Supermicro Supero X8DTH-6F Quick Reference Manual

Brand: Supermicro

Model: Supero X8DTH-6F

Type: Quick Reference Manual

This manual is also suitable for

UPERMICR

ContaCt InformatIon

• www.supermicro.com(Email:[email protected])

• Manuals:http://www.supermicro.com/support/manuals

• Drivers&Utilities:ftp://ftp.supermicro.com

• Safety:http://www.supermicro.com/about/policies/safety_information.cfm

PaCkage Contents

(Appliestosingle-packonly)

X8DTH-6/-6F/-i/-iF

QuICk referenCe guIde

• One(1)SupermicroMotherboard

• One(1)USB2.0Cable

• One(1)COMPortCable

• Six(6)SerialATACables(X8DTH-i/-iF)

• Four(4)SerialATACables(X8DTH-6/-6F)

• Two(2)iPasstoSATACables(X8DTH-6/-6F)

• One(1)IOBackPanelShield

MNL-1083-QRG Rev.1.00

consent. All Trademarks are property of their respective entities. All information provided is deemed accurate at the time of printing; however, it is not guaranteed.

Rev. 1.00

SPI BIOS

I-SATA 1

I-SATA 0

I-SATA 5

I-SATA 4

JBT1

SATA-SGPIO1

DP5

LED5

DP4

JPL1

JPG1

JPS1

JWD

JI2C2

JI2C1

JOH1

JD1

LAN1

VGA

FAN5

KB/MS

P2-DIMM3A

FAN6

P2-DIMM3B

JPI2C1

JPW1

JPW2

FAN1

P2-DIMM2A

P2-DIMM2B

P2-DIMM1A

P2-DIMM1B

FAN7

COM1

JF1

IPMI LAN

USB0/1

P1-DIMM1B

P1-DIMM1A

FAN2

P1-DIMM2A

SMBus1

LAN2

FAN8

P1-DIMM3B

P1-DIMM3A

FAN3

Slot6 PCI-E 2.0 X8

Slot5 PCI-E 2.0 X8

Battery

Slot4 PCI-E 2.0 X8

Buzzer

Slot3 PCI-E 2.0 X8

FLASH

(IOH36D-1)

BMC

Slot2 PCI-E 2.0 X8

SAS0~3

ICH10R

SAS4~7

Slot1 PCI-E 2.0 X8

USB4/5

USB3

USB6/7

LSI

SAS2008

FAN4

JPW3

P1-DIMM2B

LAN CTRL

SAS

PHY

I-SATA 2

I-SATA 3

X8DTH

Rev. 2.01

SATA-SGPIO2

DP6

DP7

Intel

(South Bridge)

5520

Intel

(IOH36D-2)

5520

Intel

RAID Key

JL1

COM2

TPM

JHB1

JWOL1

JWF1

CPU1

CPU2

Motherboard Layout and Features

CPU Installation

DIMM Installation

Jumpers/Connectors/LED Indicators

Connectors

Memory Support

Insert the desired number of DIMMs into the memory slots, starting with P1-

DIMM1A. For memory to work properly, follow the tables below for memory

population order. Refer to the motherboard layout (at left) for the location of

the DIMM slots.

Memory Population for Optimal Performance

(For a motherboard with one CPU [CPU1] installed)

Branch 0 Branch 1 Branch 2

3 DIMMs P1 DIMM1A P1 DIMM2A P1 DIMM3A

6 DIMMs P1 DIMM1A P1 DIMM1B P1 DIMM2A P1 DIMM2B P1 DIMM3A P1 DIMM3B

Memory Population for Optimal Performance

(For a motherboard with two CPUs installed)

CPU1 CPU2

Branch 0 Branch 1 Branch 3 Branch 0 Branch 1 Branch 3

6 DIMMs 1A 2A 3A 1A 2A 3A

DIMMs

1A 1B 2A 2B 3A 3B 1A 1B 2A 2B 3A 3B

Note: Refer to Chapter 2 of the User Manual for detailed information on memory support and

CPU/motherboard installation instructions.

Heatsink Installation

Front Panel Control (JF1)

Note: Refer to Chapter 2 of the User Manual on detailed information on jumpers, connectors, and LED indicators.

Note: Graphics shown in this quick guide are for illustration only. Your components may or may not look exactly the same as drawings shown in this guide.

Back Panel IO Connectors

LED Indicators

Connectors Item# Description

Buzzer 33 Onboard Buzzer/Internal Speaker

COM1/COM2 4, 15 Serial Ports 1/2

FAN 1-4 43, 38, 34, 29 System/CPU Fan Headers

FAN 5-8 48, 47, 42, 9 System/CPU Fan Headers (Fans 7~8: CPU Fans)

IPMI LAN 3 IPMI Dedicated LAN (X8DTH-iF/6F only)

JD1 35 PWR LED/Speaker Header (Pins 1~3: PWR LED, Pins 4~7:

Speaker)

JF1 41 Front Panel Connector

JHB1 14 Front Panel IPMI Heartbeat LED Connection Header

JL1 30 Chassis Intrusion Header

JOH1 36 Overheat LED Header

JP I

C1 46 Power Supply SMBbus I

C Header

JPW1 45 24-pin ATX PWR

JPW2, JPW3 44 8-pin Secondary PWR

JWF1 23 SATA DOM (Disk-On-Module) Power Header

JWOL1 16 Wake-On-LAN Header

KB/MS 1 PS2 Keyboard/Mouse

LAN1/2, 6, 7 G-LAN (RJ45) Ports (Dedicated LAN: X8DTH-6F/iF)

I-SATA0 ~ I-SATA5 22 (Intel South Bridge) SATA Ports

RAIDKey 28 RAIDKey for RAID5 support (JIBTN1) (X8DTH-6/6F)

SAS Ports 0~3, 4~7 32, 31 SAS Ports 0~3, 4~7 (X8DTH-6/6F only)

SMBUS1 37 System Management Bus Header

SATA-SGPIO-1/-2 20 Serial General Purpose I/O Headers for SATA

TPM Header 12 Trusted Platform Module Header

USB 0/1, 3, 4/5, 6/7 2, 19, 18, 17 Universal Serial Bus (USB) Ports

VGA 5 VGA Connector

LED Item# Description State Status

DP4

40 Onbard Standby Power Green System Power On

DP5

11 BMC Activity LED Green: On BMC is Active

DP6

26 SAS Heartbeat LED Green: On SAS is Normal

DP7

25 SAS Error LED Red: On SAS Error Occurred

LED5

24 SAS Activity LED Green: On SAS is Active

Jumpers

This motherboard supports up to 192 GB of Registered (RDIMM) ECC or

up to 48 GB of Unbuffered (UDIMM) ECC/Non-ECC DDR3 800/1066/1333

MHz 3-channel (per CPU) memory in 12 DIMM slots.

Note: For memory optimization, use only DIMM modules that have been validated by

Supermicro. For the latest memory updates, please refer to our website at http://www.

supermicro.com/products/motherboard.

Note: Item num-

bers are listed in

counterclockwise

order.

= mounting hole

A. Keyboard F. COM 1

B. Mouse G. VGA

C. USB 0 H. LAN1

D. USB 1 I. LAN2

E. IPMI LAN

Motherboard

Screw#1

Screw#2

Mounting Hole

Screw#3

Screw#4

Jumper Item # Description Default

JBT1 21 Clear CMOS Open (Normal)

C1/JI

C2 10 SMB to PCI/PCI-E Slots Closed/Closed (Enabled)

JPG1 13 VGA Enable Pins 1-2 (Enabled)

JPL1 8 LAN1/2 Enable Pins 1-2 (Enabled)

JPS1 27 SAS2.0 Enable Pins 1-2 (Enabled) (X8DTH-6/-6F only)

JWD 39 Watch Dog Pins 1-2 (Reset)

Socket Keys

CPU Keys

Power Button

OH/Fan Fail LED

NIC1 LED

Reset Button

HDD LED

Power LED

Reset

PWR

Vcc

Ground

1920

Vcc

Ground

NMI

Vcc

PWR Fail LED

NIC2 LED

X8DTH-iF/6F only

Supermicro Supero X8DTH-6F Quick Reference Manual

Brand: Supermicro

Model: Supero X8DTH-6F

Type: Quick Reference Manual

This manual is also suitable for

Download PDF

report

Supermicro Supero X8DTH-6F Quick Reference Manual

This manual is also suitable for

Supermicro Supero X8DTH-6F Quick Reference Manual

Related papers

Other documents