to stop alarm for one day.

Note: The alarm is crescendo sound. The alarm will sound for 2 minutes and

then shut off completely.

BACKLIGHT AND PROJECTION INTENSITY

Press and release the SNOOZE/LIGHT button to adjust the brightness of the

backlight and projection image (together):

• ON High intensity

• ON Low intensity

• OFF

Note: When the Adapter is NOT in use, the High/Low/On/Off features are not

available.

PROJECTION (On/Off, rotate, projection mode)

Battery Power: Press and release the SNOOZE/LIGHT button to show the

projection for 10 seconds.

A/C Power: Projection is displayed constantly unless turned off.

Note: Using Battery power, the projection and backlight will come on for 10

seconds when SNOOZE/LIGHT is pressed. Projection will not display

constantly when operating on battery power.

Rotate Projection:

• Press the PROJECTION button to rotate the projection

image 90 degrees.

• Press the PROJECTION button again to rotate another 90

degrees.

Change Projection Modes: Hold, then release the PROJECTION button to

switch projection modes. Watch the projection image to view the changes.

• Time and Indoor Temperature: alternate every 5 seconds (default)

• Time

• Indoor Temperature

USB CHARGE PORT

Alarm

Bell Icon

Model: 616-146A www.lacrossetechnology.com/support Page | 4

Charge a smart phone, camera or other devices when the forecast station is

plugged into a power outlet with the included 5V AC adapter.

NOTE: This is a power-output charging port. It does not supply power to the

forecast station.

• Connect your external device’s USB charging cable (not included) to the

USB charging port.

• Charging times will vary.

• USB Power Output: 0.5A maximum current. Charge 0.5A devices or

devices that are self-regulating.

NOTE: Some USB cables are for data transfer only and cannot be used for

charging. Make sure that the USB cable you use will charge your device.

Most USB cables included with mobile devices will work for charging.

MOON PHASE

The moon phase is based on the year, month and date set (manually or by

the WWVB signal). These are the moon phases.

MANUAL WWVB RADIO-CONTROLLED TIME SEARCH

• Press the -/TIME button to start or stop a manual signal search.

WWVB Icon will flash

For information about WWVB visit:

www.nist.gov/pml/div688/grp40/wwvb.cfm

TEMPERATURE TREND INDICATORS

The temperature (2°F/1°C) trend indicators update every 30 minutes or less.

• Temperature has risen in the past 3 hours.

• Temperature has not changed in the past 3 hours.

• Temperature has fallen in the past 3 hours.

LOW BATTERY ICON

If the icon is displayed in Indoor Temperature section,

replace batteries in the projection clock.

CARE AND MAINTENANCE

Low

Battery

Icon

WWVB

Icon

Model: 616-146A www.lacrossetechnology.com/support Page | 5

• Do not mix old and new batteries

• Do not mix Alkaline, Standard, Lithium or Rechargeable Batteries

• Always purchase the correct size and grade of battery most suitable for

the intended use.

• Replace all batteries of a set at the same time.

• Clean the battery contacts and also those of the device prior to battery

installation.

• Ensure the batteries are installed correctly with regard to polarity

(+and -).

• Remove batteries from equipment with is not to be used for an extended

period of time.

• Remove used batteries promptly.

• Do not expose to extreme temperature, vibration or shock.

• Clean with a soft damp cloth. Do not use solvents or scouring agents.

• The product is not a toy. Keep it out of reach of children.

• The product is not to be used for medical purpose or for public

information. It is intended for home use only.

• The specs of this product may change without prior notice.

• Improper use or unauthorized opening of housing voids warranty.

• If the product is not working properly, change the batteries and/or check

the A/C cord connection.

SPECIFICATIONS

Indoor:

Temperature Range:

+32°F to +122°F (0°C to 50°C)

Interval:

About every 30 seconds

USB Charging Port

USB Output: 0.5 Amp maximum current

Power:

Projection Alarm

Primary Power:

AC: HX-0500600U

5-volt AC power adapter (included)

Optional/Battery Backup

Optional 3-AAA, IEC, LR3 batteries

(not included)

Battery Life:

Projection Alarm

Battery Backup:

Battery life is over 24 months when using

the AC adapter for primary power

Dimensions:

Projection Alarm:

5.23” L x 1.96” W x 4.33” H

(133 x 50 x 110 mm)

POSITION PROJECTION ALARM

Model: 616-146A www.lacrossetechnology.com/support Page | 6

• The projection alarm has a wide base to sit on a desk or table.

• Choose a location 6 feet or more from electronics such as cordless

phones, wireless gaming systems, televisions, microwaves, routers,

baby monitors, etc., which can prevent signal reception.

• Position near an exterior wall that faces Ft. Collins Colorado for WWVB

time signal reception.

WARRANTY AND SUPPORT

La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date

of purchase) on this product relating to manufacturing defects in materials &

workmanship.

View full warranty details online at:

www.lacrossetechnology.com/warranty_info.pdf

For warranty work, technical support or other information contact:

La Crosse Technology, Ltd

2830 South 26

La Crosse, WI 54601

Contact Support:

1-608-782-1610

Online Product Support:

www.lacrossetechnology.com/support

Product Registration:

www.lacrossetechnology.com/support/register

FCC STATEMENT

This Device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and (2)

the device must accept any interference received, including interference that may

cause undesired operation. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE

FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED

MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE

USER AUTHORITY TO OPERATE THE EQUIPMENT

excerpts, or duplicated or processed using electronic, mechanical or chemical

procedures without written permission of the publisher.

This handbook may contain mistakes and printing errors. The information in this

handbook is regularly checked and corrections made in the next issue. We accept no

liability for technical mistakes or printing errors, or their consequences.

La Crosse 616-146A User manual

Brand: La Crosse

Model: 616-146A

Category: Alarm clocks

Type: User manual

Download PDF

report

La Crosse 616-146A User manual

La Crosse 616-146A User manual

Related papers

Other documents