EAW MX8600 User manual

EAW
Brand
EAW
Model
MX8600
Type
User manual

This manual is also suitable for

EAW Jumpstart MX8600 is a professional-grade loudspeaker system that offers a range of features and capabilities to meet the demands of various applications.

With its advanced equalization (EQ) capabilities, the MX8600 allows for precise control over the frequency response of each input and output channel. The unit features multiple PEQ (parametric EQ) bands per channel, enabling users to adjust the gain, Q-factor, and frequency of specific frequency bands.

The MX8600 also provides comprehensive crossover functionality, allowing users to divide the audio signal into multiple frequency bands and route them to different output channels. This allows for flexible signal routing and optimization for various speaker configurations.

EAW Jumpstart MX8600 is a professional-grade loudspeaker system that offers a range of features and capabilities to meet the demands of various applications.

With its advanced equalization (EQ) capabilities, the MX8600 allows for precise control over the frequency response of each input and output channel. The unit features multiple PEQ (parametric EQ) bands per channel, enabling users to adjust the gain, Q-factor, and frequency of specific frequency bands.

The MX8600 also provides comprehensive crossover functionality, allowing users to divide the audio signal into multiple frequency bands and route them to different output channels. This allows for flexible signal routing and optimization for various speaker configurations.

Jumpstart
manual
MX8600 processor
LOADING A PRE-CONFIGURED SETTING
1. Connect AC power cord.
2. Turn unit on (power switch on back right panel).
3. Press MENU button. Use FREQ knob to scroll through the menu choices.
NOTE:Do not enter password locking until you are familiar with the unit.
4. Select MEMORY RECALL.Press ENTER button.
5. Use FREQ knob to locate desired memory location Press ENTER button. Memory is now recalled.
CREATING A NEW SETTING
Follow steps 1 – 3 above.
4. Select UNIT CONFIGURATION.
5. Use FREQ knob to select desired template (A,B,C,or D).Press ENTER button to edit the configuration.
6.Press ENTER button again to confirm choice.
7.Follow steps below to enter the desired settings.
MX8600 Jumpstart manual
MX8600 Jumpstart manual
EDITING A CONFIGURATION
1. Once the desired configuration is loaded,use the SCROLL button to move through inputs and outputs. Use the UP/DOWN buttons to select the desired
parameter of an input or output. Use FREQ, “Q”, and/or GAIN knobs to make changes to the desired parameters.
The chart below illustrates the general structure of MX8600 configurations.The number of PEQs per channel depends on CONFIGURATION A,B,C,D.
To store a setting,follow the same procedure (beginning at step 3) of LOADING A PRE-CONFIGURED SETTING on previous page.
INPUT A INPUT B OUTPUT 1 OUTPUT 2 OUTPUT 3 OUTPUT 4
PEQ 1 PEQ 1 HPF HPF HPF HPF
PEQ 2 PEQ 2 LPF LPF LPF LPF
PEQ 3 PEQ 3 PEQ 1 PEQ 1 PEQ 1 PEQ 1
PEQ 4 PEQ 4 PEQ 2 PEQ 2 GAIN/DELAY GAIN/DELAY
DELAY DELAY PEQ 3 PEQ 3 LIMITER LIMITER
GAIN/DELAY GAIN/DELAY
LIMITER LIMITER
STORING AND NAMING NEW OR NEWLY CHANGED CONFIGURATION
1. With the final,edited version of the desired configuration open,press MENU button and use FREQ knob to navigate to MEMORY STORE. Press ENTER button.
By default,the MX8600 displays the next unused memory location with the filename Noname.
2.Use FREQ knob to select the desired memory location.Press ENTER button.
3.Use FREQ knob to select the first character in your filename and press SCROLL button to enter it.Repeat for each character in your filename (16 characters
maximum).Press ENTER button.
Note:If the MX8600 remains idle for more than 15 seconds during this procedure,the configuration will be stored as whatever that memory location was
previously named.
MX8600 Jumpstart manual
EQinput A output 1delay x-over delay gain limit
output 2x-over delay gain limit
output 3
x-over delay gain limit
output 4
x-over delay gain limit
EQinput A
input B
output 1delay x-over delay gain limit
output 2x-over delay gain limit
output 3
x-over delay gain limit
output 4
x-over delay gain limit
EQinput A
input B
output 1delay x-over delay gain limit
output 2x-over delay gain limit
output 3
x-over delay gain limit
output 4
x-over delay gain limit
EQinput A output 1delay
EQinput B delay
x-over delay gain limit
output 3x-over delay gain limit
output 2
x-over delay gain limit
output 4
x-over delay gain limit
input A PEQ1,PEQ 2,PEQ 3,PEQ 4,base delay
1 hpf,lpf,PEQ 1,PEQ 2,PEQ 3,delay,gain,limit
2 hpf,lpf,PEQ 1,PEQ 2,PEQ 3,delay,gain,limit
3 hpf,lpf,PEQ 1,delay,gain,limit
4 hpf,lpf,PEQ 1,delay,gain,limit
input A PEQ1,PEQ 2,PEQ 3,PEQ 4,base delay
1 hpf,lpf,PEQ 1,PEQ 2,PEQ 3,delay,gain,limit
2 hpf,lpf,PEQ 1,PEQ 2,PEQ 3,delay,gain,limit
3 hpf,lpf,PEQ 1,delay,gain,limit
input B
4 hpf,lpf,PEQ 1,delay,gain,limit
input A PEQ1,PEQ 2,PEQ 3,PEQ 4,base delay
1 hpf,lpf,PEQ 1,PEQ 2,PEQ 3,delay,gain,limit
2 hpf,lpf,PEQ 1,PEQ 2,PEQ 3,delay,gain,limit
3 hpf,lpf,PEQ 1,delay,gain,limit
input B
4 hpf,lpf,PEQ 1,delay,gain,limit
input A PEQ1,PEQ 2,PEQ 3,PEQ 4,base delay
1 hpf,lpf,PEQ 1,PEQ 2,PEQ 3,delay,gain,limit
2 hpf,lpf,PEQ 1,PEQ 2,PEQ 3,delay,gain,limit
input B PEQ1,PEQ 2,PEQ 3,PEQ 4,base delay
3 hpf,lpf,PEQ 1,PEQ 2,PEQ 3,delay,gain,limit
4 hpf,lpf,PEQ 1,PEQ 2,PEQ 3,delay,gain,limit
EAW MX8600 TYPE A
EAW MX8600 TYPE B
EAW MX8600 TYPE C
EAW MX8600 TYPE D
MX8600 Jumpstart manual
MX8600 – HARDWARE RESET PROCESS
This is for units that are unuseable because:
1. The password has been lost.
2. The unit is “locked up”and power cycling,etc.does not clear it up.
Note that this procedure is a last resort. All data programmed into the unit will be lost,including memories.
1. Turn unit off.
2. Disconnect outputs.
3. Press and hold UP and SCROLL keys while switching power on.
4. BATTERY FAILEDmessage will appear in display.
5. Release UP and SCROLL keys.
6. Red lights on MENU ,SECTION and CHANNEL buttons will flash.
7. Press QUIT button.
8. Message appears WARNING FULL BANDWIDTH and DISCONNECT OUTPUTS IF NECESSARY.
9. Press QUIT again until *MX8600 PROCESSOR* CONFIGURATION - Aappears in display.
10. Turn unit off.
11. Turn unit on.
12. Program unit as required.
One Main Street,Whitinsville,MA 01588 tel: 800 992 5013 / 508 234 6158 fax: 508 234 8251 web: www.eaw.com
EUROPE: EAW International Ltd., tel: +44 1494 539090 fax: +44 1494 539091
The Laws of Physics | The Art of Listening
EAW is the worldwide technological and market leader in the design and manufacture of high-performance, professional loudspeaker systems.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

EAW MX8600 User manual

EAW
Brand
EAW
Model
MX8600
Type
User manual
This manual is also suitable for

EAW Jumpstart MX8600 is a professional-grade loudspeaker system that offers a range of features and capabilities to meet the demands of various applications.

With its advanced equalization (EQ) capabilities, the MX8600 allows for precise control over the frequency response of each input and output channel. The unit features multiple PEQ (parametric EQ) bands per channel, enabling users to adjust the gain, Q-factor, and frequency of specific frequency bands.

The MX8600 also provides comprehensive crossover functionality, allowing users to divide the audio signal into multiple frequency bands and route them to different output channels. This allows for flexible signal routing and optimization for various speaker configurations.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents